May 2003 - sg16-avd - lists.packetizer.com

Further information on G8
by paulej＠PACKETIZER.COM 28 May '03

28 May '03

Folks, We received this message regarding the state of affairs in the city of Geneva over the next few days. Paul > Dear all > > Some of you might already have heard the following, but just in case please > let the delegates attending your meetings know: > > * ATM machines will be out of money as of tonight midnight. Banks will > be closed Thursday 29 May and Friday 30 May > > * The train to the Airport will NOT be running Saturday 31 May and > Sunday 1 June. There will be a bus. As you may know # 10 and # 18 buses also > go to the Airport > > * Only one unauthorized (non-violent according to the organizers) is > planned on Friday 30 May passing by the IOM, WIPO and WTO possibly at the > end of the morning. The number of demonstrators is not known. It is advised > for people not to leave the building. I'll keep you posted when I get more > information.

1 0

Re: T.140 -> 5-bit Baudot
by Rajesh Kumar 23 May '03

23 May '03

Team, At the TR.30.1 meeting in Arlington, VA we discussed the conversion of 5-bit Baudot to T.140/ISO 10646. Basically, we came to the same conclusion as Gunnar describes below. However, the simple padding of 0's does not work for characters such as a carriage return, does it? Of course, there are several characters in the T.140 ISO 10646-1 Basic/Extended Latin subset and other useful T.140 characters such as a missing character that do not have Baudot equivalents, and the consensus is to use an apostrophe for missing/untranslatable characters in Baudot, right? So there would be more than specifying a simple scheme that leverages the V.18 Annex A will not suffice, right? I am not sure if I am right here -- Fred Lucas was probably going to put together a Baudot <-> T.140 Unicode conversion table. Fred? Rajesh At 11:15 AM 5/23/2003 -0400, Paul E. Jones wrote: >Gunnar, > >I was looking for a defined specification. I think we need one to ensure >consistency. > >Paul > >----- Original Message ----- >From: <mailto:gunnar.hellstrom@omnitor.se>Gunnar Hellström >To: <mailto:paulej@packetizer.com>Paul E. Jones >Cc: <mailto:fred.lucas@worldnet.att.net>Fred Lucas ; ><mailto:asaks@waitrose.com>Andrea Saks ; ><mailto:chuk@dvttest.nb.rockwell.com>Keith Chu ; ><mailto:hwildfeu@cisco.com>Herb Wildfeuer ; ><mailto:rkumar@cisco.com>Rajesh Kumar >Sent: Friday, May 23, 2003 11:10 AM >Subject: SV: T.140 -> 5-bit Baudot > >Paul, > >I am not aware of any specific information about the 5-bit to Unicode >conversion. > >But it is straightforward, if you take the conversion tables from V.18 >Annex A, that goes between 5-bit and 7-bit T.50, and add your knowledge >that for all these 7-bit characters, the corresponding Unicode character >has the same value, just padded with 0 until it is 16 bits. > >Then you convert between Unicode UCS-16 and Unicode UTF-8 that is used in >T.140. I guess you have library functions for that. > >If you use V.18, the 5-bit to 7-bit is already there for you. > >The GSM implementation in the GTT feature must contain Unicode to 5-bit >conversion, but I do not think it is explicitly specified anywhere how it >is done. > >What do you want to find, code or specification? > >Gunnar > >------------------------------------------- >Gunnar Hellström, Omnitor, Renathvägen 2 >SE 121 37 Johanneshov, SWEDEN >Tel: +46 8 556 002 03 Mob: +46 708204288 >e-mail: gunnar.hellstrom(a)omnitor.se >web: www.omnitor.se > >-----Ursprungligt meddelande----- >Från: Paul E. Jones [mailto:paulej@packetizer.com] >Skickat: den 23 maj 2003 12:03 >Till: Gunnar Hellström >Kopia: Fred Lucas; Andrea Saks; Keith Chu; Herb Wildfeuer; Rajesh Kumar >Ämne: T.140 -> 5-bit Baudot > >Gunnar, > >It was said in the meeting that there is a way already defined to convert >between Unicode and 5-bit Baudot characters. I've not seen this >conversion. Can you point me to it? > >Paul >

1 0

Test
by paulej＠PACKETIZER.COM 23 May '03

23 May '03

This is a multi-part message in MIME format. ------=_NextPart_000_0AB7_01C32119.03E40500 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Test - Please Ignore ------=_NextPart_000_0AB7_01C32119.03E40500 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=3DContent-Type content=3D"text/html; = charset=3Diso-8859-1"> <META content=3D"MSHTML 6.00.2800.1170" name=3DGENERATOR> <STYLE></STYLE> </HEAD> <BODY bgColor=3D#ffffff> <DIV><FONT face=3DArial color=3D#008080 size=3D4><STRONG>Test - Please=20 Ignore</STRONG></FONT></DIV></BODY></HTML> ------=_NextPart_000_0AB7_01C32119.03E40500-- -------

1 0

Amendment 3 to H.222.0
by okubo＠msa.biglobe.ne.jp 16 May '03

16 May '03

Dear SG16 experts, I have placed "TD for Amd3 to H.222.0.zip" at <http://standard.pictel.com/ftp/avc-site/0305_Gen/>. This is for carrying H.264 video and to be consented at the meeting early 2004. Please note that this Amendment is relevant to new Draft H.241. -- Best regards, OKUBO Sakae e-mail: sokubo(a)waseda.jp Visiting Professor Graduate School of Science and Engineering Waseda University ******************************************************************* YRP Office GITI, Waseda University YRP Ichibankan 312 Tel: +81 46 847 5406 3-4 Hikarinooka, Yokosuka-shi, Kanagawa-ken Fax: +81 46 847 5413 239-0847 Japan *******************************************************************

1 0

ReMime-Version: 1.0
by okubo＠msa.biglobe.ne.jp 15 May '03

15 May '03

Dear SG16 experts, At 15:08 -0400 03/05/15, Kevin Boyle wrote: >I have uploaded the following 11 documents to the Pictel server: > >D-xxx_H.248.ICASC - New ICASC packages >D-xxx_H.460.9_annex_b - Proposed Annex B to H.460.9 >TD-xxx_H.248_IG - Current H.248 IG for approval >TD-xxx_H.248.1_Annex_F - Current version of ongoing ServiceChange work >TD-xxx_H.248.23_enhanced_alerting - New H.248.23 for consent >TD-xxx_H.248.24_MF_tones - New H.248.24 for consent >TD-xxx_H.248.25_basic_CAS - New H.248.25 for consent >TD-xxx_H.248.26_enhal_pkgs - New H.248.26 for consent >TD-xxx_H.248.27_supp_tones - New H.248.27 for consent >TD-xxx_H.248.ICAS - Updated ICAS packages >TD-xxx_H.248_srvchg_reqs - Considerations for ServiceChange work ("Annex F") They have been moved to <http://standard.pictel.com/ftp/avc-site/0305_Gen/> -- Best regards, OKUBO Sakae e-mail: sokubo(a)waseda.jp Visiting Professor Graduate School of Science and Engineering Waseda University ******************************************************************* YRP Office GITI, Waseda University YRP Ichibankan 312 Tel: +81 46 847 5406 3-4 Hikarinooka, Yokosuka-shi, Kanagawa-ken Fax: +81 46 847 5413 239-0847 Japan *******************************************************************

1 0

Two H.222.0 documents for consent
by okubo＠msa.biglobe.ne.jp 15 May '03

15 May '03

Dear SG16 experts, At 22:25 +0900 03/05/15, OKUBO Sakae wrote: >Attached please find the following two draft Recommendations for consent: > >Corrigendum to Amendment 1 to H.22.0|ISO/IEC 13818-1 >Amendment 2 to H.22.0|ISO/IEC 13818-1 These have been placed at <http://standard.pictel.com/ftp/avc-site/0305_Gen/> -- Best regards, OKUBO Sakae e-mail: sokubo(a)waseda.jp Visiting Professor Graduate School of Science and Engineering Waseda University ******************************************************************* YRP Office GITI, Waseda University YRP Ichibankan 312 Tel: +81 46 847 5406 3-4 Hikarinooka, Yokosuka-shi, Kanagawa-ken Fax: +81 46 847 5413 239-0847 Japan *******************************************************************

1 0

Test - please ignore
by paulej＠PACKETIZER.COM 15 May '03

15 May '03

This is a multi-part message in MIME format. ------=_NextPart_000_018B_01C31AC1.9097BEA0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Many apologies... please ignore this test message. ------=_NextPart_000_018B_01C31AC1.9097BEA0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=3DContent-Type content=3D"text/html; = charset=3Diso-8859-1"> <META content=3D"MSHTML 6.00.2800.1170" name=3DGENERATOR> <STYLE></STYLE> </HEAD> <BODY bgColor=3D#ffffff> <DIV><FONT color=3D#008080>Many apologies... please ignore this test=20 message.<BR></FONT></DIV></BODY></HTML> ------=_NextPart_000_018B_01C31AC1.9097BEA0--

1 0

ReMime-Version: 1.0
by okubo＠msa.biglobe.ne.jp 15 May '03

15 May '03

Dear SG16 experts, The file has been moved to <http://standard.pictel.com/ftp/avc-site/0305_Gen/>. Best regards, OKUBO Sakae e-mail: sokubo(a)waseda.jp Visiting Professor Graduate School of Science and Engineering Waseda University ******************************************************************* YRP Office GITI, Waseda University YRP Ichibankan 312 Tel: +81 46 847 5406 3-4 Hikarinooka, Yokosuka-shi, Kanagawa-ken Fax: +81 46 847 5413 239-0847 Japan ******************************************************************* At 17:07 +0900 03/05/15, YOSHIKAWA Tomoyuki wrote: >It is YOSHIKAWA Tomoyuki of NTT, Editor of H.246 Annex C. >[...] >Although it has become late, I send in order to bring up > the draft of H.246AnnexC for discussion to a meeting of next week. >I wishful think H.246 Annex C Version 2 will be approved > at next week meeting in Geneva. > >I wove some corrections shown after the meeting > in October into attached H.246 Annex C. > >Corrections applied already are referring to the following document. > >- Apply IEPS (Gen, Oct 2002 , TD-69(WP2)) . > 1) Section C.2 add reference to H.460.4 and E.106 . > 2) Section C.3 add abbreviation of "IEPS" . > 3) Table C.2 Calling Party's Category entry . > 4) Section C.6.1.1 under Calling Party's Category . > 5) Section C.7.1.1 Add new heading Calling Party's Category > after Calling Party Subaddress . > >- Apply Document AVD - 2308 (San Jose, Feb 2003 , TD-14b). >- Apply Document AVD - 2328 (San Jose, Feb 2003 , TD-14b). >- Apply Document AVD - 2329 (San Jose, Feb 2003 , TD-14b). >- Apply Document AVD - 2330 (San Jose, Feb 2003 , TD-14b). > >I am unable to participate to the meeting in next week > on the untoward schedules of other work. > >Although I am sorry, > I wonder if I could ask you for your announcing this draft. > >If the comment about this document can be obtained, > I will correct a document. > >I have a version in the middle of many corrections > about correction of this document. > >The following document is attached to this mail. >(these documents are already sent to TSB.) > >A cover and revised history: > -- [ TD-XX_DraftH.246AnnexC_cover.doc ] . > >Revised draft main part : > -- [ TD-XX_DraftH.246AnnexC_attachment_1.doc ] . > >The above-mentioned document is in the compressed file : > --- [ TD-XX_DraftH.246AnnexC.zip ] . >[..] > >-------------------------------------------------------- >YOSHIKAWA Tomoyuki >NTT >Network Service Systems Laboratories >E-Mail Address: yoshikawa.tomoyuki(a)lab.ntt.co.jp >TEL: +81-422-59-2094 FAX: +81-422-60-6033 >--------------------------------------------------------

1 0

FwdMime-Version: 1.0
by okubo＠msa.biglobe.ne.jp 15 May '03

15 May '03

Dear SG16 experts who are receiving messages from this list, This list is obviously administered by Cisco. Please contact Mr. Paul Jones <paulej(a)packetizer.com> in case of need regarding the list operation. When you post your message at this list, you must do so from the registered e-mail address. If you are receiving messages from the secondary reflector, and want to post your messages, please subscribe directly to the list by sending e-mail to: <mailto:Majordomo@cisco.com>Majordomo(a)cisco.com with "subscribe itu-sg16" (without quotation marks) in the body of the message. -- Best regards, OKUBO Sakae e-mail: sokubo(a)waseda.jp Visiting Professor Graduate School of Science and Engineering Waseda University ******************************************************************* YRP Office GITI, Waseda University YRP Ichibankan 312 Tel: +81 46 847 5406 3-4 Hikarinooka, Yokosuka-shi, Kanagawa-ken Fax: +81 46 847 5413 239-0847 Japan *******************************************************************

1 0

FwdMime-Version: 1.0
by okubo＠msa.biglobe.ne.jp 15 May '03

15 May '03

Dear SG16 experts, At 14:01 -0600 03/05/13, Robert R. Gilman wrote: >Would you please place the two attached files on the pictel >site for this month's meeting in Geneva? > >D-xxxH460-mlpp.zip >D-xxxH235AnnexH.zip They have been moved to <http://standard.pictel.com/ftp/avc-site/0305_Gen/> as requested. -- Best regards, OKUBO Sakae e-mail: sokubo(a)waseda.jp Visiting Professor Graduate School of Science and Engineering Waseda University ******************************************************************* YRP Office GITI, Waseda University YRP Ichibankan 312 Tel: +81 46 847 5406 3-4 Hikarinooka, Yokosuka-shi, Kanagawa-ken Fax: +81 46 847 5413 239-0847 Japan *******************************************************************

1 0