- h323plus - lists.packetizer.com

Re: [h323plus] MyPhone 0.4 Released
by JF NP 12 Feb '08

12 Feb '08

Simon, Unfortunately, even when the plugin codec code is called, MyPhone2 stills sending more video bandwidth than established. If I don´t move the camera, it sends about 50 kbps (the configured video bandwidth), but if I move the camera, to force sending I-Frames, the bandwidth increases until reaches more than twice the configured bandwidth. The same test works fine with the previous version of openh323 and MyPhone. What's happening? If you need them, I can send you Ethereal traces. Best regards, ----- Mensaje original ---- De: Simon Horne <s.horne(a)packetizer.com> Para: JF NP <jfnp090274(a)yahoo.es> CC: H323plus <h323plus(a)lists.packetizer.com> Enviado: martes, 12 de febrero, 2008 9:02:48 Asunto: RE: [h323plus] MyPhone 0.4 Released DIV { MARGIN:0px;} Ya'oops when a decendent is not a descendent. :( I have checked in a fix to h323plus CVS so the correct H323PluginVideoCodec::SetMaxBitRate() is called. Thanks again Simon -----Original Message----- From: h323plus-bounces(a)lists.packetizer.com [mailto:h323plus-bounces@lists.packetizer.com]On Behalf Of JF NP Sent: Tuesday, February 12, 2008 5:48 PM To: H323plus Subject: Re: [h323plus] MyPhone 0.4 Released Hi, Simon, I've traced down using the VS 2003 debugger, and the function which is being called is H323VideoCodec::SetmaxBitRate(), because the function OpenVideoChannel() receives a reference to H323VideoCodec, not to H323PluginVideoCodec. You can see this easily setting a breakpoint in this line codec.SetMaxBitRate(videoBitRate * 1024);, stepping into it and seeing the call stack. Here it is: > MyPhone.exe!H323VideoCodec::SetMaxBitRate(unsigned int bitRate=52428800) Line 737 C++ MyPhone.exe!CMyPhoneEndPoint::OpenVideoChannel(H323Connection & connection={...}, int isEncoding=1, H323VideoCodec & codec={...}) Line 522 + 0x1d C++ MyPhone.exe!H323Connection::OpenVideoChannel(int isEncoding=1, H323VideoCodec & codec={...}) Line 4361 C++ MyPhone.exe!H323VideoCodec::Open(H323Connection & connection={...}) Line 587 C++ MyPhone.exe!H323_RTPChannel::Open() Line 1171 + 0x18 C++ MyPhone.exe!H245NegLogicalChannel::OpenWhileLocked(const H323Capability & capability={...}, unsigned int sessionID=2, unsigned int replacementFor=0, unsigned int roleLabel=0) Line 843 + 0x19 C++ MyPhone.exe!H245NegLogicalChannel::Open(const H323Capability & capability={...}, unsigned int sessionID=2, unsigned int replacementFor=0, unsigned int roleLabel=0) Line 754 + 0x1b C++ MyPhone.exe!H245NegLogicalChannels::Open(const H323Capability & capability={...}, unsigned int sessionID=2, H323ChannelNumber & channelnumber={...}, unsigned int replacementFor=0, unsigned int roleLabel=0) Line 1285 C++ MyPhone.exe!H245NegLogicalChannels::Open(const H323Capability & capability={...}, unsigned int sessionID=2, unsigned int replacementFor=0) Line 1262 + 0x1d C++ MyPhone.exe!H323Connection::OpenLogicalChannel(const H323Capability & capability={...}, unsigned int sessionID=2, H323Channel::Directions dir=IsTransmitter) Line 4026 + 0x21 C++ MyPhone.exe!H323Connection::SelectDefaultLogicalChannel(unsigned int sessionID=2) Line 3978 + 0x18 C++ MyPhone.exe!H323Connection::OnSelectLogicalChannels() Line 3923 C++ MyPhone.exe!H323Connection::InternalEstablishedConnectionCheck() Line 3887 C++ MyPhone.exe!H323Connection::HandleControlData(PPER_Stream & strm={...}) Line 3040 C++ MyPhone.exe!H323Connection::HandleReceivedControlPDU(int readStatus=1, PPER_Stream & strm={...}) Line 2968 + 0x12 C++ MyPhone.exe!H323Connection::HandleControlChannel() Line 2950 + 0x13 C++ MyPhone.exe!H245TransportThread::Main() Line 694 C++ MyPhone.exe!PThread::MainFunction(void * threadPtr=0x0160fa48) Line 1268 C++ msvcr71d.dll!_threadstartex(void * ptd=0x0160ff48) Line 241 + 0xd C kernel32.dll!7c80b683() Best regards, ----- Mensaje original ---- De: Simon Horne <s.horne(a)packetizer.com> Para: JF NP <jfnp090274(a)yahoo.es> CC: H323plus <h323plus(a)lists.packetizer.com> Enviado: martes, 12 de febrero, 2008 2:09:55 Asunto: RE: [h323plus] MyPhone 0.4 Released H323PluginVideoCodec::SetMaxBitRate() sends a messages "Max Bit Rate" to the plugin codec to set the maximum bitrate. This function also overrides H323VideoCodec::SetMaxBitRate() since H323PluginVideoCodec is a descendent of H323VideoCodec so the problem most likely is in the plugin codec not setting the max bit rate. I suggest you look at the H.263 plugin codec perhaps there is something missing. Simon > -----Original Message----- > From: h323plus-bounces(a)lists.packetizer.com > [mailto:h323plus-bounces@lists.packetizer.com]On Behalf Of JF NP > Sent: Tuesday, February 12, 2008 2:50 AM > To: H323plus > Subject: Re: [h323plus] MyPhone 0.4 Released > > > Hi, > > I've downloaded the latest version of the plugin > codecs from the CVS, and I've seen that the frames are > being grabbed at 10 fps. > Additional testing has showed me that the problem > seems to be with the following line of code, in > CMyPhoneEndPoint::OpenVideoChannel: > codec.SetMaxBitRate(videoBitRate * 1024); > > I think that the problem is that codec is an instance > of H323VideoCodec, and the implementation of > H323VideoCodec::SetMaxBitRate does nothing but an > assignment. I think that what it should be called is > H323PluginVideoCodec::SetMaxBitRate, which is in fact > a descendant of H323VideoCodec. I've tried to do a > cast from H323VideoCodec to H323PluginVideoCodec, but > I get compilation erros due to the undefined class > H323PluginVideoCodec, because in fact it is defined in > a *.cxx file, not a *.h. > > Am I correct? Or am I missing something? > > Best regards, > > --- Simon Horne <s.horne(a)packetizer.com> escribió: > > > This is strange. The bitrate is sent to the plugin > > codec. What codec are you using? what version of > > h323plus and how old is your video plugin? I updated > > the H.263 plugin about a month or so ago, prior to > > that it just ignored these settings so that might be > > the problem. > > > > From the tracefile make sure the video frames are > > being grabbed at the right fps (for 10 fps every > > 100ms) > > > > Simon > > -----Original Message----- > > From: h323plus-bounces(a)lists.packetizer.com > > [mailto:h323plus-bounces@lists.packetizer.com]On > > Behalf Of JF NP > > Sent: Friday, February 08, 2008 8:57 PM > > To: H323plus > > Subject: Re: [h323plus] MyPhone 0.4 Released > > > > > > Hi, Simon: > > > > I've downloaded the latest CVS code with the > > support for bitrate, fps and Adaptive packet delay. > > But it seems that MyPhone2 is not using the > > settings. Let me explain this: > > 1. I've configured the following vlues for video: > > fps = 10, Maxbitrate =50 kbit/s. and quality = 15. > > Size = QCIF. > > 2. If I capture the video packets with Wireskark, > > I can see that the bitrate is about 300kbit/s. > > > > Where is the problem? Am I missing any additional > > setup? > > > > Best regards, > > > > > > ----- Mensaje original ---- > > De: Simon Horne <s.horne(a)packetizer.com> > > Para: JF NP <jfnp090274(a)yahoo.es>; H323plus > > <h323plus(a)lists.packetizer.com> > > Enviado: viernes, 8 de febrero, 2008 3:53:05 > > Asunto: RE: [h323plus] MyPhone 0.4 Released > > > > ï»¿ > > looks like you are right. > > I have added support for bitrate, fps and also > > adaptive packet delay to the CVS. > > > > Simon > > -----Original Message----- > > From: h323plus-bounces(a)lists.packetizer.com > > [mailto:h323plus-bounces@lists.packetizer.com]On > > Behalf Of JF NP > > Sent: Thursday, February 07, 2008 8:44 PM > > To: H323plus > > Subject: Re: [h323plus] MyPhone 0.4 Released > > > > > > Hi, > > > > I'v been looking at MyPhone2 0.4 source code, > > and I was wondering how is the videobitrate, fps, > > etc... managed, because I've seen that all of this > > parameters are read from the configuration, but they > > are never used. > > > > Best regards, > > > > > > ----- Mensaje original ---- > > De: Simon Horne <s.horne(a)packetizer.com> > > Para: H323plus <h323plus(a)lists.packetizer.com> > > Enviado: viernes, 1 de febrero, 2008 21:57:15 > > Asunto: [h323plus] MyPhone 0.4 Released > > > > > > Guys > > > > I have uploaded MyPhone 0.4 installer to the > > h323plus website to garnish > > some feedback on the upcoming 1.20 release on > > h323plus. > > Download here > > > > > http://www.h323plus.org/source/download/MyPhoneSetup04.exe > > (2.12Mb) > > > > Important Features > > Native NAT traversal with GnuGk : This uses the > > new GnuGk NAT module now in > > H323plus. You can send and receive calls behind > > a NAT when registered to > > GnuGk on the public internet. The only > > requirement is that you enable > > SupportNatedEndpoints in GnuGk. Note this is the > > GnuGk NAT Method > > http://www.gnugk.org/nat-traversal.html. It is > > not the standard H.460.18/19. > > > > Built off the latest h323plus CVS. (hopefully > > the baseline for v1.20) > > > > Notes: > > To run in debug mode start myphone with > > commandline switches -ttttt (number > > of t indicate tracelevel) > > After Install adjust the audio and video codecs > > to your preferred order. > > G.711 & H.261 are the default. > > > > The installer contains the full myphone2 source > > code. The exe was built with > > vs2003. If you wish to build it with a later > > version of visual studio, > > although not tested, you will need the $ version > > as the express version does > > not seem to support MFC. > > > > Hopefully next week if there are not too many > > problems we will do the > > snapshot and release v1.20. > > > > Simon > > > > > > > > > > > > > > > > > ------------------------------------------------------------------ > ---------- > > > > Â¿Con Mascota por primera vez? - SÃ© un mejor > > Amigo > > Entra en Yahoo! Respuestas. > > > > > > > > > > > > > ------------------------------------------------------------------ > ------------ > > > > Â¿Con Mascota por primera vez? - SÃ© un mejor > > Amigo > > Entra en Yahoo! Respuestas. > > > > > > > ______________________________________________ > ¿Con Mascota por primera vez? Sé un mejor Amigo. Entra en Yahoo! > Respuestas http://es.answers.yahoo.com/info/welcome ¿Con Mascota por primera vez? - Sé un mejor Amigo Entra en Yahoo! Respuestas. ______________________________________________ ¿Con Mascota por primera vez? Sé un mejor Amigo. Entra en Yahoo! Respuestas http://es.answers.yahoo.com/info/welcome

2 1

ptlib & h323plus compile problem on gcc 3.4.3
by Denis Kochmashev 12 Feb '08

12 Feb '08

Hello! Can't compile Ptlib plugins and H.323 Plus on RHEL4. Please suggest what should I do. Ptlib: make opt g++ -DP_USE_PRAGMA -D_REENTRANT -fno-exceptions -Wall -fPIC -DPIC -DNDEBUG -I/usr/local/dev/h323plus/ptlib/include \ -L/usr/local/dev/h323plus/ptlib/lib \ vidinput_names.cxx \ -I. -shared vidinput_v4l2.cxx -o ../pwlib/device/videoinput/v4l2_pwplugin.so In file included from vidinput_v4l2.cxx:143: vidinput_v4l2.h:165: error: field `videoCapability' has incomplete type vidinput_v4l2.h:166: error: field `videoStreamParm' has incomplete type vidinput_v4l2.cxx:217: error: `V4L2_PIX_FMT_GREY' was not declared in this scope vidinput_v4l2.cxx:218: error: `V4L2_PIX_FMT_RGB32' was not declared in this scope vidinput_v4l2.cxx:219: error: `V4L2_PIX_FMT_BGR32' was not declared in this scope vidinput_v4l2.cxx:220: error: `V4L2_PIX_FMT_RGB24' was not declared in this scope vidinput_v4l2.cxx:221: error: `V4L2_PIX_FMT_BGR24' was not declared in this scope vidinput_v4l2.cxx:222: error: `V4L2_PIX_FMT_RGB565' was not declared in this scope vidinput_v4l2.cxx:223: error: `V4L2_PIX_FMT_RGB555' was not declared in this scope vidinput_v4l2.cxx:224: error: `V4L2_PIX_FMT_Y41P' was not declared in this scope vidinput_v4l2.cxx:225: error: `V4L2_PIX_FMT_YUV411P' was not declared in this scope vidinput_v4l2.cxx:226: error: `V4L2_PIX_FMT_NV21' was not declared in this scope vidinput_v4l2.cxx:227: error: `V4L2_PIX_FMT_YUV420' was not declared in this scope vidinput_v4l2.cxx:228: error: `V4L2_PIX_FMT_YUYV' was not declared in this scope vidinput_v4l2.cxx:229: error: `V4L2_PIX_FMT_YUV422P' was not declared in this scope vidinput_v4l2.cxx:230: error: `V4L2_PIX_FMT_YUYV' was not declared in this scope vidinput_v4l2.cxx:231: error: `V4L2_PIX_FMT_JPEG' was not declared in this scope vidinput_v4l2.cxx:232: error: `v4l2_fourcc' was not declared in this scope vidinput_v4l2.cxx:233: error: `v4l2_fourcc' was not declared in this scope vidinput_v4l2.cxx:234: error: `V4L2_PIX_FMT_MJPEG' was not declared in this scope vidinput_v4l2.cxx:235: error: `V4L2_PIX_FMT_UYVY' was not declared in this scope vidinput_v4l2.cxx: In member function `virtual BOOL PVideoInputDevice_V4L2::Open(const PString&, BOOL)': vidinput_v4l2.cxx:270: error: `VIDIOC_QUERYCAP' undeclared (first use this function) vidinput_v4l2.cxx:270: error: (Each undeclared identifier is reported only once for each function it appears in.) vidinput_v4l2.cxx:270: error: `videoCapability' undeclared (first use this function) vidinput_v4l2.cxx:277: error: `V4L2_CAP_READWRITE' undeclared (first use this function) vidinput_v4l2.cxx:278: error: `V4L2_CAP_STREAMING' undeclared (first use this function) vidinput_v4l2.cxx:279: error: `V4L2_CAP_ASYNCIO' undeclared (first use this function) vidinput_v4l2.cxx:287: error: `videoStreamParm' undeclared (first use this function) vidinput_v4l2.cxx:287: error: `V4L2_BUF_TYPE_VIDEO_CAPTURE' undeclared (first use this function) vidinput_v4l2.cxx:288: error: `VIDIOC_G_PARM' undeclared (first use this function) vidinput_v4l2.cxx:295: error: `V4L2_CAP_TIMEPERFRAME' undeclared (first use this function) vidinput_v4l2.cxx: In member function `virtual BOOL PVideoInputDevice_V4L2::Start()': vidinput_v4l2.cxx:349: error: aggregate `v4l2_buffer buf' has incomplete type and cannot be defined vidinput_v4l2.cxx:353: error: `V4L2_BUF_TYPE_VIDEO_CAPTURE' undeclared (first use this function) vidinput_v4l2.cxx:354: error: `V4L2_MEMORY_MMAP' undeclared (first use this function) vidinput_v4l2.cxx:357: error: `VIDIOC_QBUF' undeclared (first use this function) vidinput_v4l2.cxx:365: error: use of enum `v4l2_buf_type' without previous declaration vidinput_v4l2.cxx:365: error: invalid type in declaration before ';' token vidinput_v4l2.cxx:368: error: `VIDIOC_STREAMON' undeclared (first use this function) vidinput_v4l2.cxx: In member function `virtual BOOL PVideoInputDevice_V4L2::Stop()': vidinput_v4l2.cxx:385: error: `V4L2_BUF_TYPE_VIDEO_CAPTURE' undeclared (first use this function) vidinput_v4l2.cxx:388: error: `VIDIOC_STREAMOFF' undeclared (first use this function) vidinput_v4l2.cxx: In member function `virtual BOOL PVideoInputDevice_V4L2::SetVideoFormat(PVideoDevice::VideoFormat)': vidinput_v4l2.cxx:434: error: `V4L2_STD_PAL' undeclared (first use this function) vidinput_v4l2.cxx:435: error: `V4L2_STD_NTSC' undeclared (first use this function) vidinput_v4l2.cxx:436: error: `V4L2_STD_SECAM' undeclared (first use this function) vidinput_v4l2.cxx:439: error: `VIDIOC_S_STD' undeclared (first use this function) vidinput_v4l2.cxx: In member function `virtual int PVideoInputDevice_V4L2::GetNumChannels()': vidinput_v4l2.cxx:454: error: aggregate `v4l2_input videoEnumInput' has incomplete type and cannot be defined vidinput_v4l2.cxx:457: error: `VIDIOC_ENUMINPUT' undeclared (first use this function) vidinput_v4l2.cxx: In member function `virtual BOOL PVideoInputDevice_V4L2::SetChannel(int)': vidinput_v4l2.cxx:479: error: `VIDIOC_S_INPUT' undeclared (first use this function) vidinput_v4l2.cxx: In member function `virtual BOOL PVideoInputDevice_V4L2::SetColourFormat(const PString&)': vidinput_v4l2.cxx:518: error: aggregate `v4l2_format videoFormat' has incomplete type and cannot be defined vidinput_v4l2.cxx:519: error: invalid application of `sizeof' to incomplete type `v4l2_format' vidinput_v4l2.cxx:520: error: `V4L2_BUF_TYPE_VIDEO_CAPTURE' undeclared (first use this function) vidinput_v4l2.cxx:523: error: aggregate `v4l2_streamparm streamParm' has incomplete type and cannot be defined vidinput_v4l2.cxx:526: error: `VIDIOC_G_PARM' undeclared (first use this function) vidinput_v4l2.cxx:527: error: `V4L2_CAP_TIMEPERFRAME' undeclared (first use this function) vidinput_v4l2.cxx:535: error: `VIDIOC_G_FMT' undeclared (first use this function) vidinput_v4l2.cxx:543: error: `VIDIOC_S_FMT' undeclared (first use this function) vidinput_v4l2.cxx:561: error: `VIDIOC_S_PARM' undeclared (first use this function) vidinput_v4l2.cxx: In member function `virtual BOOL PVideoInputDevice_V4L2::SetFrameRate(unsigned int)': vidinput_v4l2.cxx:589: error: `videoStreamParm' undeclared (first use this function) vidinput_v4l2.cxx:593: error: `VIDIOC_S_PARM' undeclared (first use this function) vidinput_v4l2.cxx: In member function `virtual BOOL PVideoInputDevice_V4L2::GetFrameSizeLimits(unsigned int&, unsigned int&, unsigned int&, unsigned int&)': vidinput_v4l2.cxx:619: error: aggregate `v4l2_format fmt' has incomplete type and cannot be defined vidinput_v4l2.cxx:620: error: `V4L2_BUF_TYPE_VIDEO_CAPTURE' undeclared (first use this function) vidinput_v4l2.cxx:621: error: `VIDIOC_G_FMT' undeclared (first use this function) vidinput_v4l2.cxx:626: error: `VIDIOC_TRY_FMT' undeclared (first use this function) vidinput_v4l2.cxx: In member function `BOOL PVideoInputDevice_V4L2::SetMapping()': vidinput_v4l2.cxx:671: error: aggregate `v4l2_requestbuffers reqbuf' has incomplete type and cannot be defined vidinput_v4l2.cxx:673: error: `V4L2_BUF_TYPE_VIDEO_CAPTURE' undeclared (first use this function) vidinput_v4l2.cxx:674: error: `V4L2_MEMORY_MMAP' undeclared (first use this function) vidinput_v4l2.cxx:676: error: `VIDIOC_REQBUFS' undeclared (first use this function) vidinput_v4l2.cxx:680: error: missing `>' to terminate the template argument list vidinput_v4l2.cxx:680: error: missing `>' to terminate the template argument list vidinput_v4l2.cxx:689: error: aggregate `v4l2_buffer buf' has incomplete type and cannot be defined vidinput_v4l2.cxx:696: error: `VIDIOC_QUERYBUF' undeclared (first use this function) vidinput_v4l2.cxx: In member function `void PVideoInputDevice_V4L2::ClearMapping()': vidinput_v4l2.cxx:721: error: aggregate `v4l2_buffer buf' has incomplete type and cannot be defined vidinput_v4l2.cxx:722: error: `V4L2_BUF_TYPE_VIDEO_CAPTURE' undeclared (first use this function) vidinput_v4l2.cxx:723: error: `V4L2_MEMORY_MMAP' undeclared (first use this function) vidinput_v4l2.cxx:726: error: `VIDIOC_QUERYBUF' undeclared (first use this function) vidinput_v4l2.cxx: In member function `virtual BOOL PVideoInputDevice_V4L2::GetFrameDataNoDelay(BYTE*, PINDEX*)': vidinput_v4l2.cxx:758: error: aggregate `v4l2_buffer buf' has incomplete type and cannot be defined vidinput_v4l2.cxx:759: error: invalid application of `sizeof' to incomplete type `v4l2_buffer' vidinput_v4l2.cxx:760: error: `V4L2_BUF_TYPE_VIDEO_CAPTURE' undeclared (first use this function) vidinput_v4l2.cxx:761: error: `V4L2_MEMORY_MMAP' undeclared (first use this function) vidinput_v4l2.cxx:764: error: `VIDIOC_DQBUF' undeclared (first use this function) vidinput_v4l2.cxx:789: error: `VIDIOC_QBUF' undeclared (first use this function) vidinput_v4l2.cxx: In member function `BOOL PVideoInputDevice_V4L2::VerifyHardwareFrameSize(unsigned int, unsigned int)': vidinput_v4l2.cxx:832: error: aggregate `v4l2_format videoFormat' has incomplete type and cannot be defined vidinput_v4l2.cxx:833: error: `V4L2_BUF_TYPE_VIDEO_CAPTURE' undeclared (first use this function) vidinput_v4l2.cxx:834: error: aggregate `v4l2_streamparm streamParm' has incomplete type and cannot be defined vidinput_v4l2.cxx:839: error: `VIDIOC_G_FMT' undeclared (first use this function) vidinput_v4l2.cxx:846: error: `VIDIOC_G_PARM' undeclared (first use this function) vidinput_v4l2.cxx:847: error: `V4L2_CAP_TIMEPERFRAME' undeclared (first use this function) vidinput_v4l2.cxx:858: error: `VIDIOC_S_FMT' undeclared (first use this function) vidinput_v4l2.cxx:878: error: `VIDIOC_S_PARM' undeclared (first use this function) vidinput_v4l2.cxx: In member function `int PVideoInputDevice_V4L2::GetControlCommon(unsigned int, int*)': vidinput_v4l2.cxx:902: error: aggregate `v4l2_queryctrl q' has incomplete type and cannot be defined vidinput_v4l2.cxx:903: error: invalid application of `sizeof' to incomplete type `v4l2_queryctrl' vidinput_v4l2.cxx:905: error: `VIDIOC_QUERYCTRL' undeclared (first use this function) vidinput_v4l2.cxx:908: error: aggregate `v4l2_control c' has incomplete type and cannot be defined vidinput_v4l2.cxx:909: error: invalid application of `sizeof' to incomplete type `v4l2_control' vidinput_v4l2.cxx:911: error: `VIDIOC_G_CTRL' undeclared (first use this function) vidinput_v4l2.cxx: In member function `virtual int PVideoInputDevice_V4L2::GetBrightness()': vidinput_v4l2.cxx:920: error: `V4L2_CID_BRIGHTNESS' undeclared (first use this function) vidinput_v4l2.cxx: In member function `virtual int PVideoInputDevice_V4L2::GetWhiteness()': vidinput_v4l2.cxx:925: error: `V4L2_CID_WHITENESS' undeclared (first use this function) vidinput_v4l2.cxx: In member function `virtual int PVideoInputDevice_V4L2::GetColour()': vidinput_v4l2.cxx:930: error: `V4L2_CID_SATURATION' undeclared (first use this function) vidinput_v4l2.cxx: In member function `virtual int PVideoInputDevice_V4L2::GetContrast()': vidinput_v4l2.cxx:935: error: `V4L2_CID_CONTRAST' undeclared (first use this function) vidinput_v4l2.cxx: In member function `virtual int PVideoInputDevice_V4L2::GetHue()': vidinput_v4l2.cxx:940: error: `V4L2_CID_HUE' undeclared (first use this function) vidinput_v4l2.cxx: In member function `BOOL PVideoInputDevice_V4L2::SetControlCommon(unsigned int, int)': vidinput_v4l2.cxx:961: error: aggregate `v4l2_queryctrl q' has incomplete type and cannot be defined vidinput_v4l2.cxx:962: error: invalid application of `sizeof' to incomplete type `v4l2_queryctrl' vidinput_v4l2.cxx:964: error: `VIDIOC_QUERYCTRL' undeclared (first use this function) vidinput_v4l2.cxx:967: error: aggregate `v4l2_control c' has incomplete type and cannot be defined vidinput_v4l2.cxx:968: error: invalid application of `sizeof' to incomplete type `v4l2_control' vidinput_v4l2.cxx:975: error: `VIDIOC_S_CTRL' undeclared (first use this function) vidinput_v4l2.cxx: In member function `virtual BOOL PVideoInputDevice_V4L2::SetBrightness(unsigned int)': vidinput_v4l2.cxx:983: error: `V4L2_CID_BRIGHTNESS' undeclared (first use this function) vidinput_v4l2.cxx: In member function `virtual BOOL PVideoInputDevice_V4L2::SetWhiteness(unsigned int)': vidinput_v4l2.cxx:991: error: `V4L2_CID_WHITENESS' undeclared (first use this function) vidinput_v4l2.cxx: In member function `virtual BOOL PVideoInputDevice_V4L2::SetColour(unsigned int)': vidinput_v4l2.cxx:1000: error: `V4L2_CID_SATURATION' undeclared (first use this function) vidinput_v4l2.cxx: In member function `virtual BOOL PVideoInputDevice_V4L2::SetContrast(unsigned int)': vidinput_v4l2.cxx:1008: error: `V4L2_CID_CONTRAST' undeclared (first use this function) vidinput_v4l2.cxx: In member function `virtual BOOL PVideoInputDevice_V4L2::SetHue(unsigned int)': vidinput_v4l2.cxx:1016: error: `V4L2_CID_HUE' undeclared (first use this function) vidinput_v4l2.cxx: In member function `virtual void V4L2Names::Update()': vidinput_v4l2.cxx:1092: error: aggregate `v4l2_capability videoCaps' has incomplete type and cannot be defined vidinput_v4l2.cxx:1095: error: `VIDIOC_QUERYCAP' undeclared (first use this function) vidinput_v4l2.cxx:1096: error: `V4L2_CAP_VIDEO_CAPTURE' undeclared (first use this function) vidinput_v4l2.cxx: In member function `virtual PString V4L2Names::BuildUserFriendly(PString)': vidinput_v4l2.cxx:1144: error: aggregate `v4l2_capability videocap' has incomplete type and cannot be defined vidinput_v4l2.cxx:1146: error: `VIDIOC_QUERYCAP' undeclared (first use this function) make[2]: *** [../pwlib/device/videoinput/v4l2_pwplugin.so] Error 1 make[2]: Leaving directory `/usr/local/dev/h323plus/ptlib_v1_12_0/plugins/vidinput_v4l2' make[1]: *** [opt] Error 2 make[1]: Leaving directory `/usr/local/dev/h323plus/ptlib_v1_12_0/plugins' make: *** [opt] Error 2 H.323 Plus: make opt g++ -DP_USE_PRAGMA -D_REENTRANT -fno-exceptions -Wall -fPIC -DPIC -DNDEBUG -DPTRACING -I/usr/local/dev/h323plus/openh323/include -I/usr/local/dev/h323plus/ptlib/include -Os -felide-constructors -Wreorder -c h323filetransfer.cxx -o /usr/local/dev/h323plus/openh323/lib/obj_linux_x86_r/h323filetransfer.o h323filetransfer.cxx: In member function `BOOL H323FileTransferCapability::OnReceivedPDU(const H245_GenericCapability&)': h323filetransfer.cxx:158: error: passing `const H245_ParameterIdentifier' as `this' argument of `PASN_Choice::operator PASN_Integer&()' discards qualifiers h323filetransfer.cxx:160: error: passing `const H245_ParameterValue' as `this' argument of `PASN_Choice::operator PASN_Integer&()' discards qualifiers h323filetransfer.cxx: In member function `virtual BOOL H323FileTransferChannel::Start()': h323filetransfer.cxx:302: warning: casting `H323Capability*' to `const H323FileTransferCapability&' does not dereference pointer h323filetransfer.cxx:305: warning: casting `H323Capability*' to `const H323FileTransferCapability&' does not dereference pointer h323filetransfer.cxx: In member function `H323FilePacket::opcodes H323FilePacket::GetPacketType()': h323filetransfer.cxx:1342: warning: cast to pointer from integer of different size make[1]: *** [/usr/local/dev/h323plus/openh323/lib/obj_linux_x86_r/h323filetransfer.o] Error 1 make[1]: Leaving directory `/usr/local/dev/h323plus/h323plus/src' make: *** [opt] Error 2 gcc -v Reading specs from /usr/lib/gcc/i386-redhat-linux/3.4.3/specs Configured with: ../configure --prefix=/usr --mandir=/usr/share/man --infodir=/usr/share/info --enable-shared --enable-threads=posix --disable-checking --with-system-zlib --enable-__cxa_atexit --disable-libunwind-exceptions --enable-java-awt=gtk --host=i386-redhat-linux Thread model: posix gcc version 3.4.3 20041212 (Red Hat 3.4.3-9.EL4)

4 5

Re: [h323plus] MyPhone 0.4 Released
by JF NP 12 Feb '08

12 Feb '08

I,m sorry, Simon. It was my mistake. Now, it seems to work. Thank you, ----- Mensaje original ---- De: Simon Horne <s.horne(a)packetizer.com> Para: JF NP <jfnp090274(a)yahoo.es> CC: H323plus <h323plus(a)lists.packetizer.com> Enviado: martes, 12 de febrero, 2008 9:02:48 Asunto: RE: [h323plus] MyPhone 0.4 Released DIV { MARGIN:0px;} Ya'oops when a decendent is not a descendent. :( I have checked in a fix to h323plus CVS so the correct H323PluginVideoCodec::SetMaxBitRate() is called. Thanks again Simon -----Original Message----- From: h323plus-bounces(a)lists.packetizer.com [mailto:h323plus-bounces@lists.packetizer.com]On Behalf Of JF NP Sent: Tuesday, February 12, 2008 5:48 PM To: H323plus Subject: Re: [h323plus] MyPhone 0.4 Released Hi, Simon, I've traced down using the VS 2003 debugger, and the function which is being called is H323VideoCodec::SetmaxBitRate(), because the function OpenVideoChannel() receives a reference to H323VideoCodec, not to H323PluginVideoCodec. You can see this easily setting a breakpoint in this line codec.SetMaxBitRate(videoBitRate * 1024);, stepping into it and seeing the call stack. Here it is: > MyPhone.exe!H323VideoCodec::SetMaxBitRate(unsigned int bitRate=52428800) Line 737 C++ MyPhone.exe!CMyPhoneEndPoint::OpenVideoChannel(H323Connection & connection={...}, int isEncoding=1, H323VideoCodec & codec={...}) Line 522 + 0x1d C++ MyPhone.exe!H323Connection::OpenVideoChannel(int isEncoding=1, H323VideoCodec & codec={...}) Line 4361 C++ MyPhone.exe!H323VideoCodec::Open(H323Connection & connection={...}) Line 587 C++ MyPhone.exe!H323_RTPChannel::Open() Line 1171 + 0x18 C++ MyPhone.exe!H245NegLogicalChannel::OpenWhileLocked(const H323Capability & capability={...}, unsigned int sessionID=2, unsigned int replacementFor=0, unsigned int roleLabel=0) Line 843 + 0x19 C++ MyPhone.exe!H245NegLogicalChannel::Open(const H323Capability & capability={...}, unsigned int sessionID=2, unsigned int replacementFor=0, unsigned int roleLabel=0) Line 754 + 0x1b C++ MyPhone.exe!H245NegLogicalChannels::Open(const H323Capability & capability={...}, unsigned int sessionID=2, H323ChannelNumber & channelnumber={...}, unsigned int replacementFor=0, unsigned int roleLabel=0) Line 1285 C++ MyPhone.exe!H245NegLogicalChannels::Open(const H323Capability & capability={...}, unsigned int sessionID=2, unsigned int replacementFor=0) Line 1262 + 0x1d C++ MyPhone.exe!H323Connection::OpenLogicalChannel(const H323Capability & capability={...}, unsigned int sessionID=2, H323Channel::Directions dir=IsTransmitter) Line 4026 + 0x21 C++ MyPhone.exe!H323Connection::SelectDefaultLogicalChannel(unsigned int sessionID=2) Line 3978 + 0x18 C++ MyPhone.exe!H323Connection::OnSelectLogicalChannels() Line 3923 C++ MyPhone.exe!H323Connection::InternalEstablishedConnectionCheck() Line 3887 C++ MyPhone.exe!H323Connection::HandleControlData(PPER_Stream & strm={...}) Line 3040 C++ MyPhone.exe!H323Connection::HandleReceivedControlPDU(int readStatus=1, PPER_Stream & strm={...}) Line 2968 + 0x12 C++ MyPhone.exe!H323Connection::HandleControlChannel() Line 2950 + 0x13 C++ MyPhone.exe!H245TransportThread::Main() Line 694 C++ MyPhone.exe!PThread::MainFunction(void * threadPtr=0x0160fa48) Line 1268 C++ msvcr71d.dll!_threadstartex(void * ptd=0x0160ff48) Line 241 + 0xd C kernel32.dll!7c80b683() Best regards, ----- Mensaje original ---- De: Simon Horne <s.horne(a)packetizer.com> Para: JF NP <jfnp090274(a)yahoo.es> CC: H323plus <h323plus(a)lists.packetizer.com> Enviado: martes, 12 de febrero, 2008 2:09:55 Asunto: RE: [h323plus] MyPhone 0.4 Released H323PluginVideoCodec::SetMaxBitRate() sends a messages "Max Bit Rate" to the plugin codec to set the maximum bitrate. This function also overrides H323VideoCodec::SetMaxBitRate() since H323PluginVideoCodec is a descendent of H323VideoCodec so the problem most likely is in the plugin codec not setting the max bit rate. I suggest you look at the H.263 plugin codec perhaps there is something missing. Simon > -----Original Message----- > From: h323plus-bounces(a)lists.packetizer.com > [mailto:h323plus-bounces@lists.packetizer.com]On Behalf Of JF NP > Sent: Tuesday, February 12, 2008 2:50 AM > To: H323plus > Subject: Re: [h323plus] MyPhone 0.4 Released > > > Hi, > > I've downloaded the latest version of the plugin > codecs from the CVS, and I've seen that the frames are > being grabbed at 10 fps. > Additional testing has showed me that the problem > seems to be with the following line of code, in > CMyPhoneEndPoint::OpenVideoChannel: > codec.SetMaxBitRate(videoBitRate * 1024); > > I think that the problem is that codec is an instance > of H323VideoCodec, and the implementation of > H323VideoCodec::SetMaxBitRate does nothing but an > assignment. I think that what it should be called is > H323PluginVideoCodec::SetMaxBitRate, which is in fact > a descendant of H323VideoCodec. I've tried to do a > cast from H323VideoCodec to H323PluginVideoCodec, but > I get compilation erros due to the undefined class > H323PluginVideoCodec, because in fact it is defined in > a *.cxx file, not a *.h. > > Am I correct? Or am I missing something? > > Best regards, > > --- Simon Horne <s.horne(a)packetizer.com> escribió: > > > This is strange. The bitrate is sent to the plugin > > codec. What codec are you using? what version of > > h323plus and how old is your video plugin? I updated > > the H.263 plugin about a month or so ago, prior to > > that it just ignored these settings so that might be > > the problem. > > > > From the tracefile make sure the video frames are > > being grabbed at the right fps (for 10 fps every > > 100ms) > > > > Simon > > -----Original Message----- > > From: h323plus-bounces(a)lists.packetizer.com > > [mailto:h323plus-bounces@lists.packetizer.com]On > > Behalf Of JF NP > > Sent: Friday, February 08, 2008 8:57 PM > > To: H323plus > > Subject: Re: [h323plus] MyPhone 0.4 Released > > > > > > Hi, Simon: > > > > I've downloaded the latest CVS code with the > > support for bitrate, fps and Adaptive packet delay. > > But it seems that MyPhone2 is not using the > > settings. Let me explain this: > > 1. I've configured the following vlues for video: > > fps = 10, Maxbitrate =50 kbit/s. and quality = 15. > > Size = QCIF. > > 2. If I capture the video packets with Wireskark, > > I can see that the bitrate is about 300kbit/s. > > > > Where is the problem? Am I missing any additional > > setup? > > > > Best regards, > > > > > > ----- Mensaje original ---- > > De: Simon Horne <s.horne(a)packetizer.com> > > Para: JF NP <jfnp090274(a)yahoo.es>; H323plus > > <h323plus(a)lists.packetizer.com> > > Enviado: viernes, 8 de febrero, 2008 3:53:05 > > Asunto: RE: [h323plus] MyPhone 0.4 Released > > > > ï»¿ > > looks like you are right. > > I have added support for bitrate, fps and also > > adaptive packet delay to the CVS. > > > > Simon > > -----Original Message----- > > From: h323plus-bounces(a)lists.packetizer.com > > [mailto:h323plus-bounces@lists.packetizer.com]On > > Behalf Of JF NP > > Sent: Thursday, February 07, 2008 8:44 PM > > To: H323plus > > Subject: Re: [h323plus] MyPhone 0.4 Released > > > > > > Hi, > > > > I'v been looking at MyPhone2 0.4 source code, > > and I was wondering how is the videobitrate, fps, > > etc... managed, because I've seen that all of this > > parameters are read from the configuration, but they > > are never used. > > > > Best regards, > > > > > > ----- Mensaje original ---- > > De: Simon Horne <s.horne(a)packetizer.com> > > Para: H323plus <h323plus(a)lists.packetizer.com> > > Enviado: viernes, 1 de febrero, 2008 21:57:15 > > Asunto: [h323plus] MyPhone 0.4 Released > > > > > > Guys > > > > I have uploaded MyPhone 0.4 installer to the > > h323plus website to garnish > > some feedback on the upcoming 1.20 release on > > h323plus. > > Download here > > > > > http://www.h323plus.org/source/download/MyPhoneSetup04.exe > > (2.12Mb) > > > > Important Features > > Native NAT traversal with GnuGk : This uses the > > new GnuGk NAT module now in > > H323plus. You can send and receive calls behind > > a NAT when registered to > > GnuGk on the public internet. The only > > requirement is that you enable > > SupportNatedEndpoints in GnuGk. Note this is the > > GnuGk NAT Method > > http://www.gnugk.org/nat-traversal.html. It is > > not the standard H.460.18/19. > > > > Built off the latest h323plus CVS. (hopefully > > the baseline for v1.20) > > > > Notes: > > To run in debug mode start myphone with > > commandline switches -ttttt (number > > of t indicate tracelevel) > > After Install adjust the audio and video codecs > > to your preferred order. > > G.711 & H.261 are the default. > > > > The installer contains the full myphone2 source > > code. The exe was built with > > vs2003. If you wish to build it with a later > > version of visual studio, > > although not tested, you will need the $ version > > as the express version does > > not seem to support MFC. > > > > Hopefully next week if there are not too many > > problems we will do the > > snapshot and release v1.20. > > > > Simon > > > > > > > > > > > > > > > > > ------------------------------------------------------------------ > ---------- > > > > Â¿Con Mascota por primera vez? - SÃ© un mejor > > Amigo > > Entra en Yahoo! Respuestas. > > > > > > > > > > > > > ------------------------------------------------------------------ > ------------ > > > > Â¿Con Mascota por primera vez? - SÃ© un mejor > > Amigo > > Entra en Yahoo! Respuestas. > > > > > > > ______________________________________________ > ¿Con Mascota por primera vez? Sé un mejor Amigo. Entra en Yahoo! > Respuestas http://es.answers.yahoo.com/info/welcome ¿Con Mascota por primera vez? - Sé un mejor Amigo Entra en Yahoo! Respuestas. ______________________________________________ ¿Con Mascota por primera vez? Sé un mejor Amigo. Entra en Yahoo! Respuestas http://es.answers.yahoo.com/info/welcome

1 0

Re: [h323plus] MyPhone 0.4 Released
by JF NP 12 Feb '08

12 Feb '08

Hi, Simon: I have downloaded the latest version from the CVS, and the problem remains the same. BR, ----- Mensaje original ---- De: Simon Horne <s.horne(a)packetizer.com> Para: JF NP <jfnp090274(a)yahoo.es> CC: H323plus <h323plus(a)lists.packetizer.com> Enviado: martes, 12 de febrero, 2008 9:02:48 Asunto: RE: [h323plus] MyPhone 0.4 Released DIV { MARGIN:0px;} Ya'oops when a decendent is not a descendent. :( I have checked in a fix to h323plus CVS so the correct H323PluginVideoCodec::SetMaxBitRate() is called. Thanks again Simon -----Original Message----- From: h323plus-bounces(a)lists.packetizer.com [mailto:h323plus-bounces@lists.packetizer.com]On Behalf Of JF NP Sent: Tuesday, February 12, 2008 5:48 PM To: H323plus Subject: Re: [h323plus] MyPhone 0.4 Released Hi, Simon, I've traced down using the VS 2003 debugger, and the function which is being called is H323VideoCodec::SetmaxBitRate(), because the function OpenVideoChannel() receives a reference to H323VideoCodec, not to H323PluginVideoCodec. You can see this easily setting a breakpoint in this line codec.SetMaxBitRate(videoBitRate * 1024);, stepping into it and seeing the call stack. Here it is: > MyPhone.exe!H323VideoCodec::SetMaxBitRate(unsigned int bitRate=52428800) Line 737 C++ MyPhone.exe!CMyPhoneEndPoint::OpenVideoChannel(H323Connection & connection={...}, int isEncoding=1, H323VideoCodec & codec={...}) Line 522 + 0x1d C++ MyPhone.exe!H323Connection::OpenVideoChannel(int isEncoding=1, H323VideoCodec & codec={...}) Line 4361 C++ MyPhone.exe!H323VideoCodec::Open(H323Connection & connection={...}) Line 587 C++ MyPhone.exe!H323_RTPChannel::Open() Line 1171 + 0x18 C++ MyPhone.exe!H245NegLogicalChannel::OpenWhileLocked(const H323Capability & capability={...}, unsigned int sessionID=2, unsigned int replacementFor=0, unsigned int roleLabel=0) Line 843 + 0x19 C++ MyPhone.exe!H245NegLogicalChannel::Open(const H323Capability & capability={...}, unsigned int sessionID=2, unsigned int replacementFor=0, unsigned int roleLabel=0) Line 754 + 0x1b C++ MyPhone.exe!H245NegLogicalChannels::Open(const H323Capability & capability={...}, unsigned int sessionID=2, H323ChannelNumber & channelnumber={...}, unsigned int replacementFor=0, unsigned int roleLabel=0) Line 1285 C++ MyPhone.exe!H245NegLogicalChannels::Open(const H323Capability & capability={...}, unsigned int sessionID=2, unsigned int replacementFor=0) Line 1262 + 0x1d C++ MyPhone.exe!H323Connection::OpenLogicalChannel(const H323Capability & capability={...}, unsigned int sessionID=2, H323Channel::Directions dir=IsTransmitter) Line 4026 + 0x21 C++ MyPhone.exe!H323Connection::SelectDefaultLogicalChannel(unsigned int sessionID=2) Line 3978 + 0x18 C++ MyPhone.exe!H323Connection::OnSelectLogicalChannels() Line 3923 C++ MyPhone.exe!H323Connection::InternalEstablishedConnectionCheck() Line 3887 C++ MyPhone.exe!H323Connection::HandleControlData(PPER_Stream & strm={...}) Line 3040 C++ MyPhone.exe!H323Connection::HandleReceivedControlPDU(int readStatus=1, PPER_Stream & strm={...}) Line 2968 + 0x12 C++ MyPhone.exe!H323Connection::HandleControlChannel() Line 2950 + 0x13 C++ MyPhone.exe!H245TransportThread::Main() Line 694 C++ MyPhone.exe!PThread::MainFunction(void * threadPtr=0x0160fa48) Line 1268 C++ msvcr71d.dll!_threadstartex(void * ptd=0x0160ff48) Line 241 + 0xd C kernel32.dll!7c80b683() Best regards, ----- Mensaje original ---- De: Simon Horne <s.horne(a)packetizer.com> Para: JF NP <jfnp090274(a)yahoo.es> CC: H323plus <h323plus(a)lists.packetizer.com> Enviado: martes, 12 de febrero, 2008 2:09:55 Asunto: RE: [h323plus] MyPhone 0.4 Released H323PluginVideoCodec::SetMaxBitRate() sends a messages "Max Bit Rate" to the plugin codec to set the maximum bitrate. This function also overrides H323VideoCodec::SetMaxBitRate() since H323PluginVideoCodec is a descendent of H323VideoCodec so the problem most likely is in the plugin codec not setting the max bit rate. I suggest you look at the H.263 plugin codec perhaps there is something missing. Simon > -----Original Message----- > From: h323plus-bounces(a)lists.packetizer.com > [mailto:h323plus-bounces@lists.packetizer.com]On Behalf Of JF NP > Sent: Tuesday, February 12, 2008 2:50 AM > To: H323plus > Subject: Re: [h323plus] MyPhone 0.4 Released > > > Hi, > > I've downloaded the latest version of the plugin > codecs from the CVS, and I've seen that the frames are > being grabbed at 10 fps. > Additional testing has showed me that the problem > seems to be with the following line of code, in > CMyPhoneEndPoint::OpenVideoChannel: > codec.SetMaxBitRate(videoBitRate * 1024); > > I think that the problem is that codec is an instance > of H323VideoCodec, and the implementation of > H323VideoCodec::SetMaxBitRate does nothing but an > assignment. I think that what it should be called is > H323PluginVideoCodec::SetMaxBitRate, which is in fact > a descendant of H323VideoCodec. I've tried to do a > cast from H323VideoCodec to H323PluginVideoCodec, but > I get compilation erros due to the undefined class > H323PluginVideoCodec, because in fact it is defined in > a *.cxx file, not a *.h. > > Am I correct? Or am I missing something? > > Best regards, > > --- Simon Horne <s.horne(a)packetizer.com> escribió: > > > This is strange. The bitrate is sent to the plugin > > codec. What codec are you using? what version of > > h323plus and how old is your video plugin? I updated > > the H.263 plugin about a month or so ago, prior to > > that it just ignored these settings so that might be > > the problem. > > > > From the tracefile make sure the video frames are > > being grabbed at the right fps (for 10 fps every > > 100ms) > > > > Simon > > -----Original Message----- > > From: h323plus-bounces(a)lists.packetizer.com > > [mailto:h323plus-bounces@lists.packetizer.com]On > > Behalf Of JF NP > > Sent: Friday, February 08, 2008 8:57 PM > > To: H323plus > > Subject: Re: [h323plus] MyPhone 0.4 Released > > > > > > Hi, Simon: > > > > I've downloaded the latest CVS code with the > > support for bitrate, fps and Adaptive packet delay. > > But it seems that MyPhone2 is not using the > > settings. Let me explain this: > > 1. I've configured the following vlues for video: > > fps = 10, Maxbitrate =50 kbit/s. and quality = 15. > > Size = QCIF. > > 2. If I capture the video packets with Wireskark, > > I can see that the bitrate is about 300kbit/s. > > > > Where is the problem? Am I missing any additional > > setup? > > > > Best regards, > > > > > > ----- Mensaje original ---- > > De: Simon Horne <s.horne(a)packetizer.com> > > Para: JF NP <jfnp090274(a)yahoo.es>; H323plus > > <h323plus(a)lists.packetizer.com> > > Enviado: viernes, 8 de febrero, 2008 3:53:05 > > Asunto: RE: [h323plus] MyPhone 0.4 Released > > > > ï»¿ > > looks like you are right. > > I have added support for bitrate, fps and also > > adaptive packet delay to the CVS. > > > > Simon > > -----Original Message----- > > From: h323plus-bounces(a)lists.packetizer.com > > [mailto:h323plus-bounces@lists.packetizer.com]On > > Behalf Of JF NP > > Sent: Thursday, February 07, 2008 8:44 PM > > To: H323plus > > Subject: Re: [h323plus] MyPhone 0.4 Released > > > > > > Hi, > > > > I'v been looking at MyPhone2 0.4 source code, > > and I was wondering how is the videobitrate, fps, > > etc... managed, because I've seen that all of this > > parameters are read from the configuration, but they > > are never used. > > > > Best regards, > > > > > > ----- Mensaje original ---- > > De: Simon Horne <s.horne(a)packetizer.com> > > Para: H323plus <h323plus(a)lists.packetizer.com> > > Enviado: viernes, 1 de febrero, 2008 21:57:15 > > Asunto: [h323plus] MyPhone 0.4 Released > > > > > > Guys > > > > I have uploaded MyPhone 0.4 installer to the > > h323plus website to garnish > > some feedback on the upcoming 1.20 release on > > h323plus. > > Download here > > > > > http://www.h323plus.org/source/download/MyPhoneSetup04.exe > > (2.12Mb) > > > > Important Features > > Native NAT traversal with GnuGk : This uses the > > new GnuGk NAT module now in > > H323plus. You can send and receive calls behind > > a NAT when registered to > > GnuGk on the public internet. The only > > requirement is that you enable > > SupportNatedEndpoints in GnuGk. Note this is the > > GnuGk NAT Method > > http://www.gnugk.org/nat-traversal.html. It is > > not the standard H.460.18/19. > > > > Built off the latest h323plus CVS. (hopefully > > the baseline for v1.20) > > > > Notes: > > To run in debug mode start myphone with > > commandline switches -ttttt (number > > of t indicate tracelevel) > > After Install adjust the audio and video codecs > > to your preferred order. > > G.711 & H.261 are the default. > > > > The installer contains the full myphone2 source > > code. The exe was built with > > vs2003. If you wish to build it with a later > > version of visual studio, > > although not tested, you will need the $ version > > as the express version does > > not seem to support MFC. > > > > Hopefully next week if there are not too many > > problems we will do the > > snapshot and release v1.20. > > > > Simon > > > > > > > > > > > > > > > > > ------------------------------------------------------------------ > ---------- > > > > Â¿Con Mascota por primera vez? - SÃ© un mejor > > Amigo > > Entra en Yahoo! Respuestas. > > > > > > > > > > > > > ------------------------------------------------------------------ > ------------ > > > > Â¿Con Mascota por primera vez? - SÃ© un mejor > > Amigo > > Entra en Yahoo! Respuestas. > > > > > > > ______________________________________________ > ¿Con Mascota por primera vez? Sé un mejor Amigo. Entra en Yahoo! > Respuestas http://es.answers.yahoo.com/info/welcome ¿Con Mascota por primera vez? - Sé un mejor Amigo Entra en Yahoo! Respuestas. ______________________________________________ ¿Con Mascota por primera vez? Sé un mejor Amigo. Entra en Yahoo! Respuestas http://es.answers.yahoo.com/info/welcome

1 0

Re: [h323plus] MyPhone 0.4 Released
by JF NP 12 Feb '08

12 Feb '08

Hi, Simon, I've traced down using the VS 2003 debugger, and the function which is being called is H323VideoCodec::SetmaxBitRate(), because the function OpenVideoChannel() receives a reference to H323VideoCodec, not to H323PluginVideoCodec. You can see this easily setting a breakpoint in this line codec.SetMaxBitRate(videoBitRate * 1024);, stepping into it and seeing the call stack. Here it is: > MyPhone.exe!H323VideoCodec::SetMaxBitRate(unsigned int bitRate=52428800) Line 737 C++ MyPhone.exe!CMyPhoneEndPoint::OpenVideoChannel(H323Connection & connection={...}, int isEncoding=1, H323VideoCodec & codec={...}) Line 522 + 0x1d C++ MyPhone.exe!H323Connection::OpenVideoChannel(int isEncoding=1, H323VideoCodec & codec={...}) Line 4361 C++ MyPhone.exe!H323VideoCodec::Open(H323Connection & connection={...}) Line 587 C++ MyPhone.exe!H323_RTPChannel::Open() Line 1171 + 0x18 C++ MyPhone.exe!H245NegLogicalChannel::OpenWhileLocked(const H323Capability & capability={...}, unsigned int sessionID=2, unsigned int replacementFor=0, unsigned int roleLabel=0) Line 843 + 0x19 C++ MyPhone.exe!H245NegLogicalChannel::Open(const H323Capability & capability={...}, unsigned int sessionID=2, unsigned int replacementFor=0, unsigned int roleLabel=0) Line 754 + 0x1b C++ MyPhone.exe!H245NegLogicalChannels::Open(const H323Capability & capability={...}, unsigned int sessionID=2, H323ChannelNumber & channelnumber={...}, unsigned int replacementFor=0, unsigned int roleLabel=0) Line 1285 C++ MyPhone.exe!H245NegLogicalChannels::Open(const H323Capability & capability={...}, unsigned int sessionID=2, unsigned int replacementFor=0) Line 1262 + 0x1d C++ MyPhone.exe!H323Connection::OpenLogicalChannel(const H323Capability & capability={...}, unsigned int sessionID=2, H323Channel::Directions dir=IsTransmitter) Line 4026 + 0x21 C++ MyPhone.exe!H323Connection::SelectDefaultLogicalChannel(unsigned int sessionID=2) Line 3978 + 0x18 C++ MyPhone.exe!H323Connection::OnSelectLogicalChannels() Line 3923 C++ MyPhone.exe!H323Connection::InternalEstablishedConnectionCheck() Line 3887 C++ MyPhone.exe!H323Connection::HandleControlData(PPER_Stream & strm={...}) Line 3040 C++ MyPhone.exe!H323Connection::HandleReceivedControlPDU(int readStatus=1, PPER_Stream & strm={...}) Line 2968 + 0x12 C++ MyPhone.exe!H323Connection::HandleControlChannel() Line 2950 + 0x13 C++ MyPhone.exe!H245TransportThread::Main() Line 694 C++ MyPhone.exe!PThread::MainFunction(void * threadPtr=0x0160fa48) Line 1268 C++ msvcr71d.dll!_threadstartex(void * ptd=0x0160ff48) Line 241 + 0xd C kernel32.dll!7c80b683() Best regards, ----- Mensaje original ---- De: Simon Horne <s.horne(a)packetizer.com> Para: JF NP <jfnp090274(a)yahoo.es> CC: H323plus <h323plus(a)lists.packetizer.com> Enviado: martes, 12 de febrero, 2008 2:09:55 Asunto: RE: [h323plus] MyPhone 0.4 Released H323PluginVideoCodec::SetMaxBitRate() sends a messages "Max Bit Rate" to the plugin codec to set the maximum bitrate. This function also overrides H323VideoCodec::SetMaxBitRate() since H323PluginVideoCodec is a descendent of H323VideoCodec so the problem most likely is in the plugin codec not setting the max bit rate. I suggest you look at the H.263 plugin codec perhaps there is something missing. Simon > -----Original Message----- > From: h323plus-bounces(a)lists.packetizer.com > [mailto:h323plus-bounces@lists.packetizer.com]On Behalf Of JF NP > Sent: Tuesday, February 12, 2008 2:50 AM > To: H323plus > Subject: Re: [h323plus] MyPhone 0.4 Released > > > Hi, > > I've downloaded the latest version of the plugin > codecs from the CVS, and I've seen that the frames are > being grabbed at 10 fps. > Additional testing has showed me that the problem > seems to be with the following line of code, in > CMyPhoneEndPoint::OpenVideoChannel: > codec.SetMaxBitRate(videoBitRate * 1024); > > I think that the problem is that codec is an instance > of H323VideoCodec, and the implementation of > H323VideoCodec::SetMaxBitRate does nothing but an > assignment. I think that what it should be called is > H323PluginVideoCodec::SetMaxBitRate, which is in fact > a descendant of H323VideoCodec. I've tried to do a > cast from H323VideoCodec to H323PluginVideoCodec, but > I get compilation erros due to the undefined class > H323PluginVideoCodec, because in fact it is defined in > a *.cxx file, not a *.h. > > Am I correct? Or am I missing something? > > Best regards, > > --- Simon Horne <s.horne(a)packetizer.com> escribió: > > > This is strange. The bitrate is sent to the plugin > > codec. What codec are you using? what version of > > h323plus and how old is your video plugin? I updated > > the H.263 plugin about a month or so ago, prior to > > that it just ignored these settings so that might be > > the problem. > > > > From the tracefile make sure the video frames are > > being grabbed at the right fps (for 10 fps every > > 100ms) > > > > Simon > > -----Original Message----- > > From: h323plus-bounces(a)lists.packetizer.com > > [mailto:h323plus-bounces@lists.packetizer.com]On > > Behalf Of JF NP > > Sent: Friday, February 08, 2008 8:57 PM > > To: H323plus > > Subject: Re: [h323plus] MyPhone 0.4 Released > > > > > > Hi, Simon: > > > > I've downloaded the latest CVS code with the > > support for bitrate, fps and Adaptive packet delay. > > But it seems that MyPhone2 is not using the > > settings. Let me explain this: > > 1. I've configured the following vlues for video: > > fps = 10, Maxbitrate =50 kbit/s. and quality = 15. > > Size = QCIF. > > 2. If I capture the video packets with Wireskark, > > I can see that the bitrate is about 300kbit/s. > > > > Where is the problem? Am I missing any additional > > setup? > > > > Best regards, > > > > > > ----- Mensaje original ---- > > De: Simon Horne <s.horne(a)packetizer.com> > > Para: JF NP <jfnp090274(a)yahoo.es>; H323plus > > <h323plus(a)lists.packetizer.com> > > Enviado: viernes, 8 de febrero, 2008 3:53:05 > > Asunto: RE: [h323plus] MyPhone 0.4 Released > > > > ï»¿ > > looks like you are right. > > I have added support for bitrate, fps and also > > adaptive packet delay to the CVS. > > > > Simon > > -----Original Message----- > > From: h323plus-bounces(a)lists.packetizer.com > > [mailto:h323plus-bounces@lists.packetizer.com]On > > Behalf Of JF NP > > Sent: Thursday, February 07, 2008 8:44 PM > > To: H323plus > > Subject: Re: [h323plus] MyPhone 0.4 Released > > > > > > Hi, > > > > I'v been looking at MyPhone2 0.4 source code, > > and I was wondering how is the videobitrate, fps, > > etc... managed, because I've seen that all of this > > parameters are read from the configuration, but they > > are never used. > > > > Best regards, > > > > > > ----- Mensaje original ---- > > De: Simon Horne <s.horne(a)packetizer.com> > > Para: H323plus <h323plus(a)lists.packetizer.com> > > Enviado: viernes, 1 de febrero, 2008 21:57:15 > > Asunto: [h323plus] MyPhone 0.4 Released > > > > > > Guys > > > > I have uploaded MyPhone 0.4 installer to the > > h323plus website to garnish > > some feedback on the upcoming 1.20 release on > > h323plus. > > Download here > > > > > http://www.h323plus.org/source/download/MyPhoneSetup04.exe > > (2.12Mb) > > > > Important Features > > Native NAT traversal with GnuGk : This uses the > > new GnuGk NAT module now in > > H323plus. You can send and receive calls behind > > a NAT when registered to > > GnuGk on the public internet. The only > > requirement is that you enable > > SupportNatedEndpoints in GnuGk. Note this is the > > GnuGk NAT Method > > http://www.gnugk.org/nat-traversal.html. It is > > not the standard H.460.18/19. > > > > Built off the latest h323plus CVS. (hopefully > > the baseline for v1.20) > > > > Notes: > > To run in debug mode start myphone with > > commandline switches -ttttt (number > > of t indicate tracelevel) > > After Install adjust the audio and video codecs > > to your preferred order. > > G.711 & H.261 are the default. > > > > The installer contains the full myphone2 source > > code. The exe was built with > > vs2003. If you wish to build it with a later > > version of visual studio, > > although not tested, you will need the $ version > > as the express version does > > not seem to support MFC. > > > > Hopefully next week if there are not too many > > problems we will do the > > snapshot and release v1.20. > > > > Simon > > > > > > > > > > > > > > > > > ------------------------------------------------------------------ > ---------- > > > > Â¿Con Mascota por primera vez? - SÃ© un mejor > > Amigo > > Entra en Yahoo! Respuestas. > > > > > > > > > > > > > ------------------------------------------------------------------ > ------------ > > > > Â¿Con Mascota por primera vez? - SÃ© un mejor > > Amigo > > Entra en Yahoo! Respuestas. > > > > > > > ______________________________________________ > ¿Con Mascota por primera vez? Sé un mejor Amigo. Entra en Yahoo! > Respuestas http://es.answers.yahoo.com/info/welcome ______________________________________________ ¿Con Mascota por primera vez? Sé un mejor Amigo. Entra en Yahoo! Respuestas http://es.answers.yahoo.com/info/welcome

2 1

Re: [h323plus] MyPhone 0.4 Released
by JF NP 11 Feb '08

11 Feb '08

Hi, Simon: I've downloaded the latest CVS code with the support for bitrate, fps and Adaptive packet delay. But it seems that MyPhone2 is not using the settings. Let me explain this: 1. I've configured the following vlues for video: fps = 10, Maxbitrate =50 kbit/s. and quality = 15. Size = QCIF. 2. If I capture the video packets with Wireskark, I can see that the bitrate is about 300kbit/s. Where is the problem? Am I missing any additional setup? Best regards, ----- Mensaje original ---- De: Simon Horne <s.horne(a)packetizer.com> Para: JF NP <jfnp090274(a)yahoo.es>; H323plus <h323plus(a)lists.packetizer.com> Enviado: viernes, 8 de febrero, 2008 3:53:05 Asunto: RE: [h323plus] MyPhone 0.4 Released DIV { MARGIN:0px;} looks like you are right. I have added support for bitrate, fps and also adaptive packet delay to the CVS. Simon -----Original Message----- From: h323plus-bounces(a)lists.packetizer.com [mailto:h323plus-bounces@lists.packetizer.com]On Behalf Of JF NP Sent: Thursday, February 07, 2008 8:44 PM To: H323plus Subject: Re: [h323plus] MyPhone 0.4 Released Hi, I'v been looking at MyPhone2 0.4 source code, and I was wondering how is the videobitrate, fps, etc... managed, because I've seen that all of this parameters are read from the configuration, but they are never used. Best regards, ----- Mensaje original ---- De: Simon Horne <s.horne(a)packetizer.com> Para: H323plus <h323plus(a)lists.packetizer.com> Enviado: viernes, 1 de febrero, 2008 21:57:15 Asunto: [h323plus] MyPhone 0.4 Released Guys I have uploaded MyPhone 0.4 installer to the h323plus website to garnish some feedback on the upcoming 1.20 release on h323plus. Download here http://www.h323plus.org/source/download/MyPhoneSetup04.exe (2.12Mb) Important Features Native NAT traversal with GnuGk : This uses the new GnuGk NAT module now in H323plus. You can send and receive calls behind a NAT when registered to GnuGk on the public internet. The only requirement is that you enable SupportNatedEndpoints in GnuGk. Note this is the GnuGk NAT Method http://www.gnugk.org/nat-traversal.html. It is not the standard H.460.18/19. Built off the latest h323plus CVS. (hopefully the baseline for v1.20) Notes: To run in debug mode start myphone with commandline switches -ttttt (number of t indicate tracelevel) After Install adjust the audio and video codecs to your preferred order. G.711 & H.261 are the default. The installer contains the full myphone2 source code. The exe was built with vs2003. If you wish to build it with a later version of visual studio, although not tested, you will need the $ version as the express version does not seem to support MFC. Hopefully next week if there are not too many problems we will do the snapshot and release v1.20. Simon ¿Con Mascota por primera vez? - Sé un mejor Amigo Entra en Yahoo! Respuestas. ______________________________________________ ¿Con Mascota por primera vez? Sé un mejor Amigo. Entra en Yahoo! Respuestas http://es.answers.yahoo.com/info/welcome

2 3

h323plus v1.20 release
by Simon Horne 10 Feb '08

10 Feb '08

Guys Just a quick note h323plus v1.20 stable release is now available from the h323plus website. http://www.h323plus.org/source/ New Items added to this release from the v1.19.5 development version Native NAT traversal with GnuGk Presence framework File Transfer (TFTP tunnelled through RTP) Also included are snapshots of maintained and updated programs OpenMCU (multipoint conference unit) OpenAM (video answer machine) Simple (simple text based H323plus endpoint) CallGen323 (H.323 Call generator) Look for some more new exciting additions and announcements in the coming weeks. Simon Note: We will be implementing the bool/BOOL change to match the current ptlib SVN in the CVS so please watch at for that.

1 0

Play Multipal Files on OpenAm
by Kirav Patel 08 Feb '08

08 Feb '08

Hello Everyone, I want assistance to add one feature in OpenAm Application. Feature is like - currently it plays one audio message when it receives the call, I want to play two different audio messages during one call. It can be like: Message 1. Hi, Sorry, we are not available at this moment. Message 2. Please leave your message, we will get back to you. Both of these message are stored in two different wav files and I want to play them during one call. I will appreciate the help / guidance. Thanks in Advance, Kirav No virus found in this outgoing message. Checked by AVG. Version: 7.5.516 / Virus Database: 269.19.21/1265 - Release Date: 2/7/2008 11:17 AM

2 1

Re: [h323plus] MyPhone 0.4 Released
by JF NP 07 Feb '08

07 Feb '08

Hi, I'v been looking at MyPhone2 0.4 source code, and I was wondering how is the videobitrate, fps, etc... managed, because I've seen that all of this parameters are read from the configuration, but they are never used. Best regards, ----- Mensaje original ---- De: Simon Horne <s.horne(a)packetizer.com> Para: H323plus <h323plus(a)lists.packetizer.com> Enviado: viernes, 1 de febrero, 2008 21:57:15 Asunto: [h323plus] MyPhone 0.4 Released Guys I have uploaded MyPhone 0.4 installer to the h323plus website to garnish some feedback on the upcoming 1.20 release on h323plus. Download here http://www.h323plus.org/source/download/MyPhoneSetup04.exe (2.12Mb) Important Features Native NAT traversal with GnuGk : This uses the new GnuGk NAT module now in H323plus. You can send and receive calls behind a NAT when registered to GnuGk on the public internet. The only requirement is that you enable SupportNatedEndpoints in GnuGk. Note this is the GnuGk NAT Method http://www.gnugk.org/nat-traversal.html. It is not the standard H.460.18/19. Built off the latest h323plus CVS. (hopefully the baseline for v1.20) Notes: To run in debug mode start myphone with commandline switches -ttttt (number of t indicate tracelevel) After Install adjust the audio and video codecs to your preferred order. G.711 & H.261 are the default. The installer contains the full myphone2 source code. The exe was built with vs2003. If you wish to build it with a later version of visual studio, although not tested, you will need the $ version as the express version does not seem to support MFC. Hopefully next week if there are not too many problems we will do the snapshot and release v1.20. Simon ______________________________________________ ¿Con Mascota por primera vez? Sé un mejor Amigo. Entra en Yahoo! Respuestas http://es.answers.yahoo.com/info/welcome

2 1

MyPhone 0.4 Released
by Simon Horne 01 Feb '08

01 Feb '08

Guys I have uploaded MyPhone 0.4 installer to the h323plus website to garnish some feedback on the upcoming 1.20 release on h323plus. Download here http://www.h323plus.org/source/download/MyPhoneSetup04.exe (2.12Mb) Important Features Native NAT traversal with GnuGk : This uses the new GnuGk NAT module now in H323plus. You can send and receive calls behind a NAT when registered to GnuGk on the public internet. The only requirement is that you enable SupportNatedEndpoints in GnuGk. Note this is the GnuGk NAT Method http://www.gnugk.org/nat-traversal.html. It is not the standard H.460.18/19. Built off the latest h323plus CVS. (hopefully the baseline for v1.20) Notes: To run in debug mode start myphone with commandline switches -ttttt (number of t indicate tracelevel) After Install adjust the audio and video codecs to your preferred order. G.711 & H.261 are the default. The installer contains the full myphone2 source code. The exe was built with vs2003. If you wish to build it with a later version of visual studio, although not tested, you will need the $ version as the express version does not seem to support MFC. Hopefully next week if there are not too many problems we will do the snapshot and release v1.20. Simon

1 0