- h323plus - lists.packetizer.com

problems installing latest CVS of h323 sources
by Tamer Higazi 09 Jun '09

09 Jun '09

Hallo people! I downloaded and successfully compiled your latest sources, but when I run "make install" the installation aborts with: tux h323plus # make install mkdir -p /usr//lib rm -f /usr//lib/libh323_*_r.so* /usr/bin/install -c -m 444 lib/libh323_linux_x86_64_.so.1.21.0 /usr//lib /usr/bin/install: cannot stat `lib/libh323_linux_x86_64_.so.1.21.0': No such file or directory make: *** [install] Error 1 this error message. Could you please give me an advise how to proceed successfully? with kind regards Tamer Higazi

3 2

bug reports for H323plus
by Michael Miller 09 Jun '09

09 Jun '09

Please let me know the appropriate way to report bugs found in the H323plus project. Thanks Michael Miller NCSA "If you're clear in your vision and trust the people in your team with clear objectives, they will invariably do their best to achieve everything desired, and usually deliver everything you could have hoped for and even more." -Paul Debevec

1 0

Re: [h323plus] OpenMCU shutting down unexpectedly
by Michael Miller 08 Jun '09

08 Jun '09

Here's what I get when I use the debug version of OpenMCU located in : h323plus_src/applications/openmcu/obj_linux_x86_d You can see that I was able to connect a client and then the second client crashed OpenMCU. The first unit was a polycom vsx-8000 the second was a polycom vs-4000. I'm guessing the error points to here: 00b61000-00ba8000 rw-p 0077d000 fd:00 450315 /root/h323plus_src/h323plus/lib/libh323_linux_x86__d.so.1.20-beta5 But I'm not sure what to do about it. Any suggestions are greatly appreciated. Michael (gdb) set args -c -n -d --video --defaultroom ncsa1 (gdb) run Starting program: /root/h323plus_src/applications/openmcu/obj_linux_x86_d/openmcu -c -n -d --video --defaultroom ncsa1 [Thread debugging using libthread_db enabled] [New Thread 0xb7fea740 (LWP 12035)] error loading /usr/local/lib/pwlib/avcodec - /usr/local/lib/pwlib/avcodec: cannot open shared object file: No such file or directory error loading /usr/local/lib/pwlib/libavcodec.so - /usr/local/lib/pwlib/libavcodec.so: cannot open shared object file: No such file or directory All output for OpenMCU is to console. 2009/06/07 23:53:11.441 OpenMCU Message Starting service process "OpenMCU" v2.2.4 Detaching after fork from child process 12044. Daemon started with pid 12044 2009/06/07 23:53:11.451 OpenMCU Debug3 PWLib File handle high water mark set: 8 Thread unblock pipe 2009/06/07 23:53:11.453 OpenMCU Debug3 PTLib Thread high water mark set: 2 2009/06/07 23:53:11.458 OpenMCU Debug3 PWLib File handle high water mark set: 10 Thread unblock pipe 2009/06/07 23:53:11.459 OpenMCU Debug3 PTLib Thread high water mark set: 3 2009/06/07 23:53:11.464 OpenMCU Debug3 2009/06/07 23:53:11.468 OpenMCU Debug3 PWLib File handle high water mark set: 12 Thread unblock pipe 2009/06/07 23:53:11.471 OpenMCU Debug3 PTLib Thread high water mark set: 4 2009/06/07 23:53:11.472 H323 Cleaner:0xb7f67b90 Debug3 H323 Started cleaner thread 2009/06/07 23:53:11.474 OpenMCU Debug3 H323 Created endpoint. 2009/06/07 23:53:11.476 OpenMCU Debug3 PWLib File handle high water mark set: 14 Thread unblock pipe 2009/06/07 23:53:11.478 OpenMCU Debug3 PTLib Thread high water mark set: 5 2009/06/07 23:53:11.479 PXConfigWr...0xb7f26b90 Debug3 PTLib Config file cache write back thread started. 2009/06/07 23:53:11.480 OpenMCU Debug3 PTLib Created PXConfig 0x8221048 2009/06/07 23:53:11.481 OpenMCU Debug3 PTLib Reading config file: /root/.pwlib_config/openmcu.ini Program exited normally. Missing separate debuginfos, use: debuginfo-install e2fsprogs-libs-1.41.4-5.fc10.i386 glibc-2.9-3.i686 keyutils-libs-1.2-3.fc9.i386 krb5-libs-1.6.3-18.fc10.i386 libgcc-4.3.2-7.i386 libselinux-2.0.78-1.fc10.i386 libstdc++-4.3.2-7.i386 openssl-0.9.8g-13.fc10.i686 zlib-1.2.3-18.fc9.i386 (gdb) 2009/06/07 23:53:11.484 OpenMCU Debug3 PWLib File handle high water mark set: 15 PTextFile 2009/06/07 23:53:11.489 OpenMCU Debug3 2009/06/07 23:53:11.701 OpenMCU Info Registered with Gatekeeper: 141.142.222.234 2009/06/07 23:53:11.718 OpenMCU Info Opened master socket for HTTP: 1420 2009/06/07 23:53:11.724 OpenMCU Info Service OpenMCU Started Adaptive Packet Delay = 0 - 0 Annex D = 0 - 0 CIF MPI = 1 - 1 CIF16 MPI = 0 - 0 CIF4 MPI = 0 - 0 Dynamic Video Quality = 0 - 0 Encoding Quality = 15 - 15 Frame Height = 288 - 288 Frame Time = 3003 - 3003 Frame Width = 352 - 352 h323_stillImageTransmission = 1 - 1 h323_temporalSpatialTradeOffCapability = 0 - 0 Max Bit Rate = 621700 - 621700 QCIF MPI = 0 - 0 SQCIF MPI = 0 - 0 Target Bit Rate = 64000 - 64000 Adaptive Packet Delay = 0 - 0 Annex D = 0 - 0 CIF MPI = 1 - 1 CIF16 MPI = 0 - 0 CIF4 MPI = 0 - 0 Dynamic Video Quality = 0 - 0 Encoding Quality = 15 - 15 Frame Height = 288 - 288 Frame Time = 3003 - 3003 Frame Width = 352 - 352 h323_stillImageTransmission = 1 - 1 h323_temporalSpatialTradeOffCapability = 0 - 0 Max Bit Rate = 621700 - 621700 QCIF MPI = 0 - 0 SQCIF MPI = 0 - 0 Target Bit Rate = 64000 - 64000 *** glibc detected *** /root/h323plus_src/applications/openmcu/obj_linux_x86_d/openmcu: malloc(): memory corruption (fast): 0xb7d83780 *** ======= Backtrace: ========= /lib/libc.so.6[0x2553a4] /lib/libc.so.6[0x258356] /lib/libc.so.6(__libc_malloc+0x95)[0x259765] /usr/lib/libstdc++.so.6(_Znwj+0x27)[0x3b40297] /usr/local/lib/libpt_d.so.2.6.2(_ZN13PStringStreamC1Ev+0x38)[0xe8044a] /usr/local/lib/libpt_d.so.2.6.2(_ZN6PTrace5BeginEjPKci+0xdd)[0xe656c5] /usr/local/lib/libh323_linux_x86__d.so.1.20-beta5(_ZN16RTP_JitterBuffer8ReadDataEjR13RTP_DataFrame+0x9f9)[0xb1e997] /usr/local/lib/libh323_linux_x86__d.so.1.20-beta5(_ZN11RTP_Session16ReadBufferedDataEjR13RTP_DataFrame+0x36)[0xa176ec] /usr/local/lib/libh323_linux_x86__d.so.1.20-beta5(_ZN15H323_RTPChannel7ReceiveEv+0x833)[0xa0774f] /usr/local/lib/libh323_linux_x86__d.so.1.20-beta5(_ZN24H323LogicalChannelThread4MainEv+0xa5)[0xa04e7f] /usr/local/lib/libpt_d.so.2.6.2(_ZN7PThread14PX_ThreadStartEPv+0x154)[0xe2c226] /lib/libpthread.so.0[0x39451f] /lib/libc.so.6(clone+0x5e)[0x2ca04e] ======= Memory map: ======== 00110000-00123000 r-xp 00000000 fd:00 51594 /lib/libresolv-2.9.so 00123000-00124000 r--p 00012000 fd:00 51594 /lib/libresolv-2.9.so 00124000-00125000 rw-p 00013000 fd:00 51594 /lib/libresolv-2.9.so 00125000-00127000 rw-p 00125000 00:00 0 00127000-00129000 r-xp 00000000 fd:00 51606 /lib/libcom_err.so.2.1 00129000-0012a000 rw-p 00001000 fd:00 51606 /lib/libcom_err.so.2.1 0012a000-00133000 r-xp 00000000 fd:00 26804 /usr/local/lib/pwlib/codecs/audio/lpc10_audio_pwplugin.so 00133000-00134000 rw-p 00008000 fd:00 26804 /usr/local/lib/pwlib/codecs/audio/lpc10_audio_pwplugin.so 00134000-00188000 r-xp 00000000 fd:00 26807 /usr/local/lib/pwlib/codecs/audio/gsmamrcodec_pwplugin.so 00188000-0018f000 rw-p 00054000 fd:00 26807 /usr/local/lib/pwlib/codecs/audio/gsmamrcodec_pwplugin.so 0018f000-00190000 r-xp 00000000 fd:00 26806 /usr/local/lib/pwlib/codecs/audio/ima_adpcm_audio_pwplugin.so 00190000-00191000 rw-p 00000000 fd:00 26806 /usr/local/lib/pwlib/codecs/audio/ima_adpcm_audio_pwplugin.so 00191000-00194000 r-xp 00000000 fd:00 26805 /usr/local/lib/pwlib/codecs/audio/g726_audio_pwplugin.so 00194000-00195000 rw-p 00003000 fd:00 26805 /usr/local/lib/pwlib/codecs/audio/g726_audio_pwplugin.so 00195000-001a2000 r-xp 00000000 fd:00 26803 /usr/local/lib/pwlib/codecs/audio/ilbc_audio_pwplugin.so 001a2000-001a5000 rw-p 0000c000 fd:00 26803 /usr/local/lib/pwlib/codecs/audio/ilbc_audio_pwplugin.so 001ab000-001b8000 r-xp 00000000 fd:00 51599 /lib/libgcc_s-4.3.2-20081105.so.1 001b8000-001b9000 rw-p 0000c000 fd:00 51599 /lib/libgcc_s-4.3.2-20081105.so.1 001bb000-001bd000 r-xp 00000000 fd:00 51605 /lib/libkeyutils-1.2.so 001bd000-001be000 rw-p 00001000 fd:00 51605 /lib/libkeyutils-1.2.so 001c1000-001e1000 r-xp 00000000 fd:00 51582 /lib/ld-2.9.so 001e2000-001e3000 r--p 00020000 fd:00 51582 /lib/ld-2.9.so 001e3000-001e4000 rw-p 00021000 fd:00 51582 /lib/ld-2.9.so 001e6000-00354000 r-xp 00000000 fd:00 51583 /lib/libc-2.9.so 00354000-00356000 r--p 0016e000 fd:00 51583 /lib/libc-2.9.so 00356000-00357000 rw-p 00170000 fd:00 51583 /lib/libc-2.9.so 00357000-0035a000 rw-p 00357000 00:00 0 0035c000-00383000 r-xp 00000000 fd:00 51596 /lib/libm-2.9.so 00383000-00384000 r--p 00026000 fd:00 51596 /lib/libm-2.9.so 00384000-00385000 rw-p 00027000 fd:00 51596 /lib/libm-2.9.so 00387000-0038a000 r-xp 00000000 fd:00 51589 /lib/libdl-2.9.so 0038a000-0038b000 r--p 00002000 fd:00 51589 /lib/libdl-2.9.so 0038b000-0038c000 rw-p 00003000 fd:00 51589 /lib/libdl-2.9.so 0038e000-003a4000 r-xp 00000000 fd:00 51584 /lib/libpthread-2.9.so 003a4000-003a5000 r--p 00015000 fd:00 51584 /lib/libpthread-2.9.so 003a5000-003a6000 rw-p 00016000 fd:00 51584 /lib/libpthread-2.9.so 003a6000-003a8000 rw-p 003a6000 00:00 0 003aa000-003bd000 r-xp 00000000 fd:00 49286 /lib/libz.so.1.2.3 003bd000-003be000 rw-p 00012000 fd:00 49286 /lib/libz.so.1.2.3 003c0000-003db000 r-xp 00000000 fd:00 51591 /lib/libselinux.so.1 003db000-003dc000 r--p 0001a000 fd:00 51591 /lib/libselinux.so.1 003dc000-003dd000 rw-p 0001b000 fd:00 51591 /lib/libselinux.so.1 003e3000-00b61000 r-xp 00000000 fd:00 450315 /root/h323plus_src/h323plus/lib/libh323_linux_x86__d.so.1.20-beta5 00b61000-00ba8000 rw-p 0077d000 fd:00 450315 /root/h323plus_src/h323plus/lib/libh323_linux_x86__d.so.1.20-beta5 00ba8000-00baa000 rw-p 00ba8000 00:00 0 00baa000-00bcb000 r-xp 00000000 fd:00 26802 /usr/local/lib/pwlib/codecs/audio/speex_audio_pwplugin.so 00bcb000-00bcd000 rw-p 00020000 fd:00 26802 /usr/local/lib/pwlib/codecs/audio/speex_audio_pwplugin.so 00bcd000-00bd6000 r-xp 00000000 fd:00 26801 /usr/local/lib/pwlib/codecs/audio/gsm0610_audio_pwplugin.so 00bd6000-00bd7000 rw-p 00008000 fd:00 26801 /usr/local/lib/pwlib/codecs/audio/gsm0610_audio_pwplugin.so 00bd7000-00be2000 r-xp 00000000 fd:00 49242 /lib/libnss_files-2.9.so 00be2000-00be3000 r--p 0000a000 fd:00 49242 /lib/libnss_files-2.9.so 00be3000-00be4000 rw-p 0000b000 fd:00 49242 /lib/libnss_files-2.9.so 00bfb000-00e98000 r-xp 00000000 fd:00 435104 /root/ptlib-2.6.2/lib_linux_x86/libpt_d.so.2.6.2 00e98000-00ec0000 rw-p 0029d000 fd:00 435104 /root/ptlib-2.6.2/lib_linux_x86/libpt_d.so.2.6.2 00ec0000-00ec3000 rw-p 00ec0000 00:00 0 00ec3000-00efe000 r-xp 00000000 fd:00 199303 /usr/local/lib/pwlib/codecs/video/h261-vic_video_pwplugin.so 00efe000-00f0c000 rw-p 0003b000 fd:00 199303 /usr/local/lib/pwlib/codecs/video/h261-vic_video_pwplugin.so 00f2b000-00f31000 r-xp 00000000 fd:00 199304 /usr/local/lib/pwlib/codecs/video/h263-ffmpeg_video_pwplugin.so 00f31000-00f32000 rw-p 00006000 fd:00 199304 /usr/local/lib/pwlib/codecs/video/h263-ffmpeg_video_pwplugin.so 00f71000-00f72000 r-xp 00f71000 00:00 0 [vdso] 037d9000-037fd000 r-xp 00000000 fd:00 41953 /usr/lib/libk5crypto.so.3.1 037fd000-037fe000 rw-p 00024000 fd:00 41953 /usr/lib/libk5crypto.so.3.1 03800000-03937000 r-xp 00000000 "If you're clear in your vision and trust the people in your team with clear objectives, they will invariably do their best to achieve everything desired, and usually deliver everything you could have hoped for and even more." -Paul Debevec ----- Original Message ----- From: "Jan Willamowius" <jan(a)willamowius.de> To: h323plus(a)lists.packetizer.com Sent: Saturday, June 6, 2009 2:34:37 PM GMT -06:00 US/Canada Central Subject: Re: [h323plus] OpenMCU shutting down unexpectedly Hi Michael, I think "make install" always installs the optimized executable. I would enable core dumps ("ulimit -c unlimited") and then execute the debug version of openmcu right out of the compile directory (./obj_linux_x86_64_d/openmcu ...."). When you then crash openmcu, you can start gdb with "gdb ./obj_linux_x86_64_d/openmcu core" and execute a "bt" command to see where it crashed. Regards, Jan Michael Miller wrote: > Jan, > > I'm not sure I did this right. I went to the ptlib-2.6.2 directory and executed: > make debug > make install > > That all went fine. Then I moved to the openmcu directory and executed: > make debug > make install > > That all appears to work fine. But when I go to trace it I get: > > ~]# gdb /bin/openmcu > GNU gdb Fedora (6.8-29.fc10) > Copyright (C) 2008 Free Software Foundation, Inc. > License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> > This is free software: you are free to change and redistribute it. > There is NO WARRANTY, to the extent permitted by law. Type "show copying" > and "show warranty" for details. > This GDB was configured as "i386-redhat-linux-gnu"... > (no debugging symbols found) > (gdb) set args -c -n -d --video --defaultroom ncsa1 > (gdb) run > Starting program: /bin/openmcu -c -n -d --video --defaultroom ncsa1 > (no debugging symbols found) > (no debugging symbols found) > (no debugging symbols found) > (no debugging symbols found) > (no debugging symbols found) > [Thread debugging using libthread_db enabled] > (no debugging symbols found) > (no debugging symbols found) > (no debugging symbols found) > (no debugging symbols found) > (no debugging symbols found) > (no debugging symbols found) > (no debugging symbols found) > (no debugging symbols found) > (no debugging symbols found) > (no debugging symbols found) > (no debugging symbols found) > (no debugging symbols found) > (no debugging symbols found) > (no debugging symbols found) > (no debugging symbols found) > (no debugging symbols found) > [New Thread 0xb7fea740 (LWP 6526)] > error loading /usr/local/lib/pwlib/avcodec - /usr/local/lib/pwlib/avcodec: cannot open shared object file: No such file or directory > error loading /usr/local/lib/pwlib/libavcodec.so - /usr/local/lib/pwlib/libavcodec.so: cannot open shared object file: No such file or directory > All output for OpenMCU is to console. > 2009/06/02 04:39:14.431 OpenMCU Message Starting service process "OpenMCU" v2.2.4 > Detaching after fork from child process 6535. > Daemon started with pid 6535 > 2009/06/02 04:39:14.456 OpenMCU Debug3 > 2009/06/02 04:39:14.465 OpenMCU Debug3 PWLib File handle high water mark set: 8 Thread unblock pipe > 2009/06/02 04:39:14.466 OpenMCU Debug3 PTLib Thread high water mark set: 2 > > Program exited normally. > Missing separate debuginfos, use: debuginfo-install e2fsprogs-libs-1.41.4-5.fc10.i386 glibc-2.9-3.i686 keyutils-libs-1.2-3.fc9.i386 krb5-libs-1.6.3-18.fc10.i386 libgcc-4.3.2-7.i386 libselinux-2.0.78-1.fc10.i386 libstdc++-4.3.2-7.i386 openssl-0.9.8g-13.fc10.i686 zlib-1.2.3-18.fc9.i386 > (gdb) 2009/06/02 04:39:14.470 OpenMCU Debug3 PWLib File handle high water mark set: 10 Thread unblock pipe > 2009/06/02 04:39:14.470 OpenMCU Debug3 PTLib Thread high water mark set: 3 > 2009/06/02 04:39:14.475 OpenMCU Debug3 PWLib File handle high water mark set: 12 Thread unblock pipe > 2009/06/02 04:39:14.476 OpenMCU Debug3 PTLib Thread high water mark set: 4 > 2009/06/02 04:39:14.477 OpenMCU Debug3 H323 Created endpoint. > 2009/06/02 04:39:14.479 OpenMCU Debug3 PWLib File handle high water mark set: 14 Thread unblock pipe > 2009/06/02 04:39:14.480 H323 Cleaner:0xb7f67b90 Debug3 H323 Started cleaner thread > 2009/06/02 04:39:14.480 OpenMCU Debug3 PTLib Thread high water mark set: 5 > 2009/06/02 04:39:14.481 PXConfigWr...0xb7dffb90 Debug3 PTLib Config file cache write back thread started. > 2009/06/02 04:39:14.482 OpenMCU Debug3 PTLib Created PXConfig 0x81fdd68 > 2009/06/02 04:39:14.482 OpenMCU Debug3 PTLib Reading config file: /root/.pwlib_config/openmcu.ini > 2009/06/02 04:39:14.483 OpenMCU Debug3 PWLib File handle high water mark set: 15 PTextFile > 2009/06/02 04:39:14.494 OpenMCU Debug3 > 2009/06/02 04:39:14.793 OpenMCU Info Registered with Gatekeeper: 141.142.222.234 > 2009/06/02 04:39:14.801 OpenMCU Info Opened master socket for HTTP: 1420 > 2009/06/02 04:39:14.802 OpenMCU Info Service OpenMCU Started > > > I'm not sure what the "(no debugging symbols found)" is referring to... > > Any suggestions are greatly appreciated. > > Michael > > > "If you're clear in your vision and trust the people in your team with clear objectives, they will invariably do their best to achieve everything desired, and usually deliver everything you could have hoped for and even more." -Paul Debevec > > ----- Original Message ----- > From: "Jan Willamowius" <jan(a)willamowius.de> > To: h323plus(a)lists.packetizer.com > Sent: Tuesday, June 2, 2009 12:55:28 PM GMT -06:00 US/Canada Central > Subject: Re: [h323plus] OpenMCU shutting down unexpectedly > > Hi, > > the compile will work if you compile PTLib directly with 'make debug' > and don't rely on the OpenMCU makefile to start the compilation of > PTLib. > > Regards, > Jan > > > Michael Miller wrote: > > Hello, > > > > I have OpenMCU compiled/installed from the latest cvs. When I get a third client connected, OpenMCU shuts down unexpectedly. It appears to get a shutdown signal from somewhere. I have attached an strace. Let me know if more info is needed. > > > > Also, in pursuing more info about this, I tried compiling OpenMCU with the debug option and got: > > > > ]# make debug > > make DEBUG=1 default_target > > make[1]: Entering directory `/root/openmcu-v2_2_4-src/applications/openmcu' > > g++ -I/root/pwlib/include -DPTRACING=1 -D_REENTRANT -I/usr/kerberos/include -fno-exceptions -Wall -g3 -ggdb -O0 -D_DEBUG -DPTRACING -I/root/h323plus/include -felide-constructors -Wreorder -c main.cxx -o obj_linux_x86_d/main.o > > g++ -I/root/pwlib/include -DPTRACING=1 -D_REENTRANT -I/usr/kerberos/include -fno-exceptions -Wall -g3 -ggdb -O0 -D_DEBUG -DPTRACING -I/root/h323plus/include -felide-constructors -Wreorder -c video.cxx -o obj_linux_x86_d/video.o > > video.cxx: In member function ‘PBoolean MCUSimpleVideoMixer::ReadSrcFrame(VideoFrameStoreList&, void*, int, int, PINDEX&)’: > > video.cxx:953: warning: comparison between signed and unsigned integer expressions > > video.cxx:953: warning: comparison between signed and unsigned integer expressions > > g++ -I/root/pwlib/include -DPTRACING=1 -D_REENTRANT -I/usr/kerberos/include -fno-exceptions -Wall -g3 -ggdb -O0 -D_DEBUG -DPTRACING -I/root/h323plus/include -felide-constructors -Wreorder -c conference.cxx -o obj_linux_x86_d/conference.o > > g++ -I/root/pwlib/include -DPTRACING=1 -D_REENTRANT -I/usr/kerberos/include -fno-exceptions -Wall -g3 -ggdb -O0 -D_DEBUG -DPTRACING -I/root/h323plus/include -felide-constructors -Wreorder -c filemembers.cxx -o obj_linux_x86_d/filemembers.o > > g++ -I/root/pwlib/include -DPTRACING=1 -D_REENTRANT -I/usr/kerberos/include -fno-exceptions -Wall -g3 -ggdb -O0 -D_DEBUG -DPTRACING -I/root/h323plus/include -felide-constructors -Wreorder -c custom.cxx -o obj_linux_x86_d/custom.o > > g++ -I/root/pwlib/include -DPTRACING=1 -D_REENTRANT -I/usr/kerberos/include -fno-exceptions -Wall -g3 -ggdb -O0 -D_DEBUG -DPTRACING -I/root/h323plus/include -felide-constructors -Wreorder -c h323.cxx -o obj_linux_x86_d/h323.o > > h323.cxx: In member function ‘virtual PBoolean OpenMCUH323Connection::OnIncomingAudio(const void*, PINDEX)’: > > h323.cxx:926: warning: comparison is always false due to limited range of data type > > g++ -I/root/pwlib/include -DPTRACING=1 -D_REENTRANT -I/usr/kerberos/include -fno-exceptions -Wall -g3 -ggdb -O0 -D_DEBUG -DPTRACING -I/root/h323plus/include -felide-constructors -Wreorder -c mcu.cxx -o obj_linux_x86_d/mcu.o > > make -C /root/pwlib/src/ptlib/unix debug > > make[2]: Entering directory `/root/ptlib-2.6.2/src/ptlib/unix' > > make[2]: *** No rule to make target `debug'. Stop. > > make[2]: Leaving directory `/root/ptlib-2.6.2/src/ptlib/unix' > > make[1]: *** [/root/pwlib/lib_linux_x86/libpt_d.so] Error 2 > > make[1]: Leaving directory `/root/openmcu-v2_2_4-src/applications/openmcu' > > make: *** [debug] Error 2 > > > > I have set: > > PTLIBDIR=/root/pwlib > > PTLIBPLUGINDIR=/usr/local/lib/pwlib/ > > > > Any other suggestions for making OpenMCU debuggable? > > > > thanks > > Michael > > "If you're clear in your vision and trust the people in your team with clear objectives, they will invariably do their best to achieve everything desired, and usually deliver everything you could have hoped for and even more." -Paul Debevec > > > -- > Jan Willamowius, jan(a)willamowius.de, http://www.willamowius.de/ > > -- Jan Willamowius, jan(a)willamowius.de, http://www.willamowius.de/

2 1

Re: [h323plus] OpenMCU shutting down unexpectedly
by Michael Miller 06 Jun '09

06 Jun '09

Jan, I'm not sure I did this right. I went to the ptlib-2.6.2 directory and executed: make debug make install That all went fine. Then I moved to the openmcu directory and executed: make debug make install That all appears to work fine. But when I go to trace it I get: ~]# gdb /bin/openmcu GNU gdb Fedora (6.8-29.fc10) Copyright (C) 2008 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "i386-redhat-linux-gnu"... (no debugging symbols found) (gdb) set args -c -n -d --video --defaultroom ncsa1 (gdb) run Starting program: /bin/openmcu -c -n -d --video --defaultroom ncsa1 (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) [Thread debugging using libthread_db enabled] (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) [New Thread 0xb7fea740 (LWP 6526)] error loading /usr/local/lib/pwlib/avcodec - /usr/local/lib/pwlib/avcodec: cannot open shared object file: No such file or directory error loading /usr/local/lib/pwlib/libavcodec.so - /usr/local/lib/pwlib/libavcodec.so: cannot open shared object file: No such file or directory All output for OpenMCU is to console. 2009/06/02 04:39:14.431 OpenMCU Message Starting service process "OpenMCU" v2.2.4 Detaching after fork from child process 6535. Daemon started with pid 6535 2009/06/02 04:39:14.456 OpenMCU Debug3 2009/06/02 04:39:14.465 OpenMCU Debug3 PWLib File handle high water mark set: 8 Thread unblock pipe 2009/06/02 04:39:14.466 OpenMCU Debug3 PTLib Thread high water mark set: 2 Program exited normally. Missing separate debuginfos, use: debuginfo-install e2fsprogs-libs-1.41.4-5.fc10.i386 glibc-2.9-3.i686 keyutils-libs-1.2-3.fc9.i386 krb5-libs-1.6.3-18.fc10.i386 libgcc-4.3.2-7.i386 libselinux-2.0.78-1.fc10.i386 libstdc++-4.3.2-7.i386 openssl-0.9.8g-13.fc10.i686 zlib-1.2.3-18.fc9.i386 (gdb) 2009/06/02 04:39:14.470 OpenMCU Debug3 PWLib File handle high water mark set: 10 Thread unblock pipe 2009/06/02 04:39:14.470 OpenMCU Debug3 PTLib Thread high water mark set: 3 2009/06/02 04:39:14.475 OpenMCU Debug3 PWLib File handle high water mark set: 12 Thread unblock pipe 2009/06/02 04:39:14.476 OpenMCU Debug3 PTLib Thread high water mark set: 4 2009/06/02 04:39:14.477 OpenMCU Debug3 H323 Created endpoint. 2009/06/02 04:39:14.479 OpenMCU Debug3 PWLib File handle high water mark set: 14 Thread unblock pipe 2009/06/02 04:39:14.480 H323 Cleaner:0xb7f67b90 Debug3 H323 Started cleaner thread 2009/06/02 04:39:14.480 OpenMCU Debug3 PTLib Thread high water mark set: 5 2009/06/02 04:39:14.481 PXConfigWr...0xb7dffb90 Debug3 PTLib Config file cache write back thread started. 2009/06/02 04:39:14.482 OpenMCU Debug3 PTLib Created PXConfig 0x81fdd68 2009/06/02 04:39:14.482 OpenMCU Debug3 PTLib Reading config file: /root/.pwlib_config/openmcu.ini 2009/06/02 04:39:14.483 OpenMCU Debug3 PWLib File handle high water mark set: 15 PTextFile 2009/06/02 04:39:14.494 OpenMCU Debug3 2009/06/02 04:39:14.793 OpenMCU Info Registered with Gatekeeper: 141.142.222.234 2009/06/02 04:39:14.801 OpenMCU Info Opened master socket for HTTP: 1420 2009/06/02 04:39:14.802 OpenMCU Info Service OpenMCU Started I'm not sure what the "(no debugging symbols found)" is referring to... Any suggestions are greatly appreciated. Michael "If you're clear in your vision and trust the people in your team with clear objectives, they will invariably do their best to achieve everything desired, and usually deliver everything you could have hoped for and even more." -Paul Debevec ----- Original Message ----- From: "Jan Willamowius" <jan(a)willamowius.de> To: h323plus(a)lists.packetizer.com Sent: Tuesday, June 2, 2009 12:55:28 PM GMT -06:00 US/Canada Central Subject: Re: [h323plus] OpenMCU shutting down unexpectedly Hi, the compile will work if you compile PTLib directly with 'make debug' and don't rely on the OpenMCU makefile to start the compilation of PTLib. Regards, Jan Michael Miller wrote: > Hello, > > I have OpenMCU compiled/installed from the latest cvs. When I get a third client connected, OpenMCU shuts down unexpectedly. It appears to get a shutdown signal from somewhere. I have attached an strace. Let me know if more info is needed. > > Also, in pursuing more info about this, I tried compiling OpenMCU with the debug option and got: > > ]# make debug > make DEBUG=1 default_target > make[1]: Entering directory `/root/openmcu-v2_2_4-src/applications/openmcu' > g++ -I/root/pwlib/include -DPTRACING=1 -D_REENTRANT -I/usr/kerberos/include -fno-exceptions -Wall -g3 -ggdb -O0 -D_DEBUG -DPTRACING -I/root/h323plus/include -felide-constructors -Wreorder -c main.cxx -o obj_linux_x86_d/main.o > g++ -I/root/pwlib/include -DPTRACING=1 -D_REENTRANT -I/usr/kerberos/include -fno-exceptions -Wall -g3 -ggdb -O0 -D_DEBUG -DPTRACING -I/root/h323plus/include -felide-constructors -Wreorder -c video.cxx -o obj_linux_x86_d/video.o > video.cxx: In member function ‘PBoolean MCUSimpleVideoMixer::ReadSrcFrame(VideoFrameStoreList&, void*, int, int, PINDEX&)’: > video.cxx:953: warning: comparison between signed and unsigned integer expressions > video.cxx:953: warning: comparison between signed and unsigned integer expressions > g++ -I/root/pwlib/include -DPTRACING=1 -D_REENTRANT -I/usr/kerberos/include -fno-exceptions -Wall -g3 -ggdb -O0 -D_DEBUG -DPTRACING -I/root/h323plus/include -felide-constructors -Wreorder -c conference.cxx -o obj_linux_x86_d/conference.o > g++ -I/root/pwlib/include -DPTRACING=1 -D_REENTRANT -I/usr/kerberos/include -fno-exceptions -Wall -g3 -ggdb -O0 -D_DEBUG -DPTRACING -I/root/h323plus/include -felide-constructors -Wreorder -c filemembers.cxx -o obj_linux_x86_d/filemembers.o > g++ -I/root/pwlib/include -DPTRACING=1 -D_REENTRANT -I/usr/kerberos/include -fno-exceptions -Wall -g3 -ggdb -O0 -D_DEBUG -DPTRACING -I/root/h323plus/include -felide-constructors -Wreorder -c custom.cxx -o obj_linux_x86_d/custom.o > g++ -I/root/pwlib/include -DPTRACING=1 -D_REENTRANT -I/usr/kerberos/include -fno-exceptions -Wall -g3 -ggdb -O0 -D_DEBUG -DPTRACING -I/root/h323plus/include -felide-constructors -Wreorder -c h323.cxx -o obj_linux_x86_d/h323.o > h323.cxx: In member function ‘virtual PBoolean OpenMCUH323Connection::OnIncomingAudio(const void*, PINDEX)’: > h323.cxx:926: warning: comparison is always false due to limited range of data type > g++ -I/root/pwlib/include -DPTRACING=1 -D_REENTRANT -I/usr/kerberos/include -fno-exceptions -Wall -g3 -ggdb -O0 -D_DEBUG -DPTRACING -I/root/h323plus/include -felide-constructors -Wreorder -c mcu.cxx -o obj_linux_x86_d/mcu.o > make -C /root/pwlib/src/ptlib/unix debug > make[2]: Entering directory `/root/ptlib-2.6.2/src/ptlib/unix' > make[2]: *** No rule to make target `debug'. Stop. > make[2]: Leaving directory `/root/ptlib-2.6.2/src/ptlib/unix' > make[1]: *** [/root/pwlib/lib_linux_x86/libpt_d.so] Error 2 > make[1]: Leaving directory `/root/openmcu-v2_2_4-src/applications/openmcu' > make: *** [debug] Error 2 > > I have set: > PTLIBDIR=/root/pwlib > PTLIBPLUGINDIR=/usr/local/lib/pwlib/ > > Any other suggestions for making OpenMCU debuggable? > > thanks > Michael > "If you're clear in your vision and trust the people in your team with clear objectives, they will invariably do their best to achieve everything desired, and usually deliver everything you could have hoped for and even more." -Paul Debevec -- Jan Willamowius, jan(a)willamowius.de, http://www.willamowius.de/

2 1

opal and h323plus library
by andrew wang 06 Jun '09

06 Jun '09

hello everybody, I want to know the difference between opal and h323plus in client side. The two libs are all based on ptlib, and I think the two libs have the same function---h323 stack. I have made one window application which is above opal library. And I want to use h323plus lib, and don't change the application interface. Is there any difference between the application interfaces of opal and h323plus. Thanks. The question is very urgent to me. I'll appreciate your answers. And Please give me some valuable advice. Thanks. Best regards andrew

2 1

OpenMCU - H263 and Connection Problems.
by Daniel Rammelt 02 Jun '09

02 Jun '09

Hi all, I am currently trying to get OpenMCU up and running on Debian 5 but am encountering some issues. Firstly, None of the clients I have tried (Mirial, Evo, Ekiga, Lifesize HD unit, etc) will connect at anything other than H261. I have OPENH323DIR=/usr/local/lib/openh323/ PTLIBPLUGINDIR=/usr/local/lib/opal-3.6.1/ Is there someway to see why the H263 codec is not loading? I have build it in Opal. Do I need to specify it somewhere? Second problem is that, when more than 2 clients join the conference everyone but the last person to join is disconnected from the conference. All clients are on the same network with no firewalls etc. I have tried looking into the trace.txt but I do not really know what to look for and there is alot of stuff in it. -- =========================================== Daniel Rammelt Advanced Video Collaboration Centre (AVCC) http://avcc.karen.net.nz

2 4

OpenMCU shutting down unexpectedly
by Michael Miller 02 Jun '09

02 Jun '09

Hello, I have OpenMCU compiled/installed from the latest cvs. When I get a third client connected, OpenMCU shuts down unexpectedly. It appears to get a shutdown signal from somewhere. I have attached an strace. Let me know if more info is needed. Also, in pursuing more info about this, I tried compiling OpenMCU with the debug option and got: ]# make debug make DEBUG=1 default_target make[1]: Entering directory `/root/openmcu-v2_2_4-src/applications/openmcu' g++ -I/root/pwlib/include -DPTRACING=1 -D_REENTRANT -I/usr/kerberos/include -fno-exceptions -Wall -g3 -ggdb -O0 -D_DEBUG -DPTRACING -I/root/h323plus/include -felide-constructors -Wreorder -c main.cxx -o obj_linux_x86_d/main.o g++ -I/root/pwlib/include -DPTRACING=1 -D_REENTRANT -I/usr/kerberos/include -fno-exceptions -Wall -g3 -ggdb -O0 -D_DEBUG -DPTRACING -I/root/h323plus/include -felide-constructors -Wreorder -c video.cxx -o obj_linux_x86_d/video.o video.cxx: In member function ‘PBoolean MCUSimpleVideoMixer::ReadSrcFrame(VideoFrameStoreList&, void*, int, int, PINDEX&)’: video.cxx:953: warning: comparison between signed and unsigned integer expressions video.cxx:953: warning: comparison between signed and unsigned integer expressions g++ -I/root/pwlib/include -DPTRACING=1 -D_REENTRANT -I/usr/kerberos/include -fno-exceptions -Wall -g3 -ggdb -O0 -D_DEBUG -DPTRACING -I/root/h323plus/include -felide-constructors -Wreorder -c conference.cxx -o obj_linux_x86_d/conference.o g++ -I/root/pwlib/include -DPTRACING=1 -D_REENTRANT -I/usr/kerberos/include -fno-exceptions -Wall -g3 -ggdb -O0 -D_DEBUG -DPTRACING -I/root/h323plus/include -felide-constructors -Wreorder -c filemembers.cxx -o obj_linux_x86_d/filemembers.o g++ -I/root/pwlib/include -DPTRACING=1 -D_REENTRANT -I/usr/kerberos/include -fno-exceptions -Wall -g3 -ggdb -O0 -D_DEBUG -DPTRACING -I/root/h323plus/include -felide-constructors -Wreorder -c custom.cxx -o obj_linux_x86_d/custom.o g++ -I/root/pwlib/include -DPTRACING=1 -D_REENTRANT -I/usr/kerberos/include -fno-exceptions -Wall -g3 -ggdb -O0 -D_DEBUG -DPTRACING -I/root/h323plus/include -felide-constructors -Wreorder -c h323.cxx -o obj_linux_x86_d/h323.o h323.cxx: In member function ‘virtual PBoolean OpenMCUH323Connection::OnIncomingAudio(const void*, PINDEX)’: h323.cxx:926: warning: comparison is always false due to limited range of data type g++ -I/root/pwlib/include -DPTRACING=1 -D_REENTRANT -I/usr/kerberos/include -fno-exceptions -Wall -g3 -ggdb -O0 -D_DEBUG -DPTRACING -I/root/h323plus/include -felide-constructors -Wreorder -c mcu.cxx -o obj_linux_x86_d/mcu.o make -C /root/pwlib/src/ptlib/unix debug make[2]: Entering directory `/root/ptlib-2.6.2/src/ptlib/unix' make[2]: *** No rule to make target `debug'. Stop. make[2]: Leaving directory `/root/ptlib-2.6.2/src/ptlib/unix' make[1]: *** [/root/pwlib/lib_linux_x86/libpt_d.so] Error 2 make[1]: Leaving directory `/root/openmcu-v2_2_4-src/applications/openmcu' make: *** [debug] Error 2 I have set: PTLIBDIR=/root/pwlib PTLIBPLUGINDIR=/usr/local/lib/pwlib/ Any other suggestions for making OpenMCU debuggable? thanks Michael "If you're clear in your vision and trust the people in your team with clear objectives, they will invariably do their best to achieve everything desired, and usually deliver everything you could have hoped for and even more." -Paul Debevec

2 1

Re: [h323plus] RES: RES: RES: Expired certificate?
by Michael Miller 27 May '09

27 May '09

Leandro, Thanks! that resolved the problem with the certificate. And setting the PTLIBPLUGINDIR solved the video problem! I'm so close! But now it's not registering with GNU Gatekeeper. I think it's a password problem. I can see how to 'add' a password with addpasswd but addpasswd is giving me a floating point error. I'm compiling gnugk 2.2.8 now. And I'll let you know what happens. Thanks much for your help. Michael "If you're clear in your vision and trust the people in your team with clear objectives, they will invariably do their best to achieve everything desired, and usually deliver everything you could have hoped for and even more." -Paul Debevec ----- Original Message ----- From: "leandro alvares" <leandro.alvares(a)caixa.gov.br> To: mimiller(a)ncsa.uiuc.edu Sent: Wednesday, May 27, 2009 4:13:14 PM GMT -06:00 US/Canada Central Subject: RES: [h323plus] RES: RES: Expired certificate? by default, the libavcodec.so need to be at /usr/local/lib. like this: debian:/opt# ls -la /usr/local/lib/ total 10552 drwxr-sr-x 5 root staff 4096 2009-02-09 14:32 . drwxrwsr-x 10 root staff 4096 2008-11-24 15:13 .. lrwxrwxrwx 1 root staff 29 2009-02-02 19:01 libh323_linux_x86_r.so -> libh323_linux_x86_r.so.1.20.2 lrwxrwxrwx 1 root staff 29 2009-02-02 19:01 libh323_linux_x86_r.so.1 -> libh323_linux_x86_r.so.1.20.2 lrwxrwxrwx 1 root staff 29 2009-02-02 19:01 libh323_linux_x86_r.so.1.20 -> libh323_linux_x86_r.so.1.20.2 -r--r--r-- 1 root staff 8247042 2009-02-02 19:01 libh323_linux_x86_r.so.1.20.2 lrwxrwxrwx 1 root staff 14 2009-02-09 14:32 libh323_linux_x86_r.so.1.20-alpha2 -> libopenh323.so lrwxrwxrwx 1 root staff 22 2009-02-02 19:01 libopenh323.so -> libh323_linux_x86_r.so lrwxrwxrwx 1 root staff 26 2009-02-02 17:22 libpt_linux_x86_r.so -> libpt_linux_x86_r.so.2.0.1 lrwxrwxrwx 1 root staff 26 2009-02-02 17:22 libpt_linux_x86_r.so.2 -> libpt_linux_x86_r.so.2.0.1 lrwxrwxrwx 1 root staff 26 2009-02-02 17:22 libpt_linux_x86_r.so.2.0 -> libpt_linux_x86_r.so.2.0.1 -r--r--r-- 1 root staff 2516297 2009-02-02 17:22 libpt_linux_x86_r.so.2.0.1 lrwxrwxrwx 1 root staff 20 2009-02-02 17:22 libpt.so -> libpt_linux_x86_r.so drwxr-sr-x 3 root staff 4096 2009-02-02 17:20 ptlib drwxr-sr-x 3 root staff 4096 2009-02-03 14:47 pwlib drwxrwsr-x 3 root staff 4096 2008-11-24 15:20 python2.4 if it isn't, try to link. You can to link the libavcodec.so to avcodec too. About the openmcu.pid error, I'm not sure if you can run if other user else root. Because you are putting -u mimiller. Can you run as root? I didn't have this error (permission denied) because I always run as root. try to do this Regards, Leandro -----Mensagem original----- De: Michael Miller [mailto:mimiller@ncsa.uiuc.edu] Enviada em: quarta-feira, 27 de maio de 2009 17:14 Para: Leandro Oliveira Alvares Assunto: Re: [h323plus] RES: RES: Expired certificate? Leandro, I've attached a strace file. I'm running openmcu as a regular user with the -u flag. thanks Michael "If you're clear in your vision and trust the people in your team with clear objectives, they will invariably do their best to achieve everything desired, and usually deliver everything you could have hoped for and even more." -Paul Debevec ----- Original Message ----- From: "leandro alvares" <leandro.alvares(a)caixa.gov.br> To: h323plus(a)lists.packetizer.com Sent: Wednesday, May 27, 2009 2:54:33 PM GMT -06:00 US/Canada Central Subject: [h323plus] RES: RES: Expired certificate? Hi Mik, sorry to delay. Are you running the application as root. I'm not sure how to souve this problem. can you send me the strace output? Regards, Leandro -----Mensagem original----- De: h323plus-bounces(a)lists.packetizer.com [mailto:h323plus-bounces@lists.packetizer.com] Em nome de Michael Miller Enviada em: quarta-feira, 27 de maio de 2009 12:59 Para: h323plus(a)lists.packetizer.com Assunto: Re: [h323plus] RES: Expired certificate? Leandro, Yes, the cert error occurs on start. Here's the output I get when I run openmcu: ~]$ /bin/openmcu -c -n -d --video -u mimiller --defaultroom ncsa1 error loading /usr/local/lib/pwlib/avcodec - /usr/local/lib/pwlib/avcodec: cannot open shared object file: No such file or directory error loading /usr/local/lib/pwlib/libavcodec.so - /usr/local/lib/pwlib/libavcodec.so: cannot open shared object file: No such file or directory All output for OpenMCU is to console. 2009/05/27 10:56:16.171 OpenMCU Message Starting service process "OpenMCU" v2.2.4 2009/05/27 10:56:16.176 OpenMCU Debug3 PWLib File handle high water mark set: 5 Thread unblock pipe Daemon started with pid 20901 Could not write pid to file "/var/run/openmcu.pid" - Permission denied 2009/05/27 10:56:16.184 OpenMCU Debug3 [mimiller@roeshamboe ~]$ 2009/05/27 10:56:16.193 OpenMCU Debug3 PTLib Thread high water mark set: 2 2009/05/27 10:56:16.197 OpenMCU Debug3 PWLib File handle high water mark set: 7 Thread unblock pipe 2009/05/27 10:56:16.200 OpenMCU Debug3 PTLib Thread high water mark set: 3 2009/05/27 10:56:16.204 OpenMCU Debug3 PWLib File handle high water mark set: 9 Thread unblock pipe 2009/05/27 10:56:16.207 OpenMCU Debug3 PTLib Thread high water mark set: 4 2009/05/27 10:56:16.210 H323 Cleaner:0xb7f03b90 Debug3 H323 Started cleaner thread 2009/05/27 10:56:16.213 OpenMCU Debug3 H323 Created endpoint. 2009/05/27 10:56:16.216 OpenMCU Debug3 PWLib File handle high water mark set: 11 Thread unblock pipe 2009/05/27 10:56:16.219 OpenMCU Debug3 PTLib Thread high water mark set: 5 2009/05/27 10:56:16.222 PXConfigWr...0xb7ec2b90 Debug3 PTLib Config file cache write back thread started. 2009/05/27 10:56:16.226 OpenMCU Debug3 PTLib Created PXConfig 0x877b130 2009/05/27 10:56:16.228 OpenMCU Debug3 PTLib Reading config file: /home/mimiller/.pwlib_config/openmcu.ini OpenMCU: Could not open trace output file "/bin/c:\trace.txt"2009/05/27 10:56:16.233 OpenMCU Debug3 0:00.483 OpenMCU Version 2.2.4 by H323plus on Unix Linux (2.6.25.14-69.fc8-i686) with PTLib (v2.6.2) at 2009/5/27 10:56:16.232 2009/05/27 10:56:16.421 OpenMCU Fatal error MCU Could not load certificate "server.pem" 2009/05/27 10:56:16.424 OpenMCU Debug3 0:00.674 OpenMCU PTLib Destroyed PXConfig 0x877b130 2009/05/27 10:56:16.432 OpenMCU Debug3 0:00.687 Housekeeper:0xb7f85b90 Housekeeping thread ended 0:00.688 OpenMCU PTLib Unblocking I/O fd=0 thread=Housekeeper:0xb7f85b90 0:00.689 OpenMCU WaitForTermination on 3086506896 finished 0:00.690 OpenMCU PTLib Destroyed thread 0x877b538 Housekeeper:0xb7f85b90(id = b7f85b90) 0:00.692 OpenMCU PTLib Unblocking I/O fd=10 thread=PXConfigWriteThread:0xb7ec2b90 0:00.692 OpenMCU WaitForTermination on 3085708176 finished 0:00.693 OpenMCU PTLib Destroyed thread 0x877c568 PXConfigWriteThread:0xb7ec2b90(id = b7ec2b90) Here's what I have in .pwlib_config/.ini .pwlib_config]$ more .ini [Parameters] Username=agnode Password=IuXQ/q2bx9tLDc12vjbzxA== Log Level=2 HTTP Port=1420 Interface Array Size=0 Gatekeeper Mode=Use gatekeeper Gatekeeper=141.142.224.40 Gatekeeper Username=NCSA_MCU Gatekeeper Password=LNpGEVnhuTA= Gatekeeper Room Names=ncsa* Gatekeeper Prefixes Array Size=0 Enable video=True Video frame rate=30 Video quality=1 Default room=ncsa1 Room time limit=0 Connecting WAV File=/home/mimiller/connecting.wav Entering WAV File=/home/mimiller/entering.wav Leaving WAV File=/home/mimiller/leaving.wav Call log filename=/home/mimiller/mcu_log.txt Force split screen video=False I don't see anything referring to a certificate in the config. Should I be looking somewhere else? thanks Michael "If you're clear in your vision and trust the people in your team with clear objectives, they will invariably do their best to achieve everything desired, and usually deliver everything you could have hoped for and even more." -Paul Debevec ----- Original Message ----- From: "leandro alvares" <leandro.alvares(a)caixa.gov.br> To: h323plus(a)lists.packetizer.com Sent: Wednesday, May 27, 2009 9:44:47 AM GMT -06:00 US/Canada Central Subject: [h323plus] RES: Expired certificate? Hi Mik, this archive is not mandatory. Does it occurs when you start the application? if yes, try to change config archive located by default at $HOME/.pwlib_config/.ini. You can delete the certificate parameter. Regards, Leandro -----Mensagem original----- De: h323plus-bounces(a)lists.packetizer.com [mailto:h323plus-bounces@lists.packetizer.com] Em nome de Michael Miller Enviada em: terça-feira, 26 de maio de 2009 17:43 Para: h323plus Assunto: [h323plus] Expired certificate? Hello, I've gotten openmcu to compile but now I'm running into an error with the certificate? I hadn't had this problem before when I compiled OpenMCU 2.2.3? ... 2009/05/26 14:23:34.646 OpenMCU Fatal error MCU Could not load certificate "server.pem" ... [ ~]# openssl verify /root/openmcu-v2_2_3-src/server.pem /root/openmcu-v2_2_3-src/server.pem: /CN=OpenMCU@rapido/O=Post Increment error 18 at 0 depth lookup:self signed certificate /CN=OpenMCU@rapido/O=Post Increment error 10 at 0 depth lookup:certificate has expired OK I can try a different server certificate from another repository, or will this cause me problems? Also, where should this certificate reside? thanks Michael "If you're clear in your vision and trust the people in your team with clear objectives, they will invariably do their best to achieve everything desired, and usually deliver everything you could have hoped for and even more." -Paul Debevec

1 0

Re: [h323plus] RES: Expired certificate?
by Michael Miller 27 May '09

27 May '09

Leandro, Yes, the cert error occurs on start. Here's the output I get when I run openmcu: ~]$ /bin/openmcu -c -n -d --video -u mimiller --defaultroom ncsa1 error loading /usr/local/lib/pwlib/avcodec - /usr/local/lib/pwlib/avcodec: cannot open shared object file: No such file or directory error loading /usr/local/lib/pwlib/libavcodec.so - /usr/local/lib/pwlib/libavcodec.so: cannot open shared object file: No such file or directory All output for OpenMCU is to console. 2009/05/27 10:56:16.171 OpenMCU Message Starting service process "OpenMCU" v2.2.4 2009/05/27 10:56:16.176 OpenMCU Debug3 PWLib File handle high water mark set: 5 Thread unblock pipe Daemon started with pid 20901 Could not write pid to file "/var/run/openmcu.pid" - Permission denied 2009/05/27 10:56:16.184 OpenMCU Debug3 [mimiller@roeshamboe ~]$ 2009/05/27 10:56:16.193 OpenMCU Debug3 PTLib Thread high water mark set: 2 2009/05/27 10:56:16.197 OpenMCU Debug3 PWLib File handle high water mark set: 7 Thread unblock pipe 2009/05/27 10:56:16.200 OpenMCU Debug3 PTLib Thread high water mark set: 3 2009/05/27 10:56:16.204 OpenMCU Debug3 PWLib File handle high water mark set: 9 Thread unblock pipe 2009/05/27 10:56:16.207 OpenMCU Debug3 PTLib Thread high water mark set: 4 2009/05/27 10:56:16.210 H323 Cleaner:0xb7f03b90 Debug3 H323 Started cleaner thread 2009/05/27 10:56:16.213 OpenMCU Debug3 H323 Created endpoint. 2009/05/27 10:56:16.216 OpenMCU Debug3 PWLib File handle high water mark set: 11 Thread unblock pipe 2009/05/27 10:56:16.219 OpenMCU Debug3 PTLib Thread high water mark set: 5 2009/05/27 10:56:16.222 PXConfigWr...0xb7ec2b90 Debug3 PTLib Config file cache write back thread started. 2009/05/27 10:56:16.226 OpenMCU Debug3 PTLib Created PXConfig 0x877b130 2009/05/27 10:56:16.228 OpenMCU Debug3 PTLib Reading config file: /home/mimiller/.pwlib_config/openmcu.ini OpenMCU: Could not open trace output file "/bin/c:\trace.txt"2009/05/27 10:56:16.233 OpenMCU Debug3 0:00.483 OpenMCU Version 2.2.4 by H323plus on Unix Linux (2.6.25.14-69.fc8-i686) with PTLib (v2.6.2) at 2009/5/27 10:56:16.232 2009/05/27 10:56:16.421 OpenMCU Fatal error MCU Could not load certificate "server.pem" 2009/05/27 10:56:16.424 OpenMCU Debug3 0:00.674 OpenMCU PTLib Destroyed PXConfig 0x877b130 2009/05/27 10:56:16.432 OpenMCU Debug3 0:00.687 Housekeeper:0xb7f85b90 Housekeeping thread ended 0:00.688 OpenMCU PTLib Unblocking I/O fd=0 thread=Housekeeper:0xb7f85b90 0:00.689 OpenMCU WaitForTermination on 3086506896 finished 0:00.690 OpenMCU PTLib Destroyed thread 0x877b538 Housekeeper:0xb7f85b90(id = b7f85b90) 0:00.692 OpenMCU PTLib Unblocking I/O fd=10 thread=PXConfigWriteThread:0xb7ec2b90 0:00.692 OpenMCU WaitForTermination on 3085708176 finished 0:00.693 OpenMCU PTLib Destroyed thread 0x877c568 PXConfigWriteThread:0xb7ec2b90(id = b7ec2b90) Here's what I have in .pwlib_config/.ini .pwlib_config]$ more .ini [Parameters] Username=agnode Password=IuXQ/q2bx9tLDc12vjbzxA== Log Level=2 HTTP Port=1420 Interface Array Size=0 Gatekeeper Mode=Use gatekeeper Gatekeeper=141.142.224.40 Gatekeeper Username=NCSA_MCU Gatekeeper Password=LNpGEVnhuTA= Gatekeeper Room Names=ncsa* Gatekeeper Prefixes Array Size=0 Enable video=True Video frame rate=30 Video quality=1 Default room=ncsa1 Room time limit=0 Connecting WAV File=/home/mimiller/connecting.wav Entering WAV File=/home/mimiller/entering.wav Leaving WAV File=/home/mimiller/leaving.wav Call log filename=/home/mimiller/mcu_log.txt Force split screen video=False I don't see anything referring to a certificate in the config. Should I be looking somewhere else? thanks Michael "If you're clear in your vision and trust the people in your team with clear objectives, they will invariably do their best to achieve everything desired, and usually deliver everything you could have hoped for and even more." -Paul Debevec ----- Original Message ----- From: "leandro alvares" <leandro.alvares(a)caixa.gov.br> To: h323plus(a)lists.packetizer.com Sent: Wednesday, May 27, 2009 9:44:47 AM GMT -06:00 US/Canada Central Subject: [h323plus] RES: Expired certificate? Hi Mik, this archive is not mandatory. Does it occurs when you start the application? if yes, try to change config archive located by default at $HOME/.pwlib_config/.ini. You can delete the certificate parameter. Regards, Leandro -----Mensagem original----- De: h323plus-bounces(a)lists.packetizer.com [mailto:h323plus-bounces@lists.packetizer.com] Em nome de Michael Miller Enviada em: terça-feira, 26 de maio de 2009 17:43 Para: h323plus Assunto: [h323plus] Expired certificate? Hello, I've gotten openmcu to compile but now I'm running into an error with the certificate? I hadn't had this problem before when I compiled OpenMCU 2.2.3? ... 2009/05/26 14:23:34.646 OpenMCU Fatal error MCU Could not load certificate "server.pem" ... [ ~]# openssl verify /root/openmcu-v2_2_3-src/server.pem /root/openmcu-v2_2_3-src/server.pem: /CN=OpenMCU@rapido/O=Post Increment error 18 at 0 depth lookup:self signed certificate /CN=OpenMCU@rapido/O=Post Increment error 10 at 0 depth lookup:certificate has expired OK I can try a different server certificate from another repository, or will this cause me problems? Also, where should this certificate reside? thanks Michael "If you're clear in your vision and trust the people in your team with clear objectives, they will invariably do their best to achieve everything desired, and usually deliver everything you could have hoped for and even more." -Paul Debevec

2 1

Expired certificate?
by Michael Miller 27 May '09

27 May '09

Hello, I've gotten openmcu to compile but now I'm running into an error with the certificate? I hadn't had this problem before when I compiled OpenMCU 2.2.3? ... 2009/05/26 14:23:34.646 OpenMCU Fatal error MCU Could not load certificate "server.pem" ... [ ~]# openssl verify /root/openmcu-v2_2_3-src/server.pem /root/openmcu-v2_2_3-src/server.pem: /CN=OpenMCU@rapido/O=Post Increment error 18 at 0 depth lookup:self signed certificate /CN=OpenMCU@rapido/O=Post Increment error 10 at 0 depth lookup:certificate has expired OK I can try a different server certificate from another repository, or will this cause me problems? Also, where should this certificate reside? thanks Michael "If you're clear in your vision and trust the people in your team with clear objectives, they will invariably do their best to achieve everything desired, and usually deliver everything you could have hoped for and even more." -Paul Debevec

2 1