Paul,
If the called endpoint sends a TCS message as the first tunneled message, did it understand the field in the Setup message that is used as part of what we call "Early H.245" or did it send that as part of the normal H.245 tunneling?
This is why we say that, to acknowledge the Early H.245, the first message much be an ack-- we have to have some distinguishing mechanism. If the first message received from the calling endpoint is a TCS, we know that the Early H.245 mechanism was not understood.
It does seem, though, that the first sentence should be restricted to say that the first two message the calling endpoint sends are TCS and MSDet. Would that help? We may need to change the few sentences to make this clearer.
BTW, I corrected the section numbers-- the APC posted this morning should be correct, but if not, let me know! (Francois beat you to the punch :-) )
Paul
----- Original Message ----- From: "Paul Long" plong@PACKETIZER.COM To: ITU-SG16@mailbag.cps.intel.com Sent: Thursday, November 02, 2000 1:38 AM Subject: TCS is always first message, not TCSAck
This one concerns me a great deal.
H.323 has always required that an EP send TCS as the very first H.245 message regardless of whether the EP is the calling or called EP (8.2/H.323v4: "...the H.245 terminalCapabilitySet message ... shall be the first H.245 message sent."). No exceptions. (There are two sections
labeled
"8.2.3", so I'll call the second one, "8.2.3+".) And 8.2.3+/H.323v4 even reiterates this ("As detailed in section 8.2, the first two H.245 messages sent by an endpoint on the H.245 Control Channel are the terminalCapabilitySet message and the masterSlaveDetermination
messages.").
However, 8.2.3+/H.323v4 goes on to say that the called EP sends TCSAck first, which clearly contradicts 8.2 and itself! Therefore, in order to resolve this contradiction and restore backwards compatibility with
previous
versions of H.323, the fix is to simply say that _TCS_ is the first
message
sent by the called EP and not _TCSAck_. Here are the three necessary mods ("[...]" means insert; "<...>" means delete).
1. 8.2.3+/H.323v4: "To indicate that the called entity understands
the
earlyH245Control field, the first H.245 message that the called entity
sends
shall be the terminalCapabilitySet<Ack> message tunneled in the H.225.0
Call
Signalling Channel."
2. Table 41/H.323v4: <TerminalCapabilitySetAck(calling endpoint) TerminalCapabilitySet(called endpoint)> [TerminalCapabilitySet(called endpoint) TerminalCapabilitySetAck(calling endpoint)] 3. 8.2.3+/H.323v4: "The calling entity shall recognize that theearlyH245Control field was not understood when either it receives a
Connect
message and still has not received a< response to the initial> terminalCapabilitySet message, the first H.245 message received from the called entity is not a tunneled terminalCapabilitySet<Ack> message, or fastStart or fastConnectRefused is received and< no response has been received for the>[ a] terminalCapabilitySet message [has not been received]."
Paul Long ipDialog
For help on this mail list, send "HELP ITU-SG16" in a message to listserv@mailbag.intel.com
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ For help on this mail list, send "HELP ITU-SG16" in a message to listserv@mailbag.intel.com