Hi Victor,
can you confirm video capture device (camera) is connected to your system?
Regards, Ashwani
On Wednesday 30 November 2011 07:24 AM, Victor Zanozin wrote:
Just on this...
I have attached logs of this issue, and have noticed a lot of lines with, "VideoGrabber is unavailable". Is this something to do with the issue described below?
Thanks in advance!
Victor
*From:*h323plus-bounces@lists.packetizer.com [mailto:h323plus-bounces@lists.packetizer.com] *On Behalf Of *Victor Zanozin *Sent:* Wednesday, 30 November 2011 11:58 AM *To:* Simon Horne; h323plus@lists.packetizer.com *Subject:* Re: [h323plus] Removing H.263/H.264 Capabilities in OpenMCU
Hi Simon,
I can't see any difference in the logs with environment variable PTLIB_TRACE_CODECS set to 4. Should this just be going to the regular OpenMCU log (/c:\trace.txt)?
Also, even if I am temporarily stuck with H.261, when new endpoints join, video on the first endpoint freezes, and the new endpoint is not displayed until either endpoint disconnects, then it switches back to whichever endpoint is still connected and video resumes.
Any ideas on that?
*Victor *
*From:*Simon Horne [mailto:s.horne@packetizer.com] *Sent:* Wednesday, 30 November 2011 8:22 AM *To:* Victor Zanozin; h323plus@lists.packetizer.com *Subject:* RE: [h323plus] Removing H.263/H.264 Capabilities in OpenMCU
Victor
The reason why your codecs are loading and then unloading is that the codec checks to see if all the dependencies are present and if they are not then the codec is unloaded.
It is not clear on the platform you are running on but make sure you have both x264 and FFMPEG dependencies binaries are in path.
Using environmental variable PTLIB_TRACE_CODECS = 4 to output trace log information on why the dependencies are not found.
Simon
*From:*h323plus-bounces@lists.packetizer.com [mailto:h323plus-bounces@lists.packetizer.com] *On Behalf Of *Victor Zanozin *Sent:* 29 November 2011 08:06 *To:* h323plus@lists.packetizer.com *Subject:* [h323plus] Removing H.263/H.264 Capabilities in OpenMCU
Hi guys,
I'm getting stuck with OpenMCU loading, and only starting the H.261 codecs.
It seems it can detect H.263/H.264, but removes them shortly after detection, and then only shows one set of codecs in the video section of the startup.
Logs:
0:00.030 OpenMCU H323 Found capability: H.239 Capabilities <18>
H.263{sw} <1>0:00.030 OpenMCU H323 Removing capability: H.239 Capabilities <18>
H.263{sw} <1>0:00.030 OpenMCU H323 FindCapability: "H.239 Capabilities"
0:00.030 OpenMCU H323 FindCapability: "*-QCIF*"
0:00.030 OpenMCU H323 Found capability: H.261-QCIF{sw} <14>
0:00.030 OpenMCU H323 Removing capability: H.261-QCIF{sw} <14>
0:00.030 OpenMCU H323 FindCapability: "*-QCIF*"
0:00.030 OpenMCU H323 FindCapability: "*-SQCIF*"
0:00.030 OpenMCU H323 FindCapability: "H.261{sw}"
0:00.030 OpenMCU H323 Found capability: H.261{sw} <15>
0:00.030 OpenMCU H323 Removing capability: H.261{sw} <15>
0:00.030 OpenMCU H323 FindCapability: "H.261{sw}"
0:00.030 OpenMCU H323 FindCapability: "H.263{sw}"
0:00.030 OpenMCU H323 Found capability: H.263{sw} <16>
0:00.030 OpenMCU H323 Removing capability: H.263{sw} <16>
0:00.030 OpenMCU H323 FindCapability: "H.263{sw}"
0:00.030 OpenMCU H323 FindCapability: "H.264{sw}"
0:00.031 OpenMCU H323 Found capability: H.264{sw} <17>
0:00.031 OpenMCU H323 Removing capability: H.264{sw} <17>
Codecs loaded:
1: H.261-CIF{sw} <13>I'm also seeing no split screen video -- When new endpoints join, video on the first endpoint freezes, and the new endpoint is not displayed until either endpoint disconnects, then it switches back to whichever endpoint is still connected and video resumes.
Can anyone help?
Thanks!
**
*Victor*
This footnote confirms that this email message has been scanned
by MessageLabs Email Security Service for the presence of computer viruses.
BBY IT Support + 61 2 9226 0123
This footnote confirms that this email message has been scanned
by MessageLabs Email Security Service for the presence of computer viruses.
BBY IT Support + 61 2 9226 0123