static vs dynamic configuration
alevine at RADVISION.COM
Tue Jun 20 09:54:06 EDT 2000
presence of the Gatekeeper introduces simple benefit to the H.323 network -
manageability. Now, in your "dynamic" configuration, you can freely move your
gateways around, change their IP addresses, change supported services, aliases,
phone numbers and so on, and the only entity which should be aware of all these
changes is Gatekeeper - also please note that it can be updated automatically
via RAS messages. It means that when you do have a Gatekeeper, anyone who needs
to place calls inside of your network, or anyone who will call into your network
from outside need not to be aware of any changes in gateway configurations.
Additionally, Gatekeeper might provide a wealth of add-on services, like line or
group hunting (when it will look for available gateway among the group which can
terminate your call) and others.
"Agboh, Charles" wrote:
> I am not sure if this is the place to ask this question but I would like
> some comments on the following.
> in a static configuration I have H.323 gateways deployed with no gatekeeper
> in a dynamic configuration I have the static configuation with a gatekeeper.
> What are the advantages of the dynamic configuration over the static
> Charles Keli Agboh
> Data and Access
> R&D - GTS Network Services
> Terhulpsesteenweg 6A
> 1560 Hoeilaart (Brussels) Belgium
> Direct: +32 2 658 4243
> Mobile: +32 479 28 97 35
> Fax: +32 2 700 43 66
> Email: charles.agboh at gtsgroup.com
> For help on this mail list, send "HELP ITU-SG16" in a message to
> listserv at mailbag.intel.com
-------------- next part --------------
A non-text attachment was scrubbed...
Size: 306 bytes
Desc: Card for Anatoli Levine
More information about the sg16-avd