[h323plus] Removing H.263/H.264 Capabilities in OpenMCU

[Victor Zanozin]

Hi guys,

I'm getting stuck with OpenMCU loading, and only starting the H.261 codecs.

It seems it can detect H.263/H.264, but removes them shortly after detection, and then only shows one set of codecs in the video section of the startup.

Logs:

  0:00.030                      OpenMCU H323    Found capability: H.239 Capabilities <18>
            H.263{sw} <1>
  0:00.030                      OpenMCU H323    Removing capability: H.239 Capabilities <18>
            H.263{sw} <1>
  0:00.030                      OpenMCU H323    FindCapability: "H.239 Capabilities"
  0:00.030                      OpenMCU H323    FindCapability: "*-QCIF*"
  0:00.030                      OpenMCU H323    Found capability: H.261-QCIF{sw} <14>
  0:00.030                      OpenMCU H323    Removing capability: H.261-QCIF{sw} <14>
  0:00.030                      OpenMCU H323    FindCapability: "*-QCIF*"
  0:00.030                      OpenMCU H323    FindCapability: "*-SQCIF*"
  0:00.030                      OpenMCU H323    FindCapability: "H.261{sw}"
  0:00.030                      OpenMCU H323    Found capability: H.261{sw} <15>
  0:00.030                      OpenMCU H323    Removing capability: H.261{sw} <15>
  0:00.030                      OpenMCU H323    FindCapability: "H.261{sw}"
  0:00.030                      OpenMCU H323    FindCapability: "H.263{sw}"
  0:00.030                      OpenMCU H323    Found capability: H.263{sw} <16>
  0:00.030                      OpenMCU H323    Removing capability: H.263{sw} <16>
  0:00.030                      OpenMCU H323    FindCapability: "H.263{sw}"
  0:00.030                      OpenMCU H323    FindCapability: "H.264{sw}"
  0:00.031                      OpenMCU H323    Found capability: H.264{sw} <17>
  0:00.031                      OpenMCU H323    Removing capability: H.264{sw} <17>

Codecs loaded:

     1:
       H.261-CIF{sw} <13>

I'm also seeing no split screen video - When new endpoints join, video on the first endpoint freezes, and the new endpoint is not displayed until either endpoint disconnects, then it switches back to whichever endpoint is still connected and video resumes.

Can anyone help?

Thanks!

Victor
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.packetizer.com/pipermail/h323plus/attachments/20111129/12fca3ae/attachment-0001.html>