[h323plus] Video Resolution

Simon Horne s.horne at spranto.com.au
Fri Jan 15 08:14:23 EST 2010


Carlos
 
The current behaviour is correct. 
 
The old OpenH323 used to only send CIF with *-CIF{sw} capability and only
QCIF with *-QCIF{sw} . This was changed with the video plugins so the
capability could do up to CIF so it would also supported QCIF. This is
perfectly H.245 legal.
 
In this way only 1 capability can do both frame sizes. This is the way most
manufacturers implement the capability exchange.  
The capability has a flag for the size it supports so the old CIF capability
used to say QCIF - 0 CIF - 1. So if you wanted to do QCIF you had to use the
*-QCIF{sw} capability as the QCIF flag in the *-CIF{sw} was 0. This was
changed so that the *-CIF{sw} capability had the QCIF flag so it could also
support QCIF. Then it was safe to remove the *-QCIF{sw} capability and only
exchange using the *-CIF{sw}. 
 
Now SetVideoFrameSize() will set the global frame size limit so regardless
of the direction that will be the maximum size permitted (if CIF only up to
CIF capability is available). The codec.FrameSize() in the
MyH323Endpoint::OpenVideoChannel() allows the implementor to set the actual
frame size to send. 
 
Is there something else I missed?
 
Simon
 
 

  _____  

From: Carlos Haj [mailto:unazona at hotmail.com] 
Sent: Friday, 15 January 2010 8:39 PM
To: s.horne at packetizer.com; h323plus at lists.packetizer.com
Subject: RE: [h323plus] Video Resolution


Simon,

Thanks for your quick answer, just noticed that I had a bad thread name;)

Well, I have the codec.SetFrameSize(w, h); in my OpenVideoChannel

When adding capabilities I use

AddAllCapabilities(0, P_MAX_INDEX, "*");
SetVideoFrameSize(H323Capability::cifMPI);

Capabilities table shows as 

Set 0: 0: audio
          1: H.261-CIF{sw}

I receive an OpenVideoChannel for encoder, I open channel and attach video
reader + colourConverter, just after that I receive a close video signal
from a H245Negotation, here I join Call Stack

>   testApp.exe!mmDDSVideoOutputBridge::close2()  Ligne 359    C++
     testApp.exe!mmVideoInputDevice::~mmVideoInputDevice()  Ligne 43 + 0x1b
C++
     testApp.exe!mmVideoInputDevice::`scalar deleting destructor'()  + 0x2b
C++
     testApp.exe!PVideoChannel::CloseVideoReader()  Ligne 203 + 0x24    C++
     testApp.exe!PVideoChannel::Close()  Ligne 145    C++
     testApp.exe!H323Codec::CloseRawDataChannel()  Ligne 488 + 0x11    C++
     testApp.exe!H323VideoCodec::Close()  Ligne 747    C++
     testApp.exe!H323Channel::CleanUpOnTermination()  Ligne 716    C++
     testApp.exe!H323_RTPChannel::CleanUpOnTermination()  Ligne 1160    C++
     testApp.exe!H245NegLogicalChannel::Release()  Ligne 1219    C++
     testApp.exe!H245NegLogicalChannel::HandleCloseAck(const
H245_CloseLogicalChannelAck & __formal={...})  Ligne 1086    C++
     testApp.exe!H245NegLogicalChannels::HandleCloseAck(const
H245_CloseLogicalChannelAck & pdu={...})  Ligne 1372 + 0xf    C++
     testApp.exe!H323Connection::OnH245Response(const H323ControlPDU &
pdu={...})  Ligne 3293 + 0x22    C++
     testApp.exe!H323Connection::HandleControlPDU(const H323ControlPDU &
pdu={...})  Ligne 3189 + 0x12    C++
     testApp.exe!H323Connection::HandleControlData(PPER_Stream & strm={...})
Ligne 3170 + 0x18    C++
     testApp.exe!H323Connection::HandleReceivedControlPDU(bool
readStatus=true, PPER_Stream & strm={...})  Ligne 3103 + 0x12    C++
     testApp.exe!H323Connection::HandleControlChannel()  Ligne 3085 + 0x13
C++
     testApp.exe!H245TransportThread::Main()  Ligne 700    C++


If I remove the "SetVideoFrameSize(H323Capability::cifMPI);", I get the
following capabilities set

1: H.261-CIF{sw}
    H.261-QCIF{sw}
    H.261{sw}

with exactly same strange behaviour, QCIF is not sending while CIF is being
received, by the way qcif endpoint says

Local Video Codec - H.261-CIF{sw}
Local Resolution - 176x144

Remote Video Codec - H.261-CIF{sw}
Remote Resolution - 352x288


I tried a "ReorderCapabilities(PStringArray("QCIF"));" after my
addcapabilities, I ended up with both endpoints using QCIF and ignoring my
SetFrameSize anyway!!

Is there a glitch using H323Plus video plugins? my code works perfectly on
openh323 stack.

"SetVideoFrameSize(H323Capability::cifMPI);" is supposed to define a maximum
video resolution?! as you said in API doc "... to set the maximum framesize
allowed to the specified value "

Is that usual to have H.261-CIF with a QCIF resolution? On which order codec
plugins can be added to avoid such problems of negotiation?

Regards


  _____  

From: s.horne at packetizer.com
To: unazona at hotmail.com; h323plus at lists.packetizer.com
Subject: RE: [h323plus] Valid sessionID in OpenLogicalChannel command
Date: Fri, 15 Jan 2010 08:12:54 +1000


Carlos
 
In your derived
H323EndPoint::OpenVideoChannel(()
 
(isEncoding)
     codec.SetFrameSize(w,h);
 
Simon
 
 
 


  _____  

From: h323plus-bounces at lists.packetizer.com
[mailto:h323plus-bounces at lists.packetizer.com] On Behalf Of Carlos Haj
Sent: Friday, 15 January 2010 12:59 AM
To: h323plus at lists.packetizer.com
Subject: Re: [h323plus] Valid sessionID in OpenLogicalChannel command


Hello Guys,

I would like to have different frame sizes for two endpoints, first I tried
to play around with H323Endpoint::SetVideoFrameSize, but it seems that part
changes the maximum allowed size, which means that if I switch the
videoFrameSize to qCIF, I wouldn't be able to receive CIF from the other
endpoint. my test only received QCIF.

I tried also to modify the OpalMediaFormat by using a GetWritableMediaFormat
for a capability, that ended with unusual CIF format while having a QCIF
resolution.

On the other hand, I looked Opal examples where they use an OpalManager, but
unfortuntly that seems incompatible with h323plus, while old openh323
tutorials and exampls don't have any video plugins support.

How I can manage to receive and send different resolutions (frame sizes)
using H323plus?

I appreciate a lot your help
Carlos



 <http://clk.atdmt.com/FRM/go/182932252/direct/01/> 

  _____  

Discute avec tes amis partout, grâce à Messenger sur ton mobile. Cliquez ici
! <http://www.messengersurvotremobile.com/>  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.packetizer.com/pipermail/h323plus/attachments/20100115/56a8c234/attachment.htm>


More information about the h323plus mailing list