[h323plus] h323plus 1.22, ptlib 2.8.2, openmcu 2.2.5 - can't get H.263 to load
Dave Smulsky
dave at onewebway.com
Thu Aug 19 08:40:42 EDT 2010
Simon,
On my RHEL (actually Oracle Enterprise Linux) machine I initially
attempted this on with the same PTLIB/H323PLUS/OPENMCU combo, heres the
level 5 output when I start OpenMCU. It looks like it loads everything
then removes them, and I am only left with H.261 CIF
2010/08/19 08:36:11.342 OpenMCU Debug3 H323 Added
capability: H.239 Capabilities <29>
2010/08/19 08:36:11.343 OpenMCU Debug3 H323 Found
capability: H.239 Capabilities <29>
2010/08/19 08:36:11.343 OpenMCU Debug3 H323 Added
capability: H.263{sw} <1>
2010/08/19 08:36:11.344 OpenMCU Debug3 H323 Found
capability: H.239 Capabilities <29>
H.263{sw} <1>
2010/08/19 08:36:11.344 OpenMCU Debug3 H323 Removing
capability: H.239 Capabilities <29>
H.263{sw} <1>
2010/08/19 08:36:11.345 OpenMCU Debug3 H323 Found
capability: H.261-QCIF{sw} <25>
2010/08/19 08:36:11.345 OpenMCU Debug3 H323 Removing
capability: H.261-QCIF{sw} <25>
2010/08/19 08:36:11.345 OpenMCU Debug3 H323 Found
capability: H.261{sw} <26>
2010/08/19 08:36:11.346 OpenMCU Debug3 H323 Removing
capability: H.261{sw} <26>
2010/08/19 08:36:11.346 OpenMCU Debug3 H323 Found
capability: H.263{sw} <27>
2010/08/19 08:36:11.347 OpenMCU Debug3 H323 Removing
capability: H.263{sw} <27>
2010/08/19 08:36:11.347 OpenMCU Debug3 H323 Found
capability: MPEG4{sw} <28>
2010/08/19 08:36:11.348 OpenMCU Debug3 H323 Removing
capability: MPEG4{sw} <28>
1:
H.261-CIF{sw} <24>
On Wed, August 18, 2010 4:31 pm, Simon Horne wrote:
> Dave
>
> Do a level 5 trace and see if the H.263 capability actually loads and in
> the
> capability list. The plugin will not load unless it finds the FFMPEG
> library. If it is there then you will need to check that it actually gets
> negotiated, see if it is the common capability list in the trace file.
>
> The H.264 plugin should work if you are using the current CVS. Use a
> softphone like Mirial to test.
>
> Simon
>
> -----Original Message-----
> From: h323plus-bounces at lists.packetizer.com
> [mailto:h323plus-bounces at lists.packetizer.com] On Behalf Of Dave Smulsky
> Sent: Thursday, August 19, 2010 5:05 AM
> To: h323plus at lists.packetizer.com
> Subject: [h323plus] h323plus 1.22, ptlib 2.8.2, openmcu 2.2.5 - can't get
> H.263 to load
>
> I am having a terrible time trying to get basic H.263/264 plugins working
> on
> a vanilla Ubuntu 10.04 install.
>
> I installed ffmpeg, libavcodec-devel, x264, libx264-devel from ubuntu
> repos
>
> Compiled PTlib 2.8.2, set PTLIBDIR, compilied h323plus 1.22, set
> OPEN323DIR,
> configured and make installed h323plus/plugins (showed all the codecs as
> enabled), set PTLIBPLUGINDIR to the OPENH323DIR/plugins.
> Compiled openmcu 2.2.5 without issues...
>
> When I run openmcu, right out of the box H.261 and H.264 are enabled, but
> if
> I try to connect an endpoint (using Ekiga) it segfaults openmcu. If I
> disable h.264 via openmcu.ini, restart openmcu, I can connect an endpoint
> at
> H.261 CIF (which is terrible resolution and pretty much useless to me.
> The problem is I cant seem to get H.263 to load at all.
>
> Can someone that has had good results setting this up please shed some
> light
> on how to do it on a more recent OS like Ubuntu 10.04 or even RHEL5?
>
> Thanks
> Dave
>
>
More information about the h323plus
mailing list