[h323plus] Valid sessionID in OpenLogicalChannel command

Igor Pavlov pavlov.ig at gmail.com
Mon Dec 28 08:07:25 EST 2009


About H.264 plugin - actualy I have 3rd party static library for H.264
encoding/decoding and use H264 plugin as wrapper to connect library to
h323plus. I don't think anyone has interest of half working plugin without
static library...

28 декабря 2009 г. 15:57 пользователь Simon Horne
<s.horne at packetizer.com>написал:

>  Igor
>
> The problem is caused by an master/slave conflict when first opening the
> audio channel which results in the OLC being rejected. The correct
> process is to renegotiate the OLC. It appears that the T1000 cannot properly
> renegotiate the OLC and incorrectly allocates an invalid sessionID of 0
> which causes the assert and behavior you highlighted.
>
> I also see you are using a modified and working H.264 plugin and have
> decided not to contribute any of that work back to the project. This is a
> pity.
>
> Simon
>
>
>  ------------------------------
> *From:* Igor Pavlov [mailto:pavlov.ig at gmail.com]
> *Sent:* Monday, 28 December 2009 9:46 PM
> *To:* Simon Horne
> *Cc:* h323plus at lists.packetizer.com
> *Subject:* Re: [h323plus] Valid sessionID in OpenLogicalChannel command
>
> Sending log.
> T1000 in most cases after Reject sends OLC with sessionID=0, and in less
> cases send OLC with sessionID from 32 up to 53 (increase 1 after each
> reject).
>
>
> 2009/12/28 Simon Horne <s.horne at packetizer.com>
>
>>  Igor
>>
>> Session ID should never be zero. This is clearly an error coming from the
>> T1000 unit.
>>
>> Can you post a level 6 trace showing the condition the T1000 sends an OLC
>> with sessionID = 0
>>
>> Simon
>>
>>  ------------------------------
>> *From:* h323plus-bounces at lists.packetizer.com [mailto:
>> h323plus-bounces at lists.packetizer.com] *On Behalf Of *Igor Pavlov
>> *Sent:* Monday, 28 December 2009 8:25 PM
>> *To:* h323plus at lists.packetizer.com
>> *Subject:* [h323plus] Valid sessionID in OpenLogicalChannel command
>>
>>   Hi.
>>
>> I have problem when I reject OpenLogicalChannel (audio) while
>> communicating with Tandberg T1000.
>> In most cases Tandberg send me OpenLogicalChannel again with sessionID=0
>> so my application falls in assertion
>> in file rtp.cxx line 760 :
>> PAssert(id > 0 && id < 256, PInvalidParameter);
>>
>> I could not find valid value range for sessionID, but I don't like when
>> application crashes in this case :(
>> What can I do in this situation?
>>
>>
>> Igor Pavlov
>>
>
>
>
> --
> Игорь Павлов
>



-- 
Игорь Павлов
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.packetizer.com/pipermail/h323plus/attachments/20091228/8212fc45/attachment.htm>


More information about the h323plus mailing list