[h323plus] Valid sessionID in OpenLogicalChannel command

[Igor Pavlov]

Sending log.
T1000 in most cases after Reject sends OLC with sessionID=0, and in less
cases send OLC with sessionID from 32 up to 53 (increase 1 after each
reject).


2009/12/28 Simon Horne <s.horne at packetizer.com>

>  Igor
>
> Session ID should never be zero. This is clearly an error coming from the
> T1000 unit.
>
> Can you post a level 6 trace showing the condition the T1000 sends an OLC
> with sessionID = 0
>
> Simon
>
>  ------------------------------
> *From:* h323plus-bounces at lists.packetizer.com [mailto:
> h323plus-bounces at lists.packetizer.com] *On Behalf Of *Igor Pavlov
> *Sent:* Monday, 28 December 2009 8:25 PM
> *To:* h323plus at lists.packetizer.com
> *Subject:* [h323plus] Valid sessionID in OpenLogicalChannel command
>
> Hi.
>
> I have problem when I reject OpenLogicalChannel (audio) while communicating
> with Tandberg T1000.
> In most cases Tandberg send me OpenLogicalChannel again with sessionID=0 so
> my application falls in assertion
> in file rtp.cxx line 760 :
> PAssert(id > 0 && id < 256, PInvalidParameter);
>
> I could not find valid value range for sessionID, but I don't like when
> application crashes in this case :(
> What can I do in this situation?
>
>
> Igor Pavlov
>



-- 
Игорь Павлов
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.packetizer.com/pipermail/h323plus/attachments/20091228/6a0dd76f/attachment-0004.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: log1.log
Type: application/octet-stream
Size: 159409 bytes
Desc: not available
URL: <https://lists.packetizer.com/pipermail/h323plus/attachments/20091228/6a0dd76f/attachment-0004.obj>