[h323plus] MyPhone 0.4 Released

[JF NP]

Hi, Simon:

I've downloaded the latest CVS code with the support for bitrate, fps and Adaptive packet delay. But it seems that MyPhone2 is not using the settings. Let me explain this:
1. I've configured the following vlues for video: fps = 10, Maxbitrate =50 kbit/s. and quality = 15. Size = QCIF. 
2. If I capture the video packets with Wireskark, I can see that the bitrate is about 300kbit/s. 

Where is the problem? Am I missing any additional setup?

Best regards,

----- Mensaje original ----
De: Simon Horne <s.horne at packetizer.com>
Para: JF NP <jfnp090274 at yahoo.es>; H323plus <h323plus at lists.packetizer.com>
Enviado: viernes, 8 de febrero, 2008 3:53:05
Asunto: RE: [h323plus] MyPhone 0.4 Released



 
DIV {
MARGIN:0px;}



looks 
like you are right. 

I have 
added support for bitrate, fps and also adaptive packet delay to the 
CVS.

 

Simon


  -----Original Message-----
From: 
  h323plus-bounces at lists.packetizer.com 
  [mailto:h323plus-bounces at lists.packetizer.com]On Behalf Of JF 
  NP
Sent: Thursday, February 07, 2008 8:44 PM
To: 
  H323plus
Subject: Re: [h323plus] MyPhone 0.4 
  Released



  
  Hi,

I'v 
  been looking at MyPhone2 0.4 source code, and I was wondering how is the 
  videobitrate, fps, etc... managed, because I've seen that all of this 
  parameters are read from the configuration, but they are never used. 
  

Best regards,


  ----- 
  Mensaje original ----
De: Simon Horne 
  <s.horne at packetizer.com>
Para: H323plus 
  <h323plus at lists.packetizer.com>
Enviado: viernes, 1 de febrero, 2008 
  21:57:15
Asunto: [h323plus] MyPhone 0.4 Released


Guys

I 
  have uploaded MyPhone 0.4 installer to the h323plus website to garnish
some 
  feedback on the upcoming 1.20 release on h323plus.
Download here
http://www.h323plus.org/source/download/MyPhoneSetup04.exe 
  (2.12Mb)

Important Features
Native NAT traversal with GnuGk : This 
  uses the new GnuGk NAT module now in
H323plus. You can send and receive 
  calls behind a NAT when registered to
GnuGk on the public internet. The 
  only requirement is that you enable
SupportNatedEndpoints in GnuGk. Note 
  this is the GnuGk NAT Method
http://www.gnugk.org/nat-traversal.html. It is not the 
  standard H.460.18/19.

Built off the latest h323plus CVS. (hopefully the 
  baseline for v1.20)

Notes:
To run in debug mode start myphone with 
  commandline switches -ttttt (number
of t indicate tracelevel)
After 
  Install adjust the audio and video codecs to your preferred order.
G.711 
  & H.261 are the default.

The installer contains the full myphone2 
  source code. The exe was built with
vs2003. If you wish to build it with a 
  later version of visual studio,
although not tested, you will need the $ 
  version as the express version does
not seem to support 
  MFC.

Hopefully next week if there are not too many problems we will do 
  the
snapshot and release 
  v1.20.

Simon








  
  
¿Con Mascota por primera vez? - Sé un mejor 
  Amigo
Entra 
  en Yahoo! Respuestas.






       
______________________________________________ 
¿Con Mascota por primera vez? Sé un mejor Amigo. Entra en Yahoo! Respuestas http://es.answers.yahoo.com/info/welcome
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.packetizer.com/pipermail/h323plus/attachments/20080208/5e54195a/attachment.htm>