[h323plus] MyPhone 0.4 Released
JF NP
jfnp090274 at yahoo.es
Tue Feb 12 03:38:09 EST 2008
I,m sorry, Simon. It was my mistake. Now, it seems to work.
Thank you,
----- Mensaje original ----
De: Simon Horne <s.horne at packetizer.com>
Para: JF NP <jfnp090274 at yahoo.es>
CC: H323plus <h323plus at lists.packetizer.com>
Enviado: martes, 12 de febrero, 2008 9:02:48
Asunto: RE: [h323plus] MyPhone 0.4 Released
DIV {
MARGIN:0px;}
Ya'oops when a
decendent is not a descendent. :( I have checked in a fix to h323plus
CVS so the correct H323PluginVideoCodec::SetMaxBitRate() is
called.
Thanks
again
Simon
-----Original Message-----
From:
h323plus-bounces at lists.packetizer.com
[mailto:h323plus-bounces at lists.packetizer.com]On Behalf Of JF
NP
Sent: Tuesday, February 12, 2008 5:48 PM
To:
H323plus
Subject: Re: [h323plus] MyPhone 0.4
Released
Hi,
Simon,
I've traced down using the VS 2003 debugger, and the function which is being
called is H323VideoCodec::SetmaxBitRate(), because the function
OpenVideoChannel() receives a reference to H323VideoCodec, not to
H323PluginVideoCodec. You can see this easily setting a breakpoint in this
line codec.SetMaxBitRate(videoBitRate * 1024);, stepping into it and seeing
the call stack. Here it is:
>
MyPhone.exe!H323VideoCodec::SetMaxBitRate(unsigned int bitRate=52428800)
Line 737 C++
MyPhone.exe!CMyPhoneEndPoint::OpenVideoChannel(H323Connection &
connection={...}, int isEncoding=1, H323VideoCodec & codec={...})
Line 522 + 0x1d C++
MyPhone.exe!H323Connection::OpenVideoChannel(int isEncoding=1, H323VideoCodec
& codec={...}) Line 4361
C++
MyPhone.exe!H323VideoCodec::Open(H323Connection & connection={...})
Line 587 C++
MyPhone.exe!H323_RTPChannel::Open() Line 1171 + 0x18
C++
MyPhone.exe!H245NegLogicalChannel::OpenWhileLocked(const H323Capability &
capability={...}, unsigned int sessionID=2, unsigned int replacementFor=0,
unsigned int roleLabel=0) Line 843 + 0x19
C++
MyPhone.exe!H245NegLogicalChannel::Open(const
H323Capability & capability={...}, unsigned int sessionID=2, unsigned int
replacementFor=0, unsigned int roleLabel=0) Line 754 +
0x1b C++
MyPhone.exe!H245NegLogicalChannels::Open(const H323Capability &
capability={...}, unsigned int sessionID=2, H323ChannelNumber &
channelnumber={...}, unsigned int replacementFor=0, unsigned int
roleLabel=0) Line 1285 C++
MyPhone.exe!H245NegLogicalChannels::Open(const H323Capability &
capability={...}, unsigned int sessionID=2, unsigned int
replacementFor=0) Line 1262 + 0x1d
C++
MyPhone.exe!H323Connection::OpenLogicalChannel(const H323Capability &
capability={...}, unsigned int sessionID=2, H323Channel::Directions
dir=IsTransmitter) Line 4026 + 0x21
C++
MyPhone.exe!H323Connection::SelectDefaultLogicalChannel(unsigned int
sessionID=2) Line 3978 + 0x18
C++
MyPhone.exe!H323Connection::OnSelectLogicalChannels() Line
3923 C++
MyPhone.exe!H323Connection::InternalEstablishedConnectionCheck() Line
3887 C++
MyPhone.exe!H323Connection::HandleControlData(PPER_Stream &
strm={...}) Line 3040 C++
MyPhone.exe!H323Connection::HandleReceivedControlPDU(int readStatus=1,
PPER_Stream & strm={...}) Line 2968 + 0x12
C++
MyPhone.exe!H323Connection::HandleControlChannel() Line 2950 +
0x13 C++
MyPhone.exe!H245TransportThread::Main() Line 694
C++
MyPhone.exe!PThread::MainFunction(void *
threadPtr=0x0160fa48) Line 1268
C++
msvcr71d.dll!_threadstartex(void *
ptd=0x0160ff48) Line 241 + 0xd
C
kernel32.dll!7c80b683()
Best regards,
-----
Mensaje original ----
De: Simon Horne
<s.horne at packetizer.com>
Para: JF NP
<jfnp090274 at yahoo.es>
CC: H323plus
<h323plus at lists.packetizer.com>
Enviado: martes, 12 de febrero, 2008
2:09:55
Asunto: RE: [h323plus] MyPhone 0.4
Released
H323PluginVideoCodec::SetMaxBitRate() sends a messages
"Max Bit Rate" to the
plugin codec to set the maximum bitrate. This
function also overrides
H323VideoCodec::SetMaxBitRate() since
H323PluginVideoCodec is a descendent
of H323VideoCodec so the problem most
likely is in the plugin codec not
setting the max bit rate. I suggest you
look at the H.263 plugin codec
perhaps there is something
missing.
Simon
> -----Original Message-----
> From: h323plus-bounces at lists.packetizer.com
>
[mailto:h323plus-bounces at lists.packetizer.com]On
Behalf Of JF NP
> Sent: Tuesday, February 12, 2008 2:50 AM
> To:
H323plus
> Subject: Re: [h323plus] MyPhone 0.4
Released
>
>
> Hi,
>
> I've downloaded the
latest version of the plugin
> codecs from the CVS, and I've seen that
the frames are
> being grabbed at 10 fps.
> Additional testing has
showed me that the problem
> seems to be with the following line of
code, in
> CMyPhoneEndPoint::OpenVideoChannel:
>
codec.SetMaxBitRate(videoBitRate * 1024);
>
> I think that the
problem is that codec is an instance
> of H323VideoCodec, and the
implementation of
> H323VideoCodec::SetMaxBitRate does nothing but
an
> assignment. I think that what it should be called is
>
H323PluginVideoCodec::SetMaxBitRate, which is in fact
> a descendant of
H323VideoCodec. I've tried to do a
> cast from H323VideoCodec to
H323PluginVideoCodec, but
> I get compilation erros due to the undefined
class
> H323PluginVideoCodec, because in fact it is defined in
> a
*.cxx file, not a *.h.
>
> Am I correct? Or am I missing
something?
>
> Best regards,
>
> --- Simon Horne
<s.horne at packetizer.com>
escribió:
>
> > This is strange. The bitrate is sent to the
plugin
> > codec. What codec are you using? what version of
>
> h323plus and how old is your video plugin? I updated
> > the
H.263 plugin about a month or so ago, prior to
> > that it just
ignored these settings so that might be
> > the problem.
>
>
> > From the tracefile make sure the video frames are
>
> being grabbed at the right fps (for 10 fps every
> >
100ms)
> >
> > Simon
> > -----Original
Message-----
> > From: h323plus-bounces at lists.packetizer.com
>
> [mailto:h323plus-bounces at lists.packetizer.com]On
>
> Behalf Of JF NP
> > Sent: Friday, February 08, 2008 8:57
PM
> > To: H323plus
> > Subject: Re: [h323plus]
MyPhone 0.4 Released
> >
> >
> > Hi,
Simon:
> >
> > I've downloaded the latest CVS code
with the
> > support for bitrate, fps and Adaptive packet
delay.
> > But it seems that MyPhone2 is not using the
> >
settings. Let me explain this:
> > 1. I've configured the
following vlues for video:
> > fps = 10, Maxbitrate =50 kbit/s. and
quality = 15.
> > Size = QCIF.
> > 2. If I capture the
video packets with Wireskark,
> > I can see that the bitrate is about
300kbit/s.
> >
> > Where is the problem? Am I missing
any additional
> > setup?
> >
> > Best
regards,
> >
> >
> > ----- Mensaje original
----
> > De: Simon Horne <s.horne at packetizer.com>
>
> Para: JF NP <jfnp090274 at yahoo.es>;
H323plus
> > <h323plus at lists.packetizer.com>
>
> Enviado: viernes, 8 de febrero, 2008 3:53:05
> >
Asunto: RE: [h323plus] MyPhone 0.4 Released
> >
> >

> > looks like you are right.
> > I have
added support for bitrate, fps and also
> > adaptive packet delay to
the CVS.
> >
> > Simon
> >
-----Original Message-----
> > From: h323plus-bounces at lists.packetizer.com
>
> [mailto:h323plus-bounces at lists.packetizer.com]On
>
> Behalf Of JF NP
> > Sent: Thursday, February 07,
2008 8:44 PM
> > To: H323plus
> >
Subject: Re: [h323plus] MyPhone 0.4 Released
> >
> >
>
> Hi,
> >
> > I'v been looking
at MyPhone2 0.4 source code,
> > and I was wondering how is the
videobitrate, fps,
> > etc... managed, because I've seen that all of
this
> > parameters are read from the configuration, but they
>
> are never used.
> >
> > Best
regards,
> >
> >
> > ----- Mensaje
original ----
> > De: Simon Horne <s.horne at packetizer.com>
>
> Para: H323plus <h323plus at lists.packetizer.com>
>
> Enviado: viernes, 1 de febrero, 2008 21:57:15
>
> Asunto: [h323plus] MyPhone 0.4 Released
> >
>
>
> > Guys
> >
> > I
have uploaded MyPhone 0.4 installer to the
> > h323plus website to
garnish
> > some feedback on the upcoming 1.20 release
on
> > h323plus.
> > Download here
>
>
> >
> http://www.h323plus.org/source/download/MyPhoneSetup04.exe
>
> (2.12Mb)
> >
> > Important
Features
> > Native NAT traversal with GnuGk : This uses
the
> > new GnuGk NAT module now in
> >
H323plus. You can send and receive calls behind
> > a NAT when
registered to
> > GnuGk on the public internet. The
only
> > requirement is that you enable
> >
SupportNatedEndpoints in GnuGk. Note this is the
> > GnuGk NAT
Method
> > http://www.gnugk.org/nat-traversal.html. It is
> >
not the standard H.460.18/19.
> >
> > Built off
the latest h323plus CVS. (hopefully
> > the baseline for
v1.20)
> >
> > Notes:
> >
To run in debug mode start myphone with
> > commandline switches
-ttttt (number
> > of t indicate tracelevel)
>
> After Install adjust the audio and video codecs
> >
to your preferred order.
> > G.711 & H.261 are the
default.
> >
> > The installer contains the
full myphone2 source
> > code. The exe was built with
>
> vs2003. If you wish to build it with a later
> >
version of visual studio,
> > although not tested, you
will need the $ version
> > as the express version does
>
> not seem to support MFC.
> >
> >
Hopefully next week if there are not too many
> > problems we
will do the
> > snapshot and release v1.20.
>
>
> > Simon
> >
> >
>
>
> >
> >
> >
> >
> >
>
------------------------------------------------------------------
>
----------
> >
> > ¿Con Mascota por primera
vez? - Sé un mejor
> > Amigo
> > Entra en
Yahoo! Respuestas.
> >
> >
> >
> >
>
>
> >
>
------------------------------------------------------------------
>
------------
> >
> > ¿Con Mascota por primera vez? -
Sé un mejor
> > Amigo
> > Entra en Yahoo!
Respuestas.
> >
>
>
>
>
>
______________________________________________
> ¿Con Mascota por
primera vez? Sé un mejor Amigo. Entra en Yahoo!
> Respuestas http://es.answers.yahoo.com/info/welcome
¿Con Mascota por primera vez? - Sé un mejor
Amigo
Entra
en Yahoo! Respuestas.
______________________________________________
¿Con Mascota por primera vez? Sé un mejor Amigo. Entra en Yahoo! Respuestas http://es.answers.yahoo.com/info/welcome
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.packetizer.com/pipermail/h323plus/attachments/20080212/cb6a4908/attachment-0004.html>
More information about the h323plus
mailing list