[h323plus] Using H323+ for Asterisk's chan_h323

Vlasis Hatzistavrou (KTI) vhatz at kinetix.gr
Fri Nov 2 13:11:38 EDT 2007


Hello Simon,

I made quite some progress with chan_h323 and H323Plus.

The only problem that remains is that now Asterisk segfaults when the 
module unloads OR it is stopped (depending on the changes of the code, 
see below).

1) Initially, I traced the problem (first time user of gdb!!!) to when 
the function h323_end_process is called below, whenever the module is 
unloaded:

void h323_end_process(void)
{
         if (endPoint) {
                 endPoint->ClearAllCalls();
                 endPoint->RemoveListener(NULL);
                 delete endPoint;
                 endPoint = NULL;
         }
         if (localProcess) {
                 delete localProcess;
                 localProcess = NULL;
                 /* close(_timerChangePipe[0]); */
                 /* close(_timerChangePipe[1]); */
         }
         if (logstream) {
                 PTrace::SetLevel(0);
                 PTrace::SetStream(&cout);
                 delete logstream;
                 logstream = NULL;
        }
}


I have found out that the segfault will happen after asterisk exits 
PTrace::SetStream , so I assume that "delete logstream" must be causing 
the problem. The above code would cause a segfault when chan_h323.so was 
unloaded.

2) gdb showed that logstream (a class concerning the logs of chan_h323) 
is in fact deleted during "PTrace::SetStream", so I tried to comment out 
the " delete logstream; logstream = NULL;" part of the code.

This seemed to do the trick partially, because then the module 
chan_h323.so would load and unload any number of times. However, 
asterisk would segfault when it was stopped, even if chan_h323.so was 
unloaded.

A useful fact is that asterisk seems to exit first by giving a signal 
SIG32, and AFTER that it segfaults:

*CLI> stop now [asterisk's command to shut down]

Program received signal SIG32, Real-time event 32.
[Switching to Thread -1208759376 (LWP 17320)]
0x00bd77a2 in _dl_sysinfo_int80 () from /lib/ld-linux.so.2
(gdb) continue
Continuing.

Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread -1208756544 (LWP 17316)]
0x00322388 in PFactoryBase::FactoryMap::~FactoryMap () from 
/Downloads/h323p/ptlib_v1_12_0/lib/libpt_linux_x86_r.so.1.12.0
(gdb) where
#0  0x00322388 in PFactoryBase::FactoryMap::~FactoryMap ()
    from /Downloads/h323p/ptlib_v1_12_0/lib/libpt_linux_x86_r.so.1.12.0
#1  0x003223ce in __tcf_0 () from 
/Downloads/h323p/ptlib_v1_12_0/lib/libpt_linux_x86_r.so.1.12.0
#2  0x00c1a7a4 in __cxa_finalize () from /lib/tls/libc.so.6
#3  0x00225362 in __do_global_dtors_aux () from 
/Downloads/h323p/ptlib_v1_12_0/lib/libpt_linux_x86_r.so.1.12.0
#4  0x00322cb2 in _fini () from 
/Downloads/h323p/ptlib_v1_12_0/lib/libpt_linux_x86_r.so.1.12.0
#5  0x00be3907 in _dl_fini () from /lib/ld-linux.so.2
#6  0x00c1a527 in exit () from /lib/tls/libc.so.6
#7  0x0806c056 in quit_handler (num=Variable "num" is not available.
) at asterisk.c:1325
#8  0x0806c2c9 in handle_shutdown_now (fd=1, argc=2, argv=0xbff78b40) at 
asterisk.c:1504
#9  0x0808e1be in ast_cli_command (fd=1, s=0x9233068 "HG#\t¨<#\t") at 
cli.c:1979
#10 0x0806f718 in main (argc=2, argv=0xbff790c4) at asterisk.c:1395
#11 0x00c04de3 in __libc_start_main () from /lib/tls/libc.so.6
#12 0x08057ae1 in ?? ()

It seems that not deleting logstream explicitly leaves a lingering 
problem (where ???), but trying to delete it causes a segfault right 
then and there.

Note: As you can see in the code snippet above, I have just commented 
out the use of _timerChangePipe[], which was use in the destructor of 
MyProcess:

MyProcess::~MyProcess()
{
         _timerChangePipe[0] = timerChangePipe[0];
         _timerChangePipe[1] = timerChangePipe[1];
}


I have been trying to tackle this issue since quite a few days now with 
no serious progress, so any pointers as to where to look will be highly 
  appreciated...

Best regards,
Vlasis Hatzistavrou
Kinetix Tele.com International Inc.
306 Victoria House,
Victoria, Mahe,
Seychelles
Tel.: +302310556134
Fax: +302310556134 (ext. 0)
GSM: +306977835653
e-mail: vhatz at kinetixtele.com
http://www.kinetixtele.com

Postal address:
Monastiriou 9 & Enotikon
54627
Thessaloniki
Greece

Simon Horne wrote:
> Around October last year
> timerChangePipe[]
> was replaced by
> process.breakBlock;
> 
> I suggest you troll through the changelog
> http://openh323.cvs.sourceforge.net/openh323/pwlib/src/ptlib/unix/tlibthrd.c
> xx?view=log
> 
> There has been quite a few changes around october last year.
> 
> I hope this helps and we can move ahead with h323plus support in Asterisk.
> 
> Simon
> 
> -----Original Message-----
> From: Vlasis Hatzistavrou (KTI) [mailto:vhatz at kinetix.gr]
> Sent: Monday, 29 October 2007 6:44 PM
> To: Simon Horne
> Cc: Plamen Petkov; H323plus
> Subject: Re: [h323plus] Using H323+ for Asterisk's chan_h323
> 
> 
> Hello Simon,
> 
> Good news, chan_h323 is now able to use H323Plus!
> 
> :-)
> 
> There is only one small problem, it segfaults whenever the chan_h323.so
> module is unloaded or Asterisk is stopped (in which case the module is
> unloaded again). Otherwise everything is working as expected.
> 
> The problem for the segfault, however, is not related to H323. It seems
> that it is related with chan_h323's log stream which is a derivative
> class of PProcess. Apparently the PWLib/PTLib change had an effect on
> this and it segfaults whenever the logstream object is deleted.
> 
> I have the feeling that it is related to the timerChangePipe[] array
> which is missing in the newest PWLib versions.
> 
> I tried to find some documentation about this array but I couldn't find
> any. I'd be grateful if you could give me some pointers as to where to
> look for relevant information in order to wrap up chan_h323's transition
> to H323Plus.
> 
> Best regards,
> Vlasis Hatzistavrou
> Kinetix Tele.com International Inc.
> 306 Victoria House,
> Victoria, Mahe,
> Seychelles
> Tel.: +302310556134
> Fax: +302310556134 (ext. 0)
> GSM: +306977835653
> e-mail: vhatz at kinetixtele.com
> http://www.kinetixtele.com
> 
> Postal address:
> Monastiriou 9 & Enotikon
> 54627
> Thessaloniki
> Greece
> 
> Simon Horne wrote:
>> Plamen
>>
>> GnuGk has been test compiled with h323plus.
>>
>> Your error looks strange as it seems to like the code 2 lines above 656
>> which is identical . I suggest you look at code to see if you have not
>> accidently modified something particularily look at gk_const.h as well as
>> RasTbl.cxx:658
>>
>> I have fixed the warning message.
>>
>> Simon
>>
>> -----Original Message-----
>> From: Plamen Petkov [mailto:plamen at bg-tel.com]
>> Sent: Friday, 26 October 2007 2:57 AM
>> To: Simon Horne
>> Subject: Re: [h323plus] Using H323+ for Asterisk's chan_h323
>>
>>
>> Hello,
>> I try to compile Gnugk with H323plus.
>> That is the result:
>>
>> RasTbl.cxx:658: error: no matching function for call to
>> `H460_FeatureOID::Add(const char[2], H460_FeatureContent)'
>> /root/openh323/include/h460/h4601.h:969: note: candidates are:
>> H460_FeatureParameter& H460_FeatureOID::Add(const PString&,
>> H460_FeatureContent&)
>> RasTbl.cxx: In member function `void
> CallTable::OnQosMonitoringReport(const
>> PString&, const endptr&, H4609_QosMonitoringReportData&)':
>> RasTbl.cxx:2790: warning: unused variable 'addr'
>> make[1]: *** [obj_linux_x86_r/RasTbl.o] Error 1
>>
>> Regards:
>> Plamen
>>
>> ----- Original Message -----
>> From: "Simon Horne" <s.horne at packetizer.com>
>> To: <vhatz at kinetix.gr>; <h323plus at lists.packetizer.com>
>> Sent: Thursday, October 25, 2007 6:44 PM
>> Subject: Re: [h323plus] Using H323+ for Asterisk's chan_h323
>>
>>
>>> Vlasis
>>>
>>> I am not sure what chan_h323 looks like but there should be no need to
>>> have
>>> timerChangePipe I think this is a left over from very old code.
>>>
>>> Have a look at simple in the CVS
>>> http://h323plus.cvs.sourceforge.net/h323plus/applications/simple/
>>> to see how to define the PProcess
>>>
>>> Simon
>>>
>>> -----Original Message-----
>>> From: h323plus-bounces at lists.packetizer.com
>>> [mailto:h323plus-bounces at lists.packetizer.com]On Behalf Of Vlasis
>>> Hatzistavrou (KTI)
>>> Sent: Thursday, 25 October 2007 10:36 PM
>>> To: h323plus at lists.packetizer.com
>>> Subject: [h323plus] Using H323+ for Asterisk's chan_h323
>>>
>>>
>>> Hello all,
>>>
>>> I have been trying to compile chan_h323 with H323. It seems that I am
>>> almost done, although I get the following error:
>>>
>>> g++ -DNDEBUG -I../../include -include
>>> ../../include/asterisk/autoconfig.h -fPIC  -DP_USE_PRAGMA -D_REENTRANT
>>> -fno-exceptions  -Wall  -fPIC -DPIC -DNDEBUG
>>> -I/Downloads/h323p/ptlib_v1_12_0/include -DPTRACING
>>> -I/Downloads/h323p/h323plus/include -Os  -pipe -felide-constructors
>>> -Wreorder  -c ast_h323.cxx -o ast_h323.o
>>> ast_h323.cxx: In destructor `virtual MyProcess::~MyProcess()':
>>> ast_h323.cxx:194: error: `timerChangePipe' was not declared in this scope
>>> make[2]: *** [ast_h323.o] Error 1
>>> make[1]: *** [h323/libchanh323.a] Error 2
>>> make: *** [channels] Error 2
>>>
>>>
>>> I went through the PWLib 1.12.0, and there is no occurrence of
>>> "timerChangePipe". In previous versions of PWLib "timerChangePipe" was
>>> used in quite a few places in the code.
>>>
>>> I googled it, but I still don't know what it does.
>>>
>>> If I comment it out in the destructor MyProcess::~MyProcess() it
>>> compiles, but the channel driver segfaults as soon as it is loaded...
>>>
>>> --
>>> Best regards,
>>> Vlasis Hatzistavrou.
>>>
>>>
>>
> 
> 




More information about the h323plus mailing list