I'm not sure why the MG needs to know the OPC/DPC and CIC, there could just be a common naming of DS0s between the MGC and MG, and the MGC would map to OPC/DPC/CIC. However, if they are needed, then the Network Indicator (2 bits) should also be included. In addition, in the US (and China) SS7 Point Codes are 24 bits, and the CIC is 14 bits, not 14, 14 and 12 as shown in section 3.4

Steve Carr Unisphere Solutions

John Segers jsegers@LUCENT.COM on 07/26/99 10:33:24 AM

Please respond to Mailing list for parties associated with ITU-T Study Group 16 ITU-SG16@mailbag.cps.intel.com

To: ITU-SG16@mailbag.cps.intel.com cc: (bcc: Steve Carr/Internet/ICN) Subject: Documents uploaded

All,

I just uploaded the following documents for the Berlin meeting to ftp://standard.pictel.com/ftp/avc-site/Incoming/:

* apc-1612.zip Title: Proposing structured media and bearers for H.248 Source: Lucent Technologies, Intel Corporation, FORE Systems Inc., Teles AG

* apc-1613.zip Title: proposal for PUT and DELETE commands in H.248 Source: Lucent Technologies

* apc-1614.zip Title: Scripting framework for H.248 Source: Lucent Technologies

* apc-1615.zip Title: H.242 package for support of decomposed H.323-to-H.320 gateways in H.248 Source: Lucent Technologies

* apc-1632.zip Title: Structured syntax for H.248 Source: Lucent Technologies, Tech-Know-Ware, Intel Corporation, FORE Systems, VocalTec Communications, Teles AG

Regards,

John Segers -- John Segers email: jsegers@lucent.com Lucent Technologies Room HE 306 Dept. Forward Looking Work phone: +31 35 687 4724 P.O. Box 18, 1270 AA Huizen fax: +31 35 687 5954