I believe ITU will in fact provide the needed security features for inter-gatekeeper communication. The determined version of Annex G already has an authentication field in the zone exchange messages. However, providing such fields does not guarantee interoperability unless specific security mechanisms are mandated - which the ITU will probably not get into. This work - of specifying security profiles for interoperability - falls within IMTC VoIP and TIPHON.
Regarding Jan's comment, as Gur alluded to, Annex G's immediate focus is address resolution. Other features, I believe, will be added after this is tackled.
- Senthil
Senthil Sengodan Nokia Research Center, Boston ---------- From: Euchner Martin To: IMTC VoIP reflector; Klasen, Wolfgang; Euchner, Martin Subject: RE: Gk-GK Call signalling - security???? Date: Tuesday, October 13, 1998 3:11PM
I'm somewhat confused about the statement that Annex G security issues are not in the scope of ITU's work but inTiphon/IMTC.
From my impression of the recent ITU-T SG16 meeting in Geneva, the demand
for better security regarding the inter-GK scenario was very clearly expressed. For obvious reasons, ITU's work on defining enhancements in annex G implies to address also the security issues in an appropriate way. The requirements section in annex G lists already several security requirements, so this work item is already part of their work. Of course, there is no real need to invent new security solutions for annex G in case other standards bodies have some appropriate technology available that could be referenced for example. Whatever security solutions will come out, the result could very smoothly be described and added to the H.235 security recommendation. Note, that current H.235 provides already (some) security solutions to H.225.0; thus, annex G security features seem a natural enhancement to this work.
martin.
----------------------------------------------------------------------- | Dipl.-Inf. Phone: +49 89 636-46201 | Martin Euchner Fax : +49 89 636-48000 | Siemens AG | ZT IK 3 mailto:Martin.Euchner@mchp.siemens.de | | Otto-Hahn-Ring 6 | 81730 Muenchen | __________________ | Germany -----------------------------------------------------------------------
-----Original Message----- From: gur kimchi [SMTP:gur.kimchi@ETSI.FR] Sent: Dienstag, 13. Oktober 1998 14:21 To: TIPHON@LIST.ETSI.FR Subject: Re: Gk-GK Call signalling - security????
Hi Jan,
I attended the Q.13 meeting also - and The scope of Annex G is very well defined: it is attempting to introduce new mechanisms where none exist today. We could argue for hours whether there are inter-gk call-singalling mechanism today, and well, there are (H.225) - the main missing point there is security - which the ITU will not define anyway - but TIPHON (and VoIP).
e.g. the new mechanisms are Zone information Exchange.
- gur
-----Original Message----- From: Ericsson User [mailto:etxjaeh@AL.ETX.ERICSSON.SE] Sent: 13 October 1998 13:40 To: TIPHON Subject: Gk-GK Call signalling
Hello All, I participated in the SG 16 meeting in Geneva in september.
One thing that suprised me was that the ongoing work with Annex G (GK-GK signalling) did not consider call control, only the RAS signalling.
When I asked why, they did not understand why any change is required. After a while they understood that something could be needed, but it was postponed to future releases of H.323.
Future releases must be version 4 or something (around year 2001 or later ??).
The conclusion is then (looking on TIPHON project plan) that H.323 can't be used between Gatekeepers in TIPHON compliant system.
The question is then: What do we use then? ISUP? B-ISUP? SIP? Extended subset of H.323?
/Jan Holm Ericsson Telecom AB
ATTENTION !!! TIPHON list distribution parameters have changed: ==> if you REPLY to a TIPHON mail your mail will be sent to the original sender only. ==> if you use REPLY ALL your mail will be sent to TIPHON and to the original sender.
ATTENTION !!! TIPHON list distribution parameters have changed: ==> if you REPLY to a TIPHON mail your mail will be sent to the original sender only. ==> if you use REPLY ALL your mail will be sent to TIPHON and to the original sender.