-----Original Message----- From: Agboh, Charles Sent: Tuesday, December 12, 2000 6:41 PM To: ITU-SG16@MAILBAG.INTEL.COM Subject:
Hi Paul, all;
What is the maximum frame per second for H.261 and H.263? Is this indicated in the TCS? if yes, where in the OLC messages do I indicate the actual frame rate.
Regards, charles
-----Original Message----- From: Paul Long [mailto:plong@PACKETIZER.COM] Sent: Tuesday, December 12, 2000 5:34 PM To: ITU-SG16@MAILBAG.INTEL.COM Subject: Re: audio clock rate
Charles,
H.323 doesn't care what the audio clock rate is. That's specific to the audio encoding:
A.5.1/H.225.0v4: "The clock frequency is dependent on the format of data carried as payload and is specified statically in the profile or payload format specification that defines the format, or may be specified dynamically for payload formats defined through non-RTP means."
A.12/H.225.0v4: "For each payload type defined, the profile must specify the RTP timestamp clock rate to be used..."
Paul Long ipDialog, Inc.
-----Original Message----- From: Agboh, Charles [mailto:Charles.Agboh@GTS.COM] Sent: Tuesday, December 12, 2000 8:21 AM To: ITU-SG16@MAILBAG.INTEL.COM Subject: audio clock rate
Hi,
How can H.323 support audio clock rates higher than 8khz. Regards,
charles
------------8-)----------- Charles Agboh GTS RFC822: charles.agboh@gts.com Tel: +32 (0) 2 658 4243 mobile: +32 495 58 52 67 Fax: +32(0) 2 658 5118 http://www.gtsgroup.com
Quan Yin Method
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ For help on this mail list, send "HELP ITU-SG16" in a message to listserv@mailbag.intel.com
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ For help on this mail list, send "HELP ITU-SG16" in a message to listserv@mailbag.intel.com
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ For help on this mail list, send "HELP ITU-SG16" in a message to listserv@mailbag.intel.com