I looked back through my files.
It was set to 5 octets in TD33 that was submitted to SG16 in Geneva.
I've got a marked up version of TD-33a created 5 pm on 2/13 that still has 5 octets in it. TD-102 that was produced on 2/15/00 had it changed to 2 octets.
I could not find any contributions, delayed contributions or TDs that suggested changing this value, so I can only assume it was added during the discussions between 2/13 (Sun) and 2/15 (Tues).
At 03:08 PM 5/26/00 -0500, Tom-PT Taylor wrote:
I'm forwarding this to the SG 16 list copy the Megaco list because I think the MTP address was firmed up at Red Bank. Can anyone account for the failure to accommodate longer MTP addresses? Was it simply because the intention was to use Annex I transport within an ITU environment only? -----Original Message----- From: dacollins@notes.primeco.com [SMTP:dacollins@notes.primeco.com] Sent: Friday, May 26, 2000 1:03 PM To: Taylor, Tom-PT [NORSE:B901:EXCH] Subject: MEGACO errata
Hi Tom, Having had a look at the latest version of the MEGACO spec, I noticed something odd. The mId may be an MTP address. However, the MTP address is defined in both the ABNF and ASN.1 specifications as being 2 octets in length. The ASN.1 description provides a comment that the point code (PC) is 14 bits and the network indicator (NI) is two bits. This is only correct for the ITU version of SS7. In several countries, different versions of SS7 are used and different addressing schemes are used. In many countries, including the US, Canada and China, the PC is 24 bits long, with the NI still at two bits, for a total of 26 bits. Therefore, to use an MTP address for the mId in those countries, the definition of the mId needs to change.
I hope this helps in finalizing the spec.
Daniel Collins
------------------------------------------------------------------- Chip Sharp CTO Consulting Engineering Cisco Systems Reality - Love it or Leave it. http://www.netaid.org -------------------------------------------------------------------
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ For help on this mail list, send "HELP ITU-SG16" in a message to listserv@mailbag.intel.com