Chris,
I am not a native English speaker (1/3), sorry for the mistake. I understand things better now. Consider the following scenario;
A4:
An enpoint A (first-party) is switch off or does not "speak" H.323 (it supports RAS). I (third-party. i.e. IWF ) may want to be able to register this endpoint which we will call EP A. I register this endpoint with its "well-known" alias address which is binded to a transport addresses (not the one this EP usually uses when it is turned on. i.e. transport address of an H.323 complaint device like an answering machine called AM). The GK will now be able to route the call for EP A to the AM. For the EP that does not "speak" H.323 the signaling will go to some entity that will be able to "speak" H.323 and bind the RAS context created by the IWF (this may be the IWF itself).
A5: If I have a GK in my network, I may not allow "dubious" EPs to have direct access to my EP.
Regards,
charles
-----Original Message----- From: Chris Wayman Purvis [mailto:cwp@isdn-comms.co.uk] Sent: Friday, December 01, 2000 10:31 AM To: Agboh, Charles Cc: ITU-SG16@mailbag.cps.intel.com Subject: Re: Third party registration/group registration
Charles,
I'll take these two mails together, as the point is the same.
H.225.0 section 7.7 states which RAS messages are mandatory, optional etc. for different H.323 devices. By mandating the support of these messages, it mandates the support of RAS, since there is no proviso there for "when the EP/entity is supporting RAS".
An aside, from a famous UK 80s sitcom on the subject of "clarification": "You don't issue clarifications to MAKE things clear: you issue them to put you IN the clear."
Regards, Chris
-----Original Message----- From: Chris Wayman Purvis [mailto:cwp@ISDN-COMMS.CO.UK] Sent: Friday, December 01, 2000 10:46 AM To: ITU-SG16@MAILBAG.INTEL.COM Subject: Re: Third party registration/group registration
Paul,
I think we're starting to converge. Let's separate this out now, into separate questions:
Q1. Are endpoint devices (in which term I include gateways etc throughout this mail) required to implement RAS? A1. Yes (agreed between you and me, disagreed by Charles).
Q2. How does an endpoint device know whether or not a gatekeeper is present in the system, and hence whether or not to use RAS? A2a (Your position as I understand it.) Configuration, discovery on startup, give up if you don't find anything then. A2b (My suggestion) Configuration, discovery on startup, retry at some reasonable frequency (hourly?), take the three seconds to attempt gatekeeper discovery when someone makes a call to or from the endpoint in question. A2c (What we'll probably end up agreeing!) Implementation decision.
Q3. What should an endpoint do if it attempts to register with all discovered gatekeepers, where there is at least one gatekeeper in the system, and fails (RRJ)? A3a (My position) Shut itself down. A3b (Anybody elses) ???
Q4. Is Charles's actual application, where one entity is registering and hence presumably (although he's consistently failed to clarify) handling RAS on behalf of another compliant H.323 endpoint a possibility? A4a (My position, with which I THINK you agree) No, on the grounds that if the gateway/IWF can find a gatekeeper and use it, so can the endpoint. A4b (Charles) Yes.
This actually gives rise to a further question, which is (I believe) open, and probably shouldn't be: Q5. Can an endpoint be separated from its gatekeeper by a proxy?
Regards, Chris
Paul Long wrote:
Chris,
(You and I inadvertently replied to each other privately. I thought I'd clean my email up a bit :-) and post it to the reflector.)
As you point out, gatekeepers are optional, but an endpoint may not be registered with a gatekeeper (hence, an "unregistered endpoint"). I also agree with you that an endpoint must implement and be able to use RAS. The tricky part, though, is under what circumstances _shall_ an endpoint use RAS, i.e., at least attempt to register with a gatekeeper. It may come
down
to a rather philosophical question. If an endpoint is required to use RAS
in
any way and ultimately discover and register with a gatekeeper only if
there
is a gatekeeper in the "system," how does it know whether there is a gatekeeper within the system without using RAS? Look like a Catch-22, but
my
take on it is that whether a gatekeeper is in the system must be known out of band. That's the only way I know of to resolve these otherwise contradictory issues.
Smith Micro builds endpoints that can be used in systems with and without gatekeepers. Because this vendor does not know whether the system within which the user will be deploying the endpoint contains a gatekeeper, the user presumably knows and has the discretion as whether to use RAS via a Preferences dialog in the user interface. I think that's reasonable and compliant. Some vendors may build endpoints that are designed to always be used within systems that contain gatekeepers, and that's fine, too, and compliant. However, IMO, besides probably being a bad marketing decision :-), an endpoint that does not support RAS at all is not compliant.
Paul Long ipDialog, Inc.
-----Original Message----- From: Chris Wayman Purvis [mailto:cwp@ISDN-COMMS.CO.UK] Sent: Thursday, November 30, 2000 7:56 AM To: ITU-SG16@MAILBAG.INTEL.COM Subject: Re: Third party registration/group registration
Charles,
This comes up on this list every now and again, and the answer doesn't change. The gatekeeper is an optional entity: TRUE. RAS is optional: FALSE. Endpoints (including gateways, IWFs, whatever you want to call them) have
a
responsibility of trying to find one, registering with one if it can and SHUTTING ITSELF DOWN if it manages to find one or more gatekeepers but
fails
to register. Only if all reasonable attempts to find a gatekeeper fail
should
an H.323 endpoint operate without an active registration.
Let me give you the first couple of quotations from H.323 (I'm looking at
v4
determined, but I don't believe this has ever changed) I find on the subject. They're in section 7.2.2: "As part of their configuration process, all endpoints shall register..." "Registration shall occur before any calls are attempted and may occur periodically as necessary (for example, at endpoint power-up)."
Oh, and I suggest reading H.225.0 section 7.7 "Required Support of RAS messages" as well.
How else could things work? Consider the case where an endpoint (A) is trying to make a call to another endpoint (B). A issues an ARQ to its
gatekeeper,
asking permission to try a call; the gatekeeper rejects the call (ARJ) on some reasonable grounds (possibly a conceptual "do not disturb" notice B has
set
up with its gatekeeper). A thinks "stuff this", unregisters from its gatekeeper ("we don't want to worry about all that boring RAS stuff if it's going to
be
inconvenient to us") and sends the Setup message to B anyway - resulting
(at
best) in an disgruntled B. In other words, as soon as you allow endpoints to operate in the presence
of
a gatekeeper without registering with it and abiding by its decisions, you might as well write all xRJ messages out of the protocol entirely!
If an endpoint is going to ignore RAS (and hence the standard) then why should it bother having anyone else register on its behalf? I refer you to "Besides,..." in my last mail (which point you still haven't addressed).
Regards, Chris
For help on this mail list, send "HELP ITU-SG16" in a message to listserv@mailbag.intel.com
-- Dr Chris Purvis -- Development Manager ISDN Communications Ltd, The Stable Block, Ronans, Chavey Down Road Winkfield Row, Berkshire. RG42 6LY ENGLAND Phone: +44 1344 899 007 Fax: +44 1344 899 001
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ For help on this mail list, send "HELP ITU-SG16" in a message to listserv@mailbag.intel.com
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ For help on this mail list, send "HELP ITU-SG16" in a message to listserv@mailbag.intel.com