Mr Holdrege's comment is partially correct: the original BONDING document had no status recognizable by ITU-T. However, ISO has specified BONDING in ISO/IEC 13871-x (corrections were made to the original ISO version of this document, so it exists for more than one value of "x").
I don't, unfortunately, have the answer to Mr Thom's question.
Bob Webber PictureTel Corporation
matt@ASCEND.COM on 05/01/98 10:37:46 AM
Please respond to ITU-SG16@MAILBAG.INTEL.COM
To: ITU-SG16@MAILBAG.INTEL.COM cc: (bcc: Bob Webber) Subject: Re: [VideoPhone:828] [wg5-3: 1153] Bonding Manufacturers Code
BONDing is not a standard. It's an old industry specification regaring syncing multiple bearer channels. MP or Multilink PPP is IETF RFC 1990 but there are no manufacturer codes for MP. BACP is a control protocol for adding/removing links for MP.
At 10:57 PM 5/1/98 +0900, Yuichiro-Tuck-Takagawa wrote:
You means Bonding for ISDN? That is discussed by IETF:Internet Engineering Task Force. BACP:Bandwidth Allocation Control Protocol is very common in ISDN Terminal Adaptors or ISDN Routers in Japan.
Regards
Takagawa
At 09:34 98/05/01 -0800, Gary A. Thom wrote:
Can any one point me to the person/organization that assigns manufacturer codes for the Bonding standards???
Thanks Gary
Name : Gary A. Thom Company: Delta Information Systems, Inc. Address: 300 Welsh Rd., Bldg 3 Horsham, PA 19044 USA Phone : +1-215-657-5270 Fax : +1-215-657-5273 E-mail : gthom@delta-info.com
Yuichiro "Tuck" Takagawa Tel:+81-30-248-6357 Executive Manager Fax:+81-3-5359-5788 NTT Multimedia Business Dept. takagawa@mbd.mbc.ntt.co.jp
Emergency Internet Pager: 0361241374@page.docomonet.or.jp Private Home Page: http://village.infoweb.or.jp/~fwbc7006/
Post:3-19-2 Nishi-Shinjuku, Shinjuku-ku, Tokyo163-8019, Japan
Find my location on the "MAPION" of Cyber Map Japan by... http://www.mapion.co.jp/cgi-bin/m?no=2b036m-22nuwy&xy=132,516
Matt Holdrege http://www.ascend.com matt@ascend.com