Hi Everyone,
Annex A of recommendation H.225.0 states that "RTP uses an even port number and the corresponding RTCP stream uses the next higher (odd) port number".
Can anyone clarify what the RTCP port number should be if an endpoint uses two different RTP port numbers (one for transmitting and one for receiving).
To avoid confusion, I'll describe the specific scenario I'm trying to resolve;
Following completion of the H.245 capability exchange and master/slave determination, the following messages are exchanged to establish a pair of unidirectional media streams between the two endpoints.
1). A transmits an OpenLogicalChannel request to B specifying the port number (a1) that it will use to transmit the RTP packets
2). B transmits an OpenLogicalChannel request to A specifying the port number (b1) that it will use to transmit the RTP packets
3). B transmits an OpenLogicalChannelAck response to A specifying the port number (b2) which the RTP packets should be transmitted to
4). A transmits an OpenLogicalChannelAck response to B specifying the port number (a2) which the RTP packets should be transmitted to
Normally, a1 and a2 are the same so there is no confusion as to A's RTCP port number. However, the Phone Dialer application that comes with Windows 2000 does not use the same port numbers in the OLC and the OLCA messages.
Thanks,
Mohamed