Hi all, At some point after the call has been successfully set up, I need to renegotiate the audio (it could be video as well) media port. In my case, I developed a H323-SIP gateway (that does not handle media, only signaling conversion) and the SIP side sent a reinvite with a different audio port, so I need to make the H323 device send media to this new port. How can I accomplish this? (both in terms of the H323 protocol itself and implementing the solution using H323Plus). I appreciate any help, thanks.
Diego Carvalho Domingos
There is no need to reinvent the wheel. Use something existing and most fitting Your needs. For similar cases iI usually use Freeswitch. Just works, out of the box.
Tarmo
On 17 Apr 2017, at 22:52, Diego Carvalho Domingos ddomingos@daitangroup.com wrote:
Hi all, At some point after the call has been successfully set up, I need to renegotiate the audio (it could be video as well) media port. In my case, I developed a H323-SIP gateway (that does not handle media, only signaling conversion) and the SIP side sent a reinvite with a different audio port, so I need to make the H323 device send media to this new port. How can I accomplish this? (both in terms of the H323 protocol itself and implementing the solution using H323Plus). I appreciate any help, thanks.
Diego Carvalho Domingos
Hi Tarmo,
if you look closely, Diego is doing video. To my knowledge there is no free H.323-SIP gateway that supports video.
Regarding the port negotiation: The only way to change the ports is to close the logical channel and to open a new one. (as we discussed on the Packetizer board)
Regards, Jan
Thanks for answering Jan,
I tried that but then I realized that the port that the H323 device should send media to goes in the OLCA, so closing and reopening my local OLC does not help. I'm missing something here? After realizing that reopening the OLC would not help, I restarted the whole negotiation by sending an empty TCS and, after receiving the TCS Ack, a non-empty TCS. This in fact worked but I thought it's too complex. Would reverse logical channel parameters help here? If so, can you point me how to set that? I use (a subclass of) H323_ExternalRTPChannel. Thanks again. Regards,
Diego Carvalho Domingos
-----Original Message----- From: h323plus [mailto:h323plus-bounces@lists.packetizer.com] On Behalf Of Jan Willamowius Sent: quarta-feira, 19 de abril de 2017 12:10 To: h323plus@lists.packetizer.com Subject: Re: [h323plus] Renegotiate media port
Hi Tarmo,
if you look closely, Diego is doing video. To my knowledge there is no free H.323-SIP gateway that supports video.
Regarding the port negotiation: The only way to change the ports is to close the logical channel and to open a new one. (as we discussed on the Packetizer board)
Regards, Jan
-- Jan Willamowius, Founder of the GNU Gatekeeper Project EMail : jan@willamowius.de Website: https://www.gnugk.org Support: https://www.willamowius.com/gnugk-support.html
Relaxed Communications GmbH Frahmredder 91 22393 Hamburg Geschäftsführer: Jan Willamowius HRB 125261 (Amtsgericht Hamburg) USt-IdNr: DE286003584
kalazeez wrote:
There is no need to reinvent the wheel. Use something existing and most fitting Your needs. For similar cases iI usually use Freeswitch. Just works, out of the box.
Tarmo
On 17 Apr 2017, at 22:52, Diego Carvalho Domingos ddomingos@daitangroup.com wrote:
Hi all, At some point after the call has been successfully set up, I need to renegotiate the audio (it could be video as well) media port. In my case, I developed a H323-SIP gateway (that does not handle media, only signaling conversion) and the SIP side sent a reinvite with a different audio port, so I need to make the H323 device send media to this new port. How can I accomplish this? (both in terms of the H323 protocol itself and implementing the solution using H323Plus). I appreciate any help, thanks.
Diego Carvalho Domingos
participants (3)
-
Diego Carvalho Domingos -
Jan Willamowius -
kalazeez