Hi,
I'v been looking at MyPhone2 0.4 source code, and I was wondering how is the videobitrate, fps, etc... managed, because I've seen that all of this parameters are read from the configuration, but they are never used.
Best regards,
----- Mensaje original ---- De: Simon Horne s.horne@packetizer.com Para: H323plus h323plus@lists.packetizer.com Enviado: viernes, 1 de febrero, 2008 21:57:15 Asunto: [h323plus] MyPhone 0.4 Released
Guys
I have uploaded MyPhone 0.4 installer to the h323plus website to garnish some feedback on the upcoming 1.20 release on h323plus. Download here http://www.h323plus.org/source/download/MyPhoneSetup04.exe (2.12Mb)
Important Features Native NAT traversal with GnuGk : This uses the new GnuGk NAT module now in H323plus. You can send and receive calls behind a NAT when registered to GnuGk on the public internet. The only requirement is that you enable SupportNatedEndpoints in GnuGk. Note this is the GnuGk NAT Method http://www.gnugk.org/nat-traversal.html. It is not the standard H.460.18/19.
Built off the latest h323plus CVS. (hopefully the baseline for v1.20)
Notes: To run in debug mode start myphone with commandline switches -ttttt (number of t indicate tracelevel) After Install adjust the audio and video codecs to your preferred order. G.711 & H.261 are the default.
The installer contains the full myphone2 source code. The exe was built with vs2003. If you wish to build it with a later version of visual studio, although not tested, you will need the $ version as the express version does not seem to support MFC.
Hopefully next week if there are not too many problems we will do the snapshot and release v1.20.
Simon
______________________________________________ ¿Con Mascota por primera vez? Sé un mejor Amigo. Entra en Yahoo! Respuestas http://es.answers.yahoo.com/info/welcome
looks like you are right. I have added support for bitrate, fps and also adaptive packet delay to the CVS.
Simon -----Original Message----- From: h323plus-bounces@lists.packetizer.com [mailto:h323plus-bounces@lists.packetizer.com]On Behalf Of JF NP Sent: Thursday, February 07, 2008 8:44 PM To: H323plus Subject: Re: [h323plus] MyPhone 0.4 Released
Hi,
I'v been looking at MyPhone2 0.4 source code, and I was wondering how is the videobitrate, fps, etc... managed, because I've seen that all of this parameters are read from the configuration, but they are never used.
Best regards,
----- Mensaje original ---- De: Simon Horne s.horne@packetizer.com Para: H323plus h323plus@lists.packetizer.com Enviado: viernes, 1 de febrero, 2008 21:57:15 Asunto: [h323plus] MyPhone 0.4 Released
Guys
I have uploaded MyPhone 0.4 installer to the h323plus website to garnish some feedback on the upcoming 1.20 release on h323plus. Download here http://www.h323plus.org/source/download/MyPhoneSetup04.exe (2.12Mb)
Important Features Native NAT traversal with GnuGk : This uses the new GnuGk NAT module now in H323plus. You can send and receive calls behind a NAT when registered to GnuGk on the public internet. The only requirement is that you enable SupportNatedEndpoints in GnuGk. Note this is the GnuGk NAT Method http://www.gnugk.org/nat-traversal.html. It is not the standard H.460.18/19.
Built off the latest h323plus CVS. (hopefully the baseline for v1.20)
Notes: To run in debug mode start myphone with commandline switches -ttttt (number of t indicate tracelevel) After Install adjust the audio and video codecs to your preferred order. G.711 & H.261 are the default.
The installer contains the full myphone2 source code. The exe was built with vs2003. If you wish to build it with a later version of visual studio, although not tested, you will need the $ version as the express version does not seem to support MFC.
Hopefully next week if there are not too many problems we will do the snapshot and release v1.20.
Simon
------------------------------------------------------------------------------
¿Con Mascota por primera vez? - Sé un mejor Amigo Entra en Yahoo! Respuestas.
participants (2)
-
JF NP -
Simon Horne