Hi, Simon:
I've downloaded the latest CVS code with the support for bitrate, fps and Adaptive packet delay. But it seems that MyPhone2 is not using the settings. Let me explain this: 1. I've configured the following vlues for video: fps = 10, Maxbitrate =50 kbit/s. and quality = 15. Size = QCIF. 2. If I capture the video packets with Wireskark, I can see that the bitrate is about 300kbit/s.
Where is the problem? Am I missing any additional setup?
Best regards,
----- Mensaje original ---- De: Simon Horne s.horne@packetizer.com Para: JF NP jfnp090274@yahoo.es; H323plus h323plus@lists.packetizer.com Enviado: viernes, 8 de febrero, 2008 3:53:05 Asunto: RE: [h323plus] MyPhone 0.4 Released
DIV { MARGIN:0px;}
looks like you are right.
I have added support for bitrate, fps and also adaptive packet delay to the CVS.
Simon
-----Original Message----- From: h323plus-bounces@lists.packetizer.com [mailto:h323plus-bounces@lists.packetizer.com]On Behalf Of JF NP Sent: Thursday, February 07, 2008 8:44 PM To: H323plus Subject: Re: [h323plus] MyPhone 0.4 Released
Hi,
I'v been looking at MyPhone2 0.4 source code, and I was wondering how is the videobitrate, fps, etc... managed, because I've seen that all of this parameters are read from the configuration, but they are never used.
Best regards,
----- Mensaje original ---- De: Simon Horne s.horne@packetizer.com Para: H323plus h323plus@lists.packetizer.com Enviado: viernes, 1 de febrero, 2008 21:57:15 Asunto: [h323plus] MyPhone 0.4 Released
Guys
I have uploaded MyPhone 0.4 installer to the h323plus website to garnish some feedback on the upcoming 1.20 release on h323plus. Download here http://www.h323plus.org/source/download/MyPhoneSetup04.exe (2.12Mb)
Important Features Native NAT traversal with GnuGk : This uses the new GnuGk NAT module now in H323plus. You can send and receive calls behind a NAT when registered to GnuGk on the public internet. The only requirement is that you enable SupportNatedEndpoints in GnuGk. Note this is the GnuGk NAT Method http://www.gnugk.org/nat-traversal.html. It is not the standard H.460.18/19.
Built off the latest h323plus CVS. (hopefully the baseline for v1.20)
Notes: To run in debug mode start myphone with commandline switches -ttttt (number of t indicate tracelevel) After Install adjust the audio and video codecs to your preferred order. G.711 & H.261 are the default.
The installer contains the full myphone2 source code. The exe was built with vs2003. If you wish to build it with a later version of visual studio, although not tested, you will need the $ version as the express version does not seem to support MFC.
Hopefully next week if there are not too many problems we will do the snapshot and release v1.20.
Simon
¿Con Mascota por primera vez? - Sé un mejor Amigo Entra en Yahoo! Respuestas.
______________________________________________ ¿Con Mascota por primera vez? Sé un mejor Amigo. Entra en Yahoo! Respuestas http://es.answers.yahoo.com/info/welcome