Simon,
Thanks for valuable information. What is happening literally in a minimised case: I derived OnVideoChannel
on the Local endpoint
if (encoding)
{
codec.SetFrameSize(352, 288);
.....
}
else
{
cout << codec.GetWidth();
cout << codec.GetHeight();
// I receive CIF (ERROR)
.....
}
on the Remote endpoint
if (encoding)
{
codec.SetFrameSize(176, 144);
.....
}
else
{
cout << codec.GetWidth();
cout << codec.GetHeight();
// I receive CIF (normal)
.....
}
I looked into H323 trace Log, (remote endpoint which supposed to send QCIF)
PLUGIN Error encoding frame from plugin H.261-CIF
H245 Request CloseLogicalChannel
H323RTP Transmit H.261-CIF thread ended
It seems that the H.261 channel is closed prematurely. As my local
endpoint received an incorrect video size I suppose that local endpoint
causes remote to close the transmission channel.
Could this be related to the version of the plugin or h323plus lib
which I use? it's likely that the video resolution is sent before
codec.SetFrameSize is invoked!
Did you in practice used different video resolution under the same capability? e.g. CIF<->QCIF calls
Carlos
From: s.horne@spranto.com.au
To: unazona@hotmail.com; s.horne@packetizer.com; h323plus@lists.packetizer.com
Subject: RE: [h323plus] Video Resolution
Date: Fri, 15 Jan 2010 23:14:23 +1000
Carlos
The current behaviour is correct.
The old OpenH323 used to only send CIF with *-CIF{sw}
capability and only QCIF with *-QCIF{sw} . This was
changed with the video plugins so the capability could do up to CIF so
it would also supported QCIF. This is perfectly
H.245 legal.
In this way only 1 capability can do both frame sizes.
This is the way most manufacturers implement the capability
exchange.
The capability has a flag for the size it supports so the old CIF
capability used to say QCIF - 0 CIF - 1. So if you wanted to do QCIF you
had to use the *-QCIF{sw} capability as the QCIF flag in the *-CIF{sw} was 0.
This was changed so that the *-CIF{sw} capability had the QCIF flag so it could
also support QCIF. Then it was safe to remove the *-QCIF{sw} capability and only
exchange using the *-CIF{sw}.
Now SetVideoFrameSize() will set the global frame size limit so
regardless of the direction that will be the maximum size permitted (if CIF
only up to CIF capability is available). The codec.FrameSize() in the
MyH323Endpoint::OpenVideoChannel() allows the implementor to set the
actual frame size to send.
Is there something else I missed?
Simon
Simon,
Thanks for your quick answer, just noticed that I had a
bad thread name;)
Well, I have the codec.SetFrameSize(w, h); in my
OpenVideoChannel
When adding capabilities I
use
AddAllCapabilities(0, P_MAX_INDEX,
"*");
SetVideoFrameSize(H323Capability::cifMPI);
Capabilities
table shows as
Set 0: 0:
audio
1:
H.261-CIF{sw}
I receive an OpenVideoChannel for encoder, I open
channel and attach video reader + colourConverter, just after that I receive a
close video signal from a H245Negotation, here I join Call Stack
> testApp.exe!mmDDSVideoOutputBridge::close2() Ligne
359 C++
testApp.exe!mmVideoInputDevice::~mmVideoInputDevice() Ligne 43 +
0x1b C++
testApp.exe!mmVideoInputDevice::`scalar deleting destructor'() +
0x2b C++
testApp.exe!PVideoChannel::CloseVideoReader() Ligne 203 +
0x24 C++
testApp.exe!PVideoChannel::Close() Ligne 145
C++
testApp.exe!H323Codec::CloseRawDataChannel() Ligne 488 +
0x11 C++
testApp.exe!H323VideoCodec::Close() Ligne 747
C++
testApp.exe!H323Channel::CleanUpOnTermination() Ligne
716 C++
testApp.exe!H323_RTPChannel::CleanUpOnTermination() Ligne
1160 C++
testApp.exe!H245NegLogicalChannel::Release() Ligne 1219
C++
testApp.exe!H245NegLogicalChannel::HandleCloseAck(const
H245_CloseLogicalChannelAck & __formal={...}) Ligne
1086 C++
testApp.exe!H245NegLogicalChannels::HandleCloseAck(const
H245_CloseLogicalChannelAck & pdu={...}) Ligne 1372 +
0xf C++
testApp.exe!H323Connection::OnH245Response(const H323ControlPDU &
pdu={...}) Ligne 3293 + 0x22 C++
testApp.exe!H323Connection::HandleControlPDU(const H323ControlPDU &
pdu={...}) Ligne 3189 + 0x12 C++
testApp.exe!H323Connection::HandleControlData(PPER_Stream &
strm={...}) Ligne 3170 + 0x18 C++
testApp.exe!H323Connection::HandleReceivedControlPDU(bool readStatus=true,
PPER_Stream & strm={...}) Ligne 3103 + 0x12
C++
testApp.exe!H323Connection::HandleControlChannel() Ligne 3085 +
0x13 C++
testApp.exe!H245TransportThread::Main() Ligne 700
C++
If I remove the
"SetVideoFrameSize(H323Capability::cifMPI);", I get the following capabilities
set
1: H.261-CIF{sw}
H.261-QCIF{sw}
H.261{sw}
with exactly same
strange behaviour, QCIF is not sending while CIF is being received, by the way
qcif endpoint says
Local Video Codec - H.261-CIF{sw}
Local Resolution
- 176x144
Remote Video Codec - H.261-CIF{sw}
Remote Resolution -
352x288
I tried a "ReorderCapabilities(PStringArray("QCIF"));" after
my addcapabilities, I ended up with both endpoints using QCIF and ignoring my
SetFrameSize anyway!!
Is there a glitch using H323Plus video plugins? my
code works perfectly on openh323
stack.
"SetVideoFrameSize(H323Capability::cifMPI);" is supposed to define
a maximum video resolution?! as you said in API doc "... to set the maximum
framesize allowed to the specified value "
Is that usual to have
H.261-CIF with a QCIF resolution? On which order codec plugins can be added to
avoid such problems of negotiation?
Regards
From: s.horne@packetizer.com
To: unazona@hotmail.com;
h323plus@lists.packetizer.com
Subject: RE: [h323plus] Valid sessionID in
OpenLogicalChannel command
Date: Fri, 15 Jan 2010 08:12:54 +1000
Carlos
In your derived
H323EndPoint::OpenVideoChannel(()
(isEncoding)
codec.SetFrameSize(w,h);
Simon
Hello Guys,
I would like to have different frame sizes for two endpoints,
first I tried to play around with H323Endpoint::SetVideoFrameSize, but it seems
that part changes the maximum allowed size, which means that if I switch the
videoFrameSize to qCIF, I wouldn't be able to receive CIF from the other
endpoint. my test only received QCIF.
I tried also to modify the
OpalMediaFormat by using a GetWritableMediaFormat for a capability, that ended
with unusual CIF format while having a QCIF resolution.
On the other
hand, I looked Opal examples where they use an OpalManager, but unfortuntly that
seems incompatible with h323plus, while old openh323 tutorials and exampls don't
have any video plugins support.
How I can manage to receive and send
different resolutions (frame sizes) using H323plus?
I appreciate a lot
your help
Carlos
Discute avec tes amis partout, grâce à Messenger sur ton mobile. Cliquez ici !
Avec Internet Explorer, surfez en toute discrétion sur internet Cliquez ici !