So I still have the same issue, I have set the PTLIBPLUGINDIR env var.

Should the structure then be /usr/local/lib/ptlib and then each of the libraries? Or should they exist in codecs/ or codecs/audio/ and codecs/video/

I am right in thinking once these are placed properly OpenMCU should pick them up?  I don’t have to place them, then recompile OpenMCU do I?

Thanks very much,

Josh

From: h323plus-bounces@lists.packetizer.com [mailto:h323plus-bounces@lists.packetizer.com] On Behalf Of Simon Horne
Sent: Tuesday, November 17, 2009 5:17 PM
To: h323plus@lists.packetizer.com
Subject: Re: [h323plus] OpenMCU Codec issues

Josh

The default directory for plugins should be /usr/lib/ptlib unless you set the environment variable PTLIBPLUGINDIR to point to your plugin directory.

Simon

---

From: h323plus-bounces@lists.packetizer.com [mailto:h323plus-bounces@lists.packetizer.com] On Behalf Of Josh Barth
Sent: Wednesday, 18 November 2009 9:45 AM
To: 'h323plus@lists.packetizer.com'
Subject: [h323plus] OpenMCU Codec issues

I have the ptlib, h323plus, plugins, and openmcu from h323plus.org

I built each successfully, but I am not having any luck getting the additional codecs loaded when I launch OpenMCU, all I get is G.711.

Did I not build something right? In order I built, ptlib, h323plus, openmcu, plugins

Where should the codecs be located? (they are in /usr/local/lib/pwlib)

These are modular correct, I don’t need to re-compile h323plus or OpenMCU?

Here is my trace:

  0:00.081                      OpenMCU         Version 2.2.5 by H323plus on Unix Linux (2.6.26-2-sparc64-sparc64) at 2009/11/17 14:43:29.321

  0:00.082                      OpenMCU PWLib   File handle high water mark set: 15 Thread unblock pipe

  0:00.082                      OpenMCU PWLib   Created thread 0x162c78 H323 Listener:%0x

  0:00.083                      OpenMCU PWLib   File handle high water mark set: 16 PTCPSocket

  0:00.083                      OpenMCU H323    Started listener Listener[ip$*:1720]

  0:00.084                      OpenMCU PWLib   Thread high water mark set: 6

  0:00.085                      OpenMCU H323    FindCapability: "G.711-ALaw-64k{sw}"

  0:00.085                      OpenMCU H323    Added capability: G.711-ALaw-64k <1>

  0:00.085                      OpenMCU H323    FindCapability: "G.711-uLaw-64k{sw}"

  0:00.086                      OpenMCU H323    Added capability: G.711-uLaw-64k <2>

  0:00.086                      OpenMCU H323    FindCapability: "G.711-ALaw-64k{sw}"

  0:00.086                      OpenMCU H323    FindCapability: "G.711-uLaw-64k{sw}"

  0:00.086                      OpenMCU H323    FindCapability: "G.711-ALaw-64k{sw}"

  0:00.086                      OpenMCU H323    FindCapability: "G.711-uLaw-64k{sw}"

  0:00.087                      OpenMCU H323    FindCapability: "G.711-ALaw-64k{sw}"

  0:00.087                      OpenMCU H323    FindCapability: "G.711-uLaw-64k{sw}"

  0:00.087                      OpenMCU H323    FindCapability: "G.711-ALaw-64k{sw}"

  0:00.087                      OpenMCU H323    FindCapability: "G.711-uLaw-64k{sw}"

  0:00.087                      OpenMCU EXT     No Extended Capabilities found to load

  0:00.088                      OpenMCU H323    FindCapability: "*-QCIF*"

  0:00.088                      OpenMCU H323    FindCapability: "*-SQCIF*"

  0:00.088                      OpenMCU H323    Added capability: UserInput/hookflash <3>

  0:00.088                      OpenMCU H323    Added capability: UserInput/basicString <4>

  0:00.088                      OpenMCU H323    Added capability: UserInput/dtmf <5>

  0:00.089                      OpenMCU H323    Added capability: UserInput/RFC2833 <6>

  0:00.089                      OpenMCU H323    Added capability: UserInput/Navigation <7>

  0:00.089                      OpenMCU H323    Added capability: UserInput/Softkey <8>

  0:00.089                      OpenMCU H323    Added capability: UserInput/PointDevice <9>

  0:00.089                      OpenMCU H323    Added capability: UserInput/Modal <10>

  0:00.089                      OpenMCU MCU     Codecs (in preference order):

 Table:

   G.711-ALaw-64k <1>

   G.711-uLaw-64k <2>

   UserInput/hookflash <3>

   UserInput/basicString <4>

   UserInput/dtmf <5>

   UserInput/RFC2833 <6>

   UserInput/Navigation <7>

   UserInput/Softkey <8>

   UserInput/PointDevice <9>

   UserInput/Modal <10>

 Set:

   0:

     0:

       G.711-ALaw-64k <1>

       G.711-uLaw-64k <2>

     1:

     2:

       UserInput/hookflash <3>

       UserInput/basicString <4>

       UserInput/dtmf <5>

       UserInput/RFC2833 <6>

       UserInput/Navigation <7>

       UserInput/Softkey <8>

       UserInput/PointDevice <9>

       UserInput/Modal <10>

  0:00.094                      OpenMCU PWLib   File handle high water mark set: 17 PTCPSocket

  0:00.095                      OpenMCU PWLib   File handle high water mark set: 19 Thread unblock pipe

  0:00.095                      OpenMCU PWLib   Created thread 0x168620 HTTP Service

  0:00.095       H323 Listener:f6f8bb90 PWLib   Started thread 0x162c78 H323 Listener:f6f8bb90

  0:00.095       H323 Listener:f6f8bb90 H323    Awaiting TCP connections on port 1720

  0:00.095       H323 Listener:f6f8bb90 TCP     Waiting on socket accept on ip$*:1720