Simon,
I've traced down using the VS 2003 debugger, and the function which is
being called is H323VideoCodec::SetmaxBitRate(), because the function
OpenVideoChannel() receives a reference to H323VideoCodec, not to
H323PluginVideoCodec. You can see this easily setting a breakpoint in
this line codec.SetMaxBitRate(videoBitRate * 1024);, stepping into it
and seeing the call stack. Here it is:
>
MyPhone.exe!H323VideoCodec::SetMaxBitRate(unsigned int
bitRate=52428800) Line 737
C++
MyPhone.exe!CMyPhoneEndPoint::OpenVideoChannel(H323Connection &
connection={...}, int isEncoding=1, H323VideoCodec &
codec={...}) Line 522 + 0x1d
C++
MyPhone.exe!H323Connection::OpenVideoChannel(int isEncoding=1,
H323VideoCodec & codec={...}) Line 4361
C++
MyPhone.exe!H323VideoCodec::Open(H323Connection &
connection={...}) Line 587
C++
MyPhone.exe!H323_RTPChannel::Open() Line 1171 +
0x18 C++
MyPhone.exe!H245NegLogicalChannel::OpenWhileLocked(const H323Capability
& capability={...}, unsigned int sessionID=2, unsigned int
replacementFor=0, unsigned int roleLabel=0) Line 843 +
0x19 C++
MyPhone.exe!H245NegLogicalChannel::Open(const H323Capability &
capability={...}, unsigned int sessionID=2, unsigned int
replacementFor=0, unsigned int roleLabel=0) Line 754 +
0x1b C++
MyPhone.exe!H245NegLogicalChannels::Open(const H323Capability &
capability={...}, unsigned int sessionID=2, H323ChannelNumber &
channelnumber={...}, unsigned int replacementFor=0, unsigned int
roleLabel=0) Line 1285
C++
MyPhone.exe!H245NegLogicalChannels::Open(const H323Capability &
capability={...}, unsigned int sessionID=2, unsigned int
replacementFor=0) Line 1262 + 0x1d
C++
MyPhone.exe!H323Connection::OpenLogicalChannel(const H323Capability
& capability={...}, unsigned int sessionID=2,
H323Channel::Directions dir=IsTransmitter) Line 4026 +
0x21 C++
MyPhone.exe!H323Connection::SelectDefaultLogicalChannel(unsigned int
sessionID=2) Line 3978 + 0x18
C++
MyPhone.exe!H323Connection::OnSelectLogicalChannels() Line
3923 C++
MyPhone.exe!H323Connection::InternalEstablishedConnectionCheck()
Line 3887 C++
MyPhone.exe!H323Connection::HandleControlData(PPER_Stream &
strm={...}) Line 3040
C++
MyPhone.exe!H323Connection::HandleReceivedControlPDU(int readStatus=1,
PPER_Stream & strm={...}) Line 2968 + 0x12
C++
MyPhone.exe!H323Connection::HandleControlChannel() Line 2950 +
0x13 C++
MyPhone.exe!PThread::MainFunction(void *
threadPtr=0x0160fa48) Line 1268
C++
msvcr71d.dll!_threadstartex(void *
ptd=0x0160ff48) Line 241 + 0xd
C
-----
Mensaje original ----
De: Simon Horne
<s.horne@packetizer.com>
Para: JF NP
<jfnp090274@yahoo.es>
CC: H323plus
<h323plus@lists.packetizer.com>
Enviado: martes, 12 de febrero,
2008 2:09:55
Asunto: RE: [h323plus] MyPhone 0.4
Released
H323PluginVideoCodec::SetMaxBitRate() sends a
messages "Max Bit Rate" to the
plugin codec to set the maximum
bitrate. This function also overrides
H323VideoCodec::SetMaxBitRate()
since H323PluginVideoCodec is a descendent
of H323VideoCodec so the
problem most likely is in the plugin codec not
setting the max bit
rate. I suggest you look at the H.263 plugin codec
perhaps there is
something missing.
Simon
> -----Original
Message-----
> From:
h323plus-bounces@lists.packetizer.com>
[mailto:
h323plus-bounces@lists.packetizer.com]On
Behalf Of JF NP
> Sent: Tuesday, February 12, 2008 2:50 AM
>
To: H323plus
> Subject: Re: [h323plus] MyPhone 0.4
Released
>
>
> Hi,
>
> I've downloaded the
latest version of the plugin
> codecs from the CVS, and I've seen
that the frames are
> being grabbed at 10 fps.
> Additional
testing has showed me that the problem
> seems to be with the
following line of code, in
>
CMyPhoneEndPoint::OpenVideoChannel:
>
codec.SetMaxBitRate(videoBitRate * 1024);
>
> I think that
the problem is that codec is an instance
> of H323VideoCodec, and
the implementation of
> H323VideoCodec::SetMaxBitRate does nothing
but an
> assignment. I think that what it should be called
is
> H323PluginVideoCodec::SetMaxBitRate, which is in fact
>
a descendant of H323VideoCodec. I've tried to do a
> cast from
H323VideoCodec to H323PluginVideoCodec, but
> I get compilation
erros due to the undefined class
> H323PluginVideoCodec, because
in fact it is defined in
> a *.cxx file, not a
*.h.
>
> Am I correct? Or am I missing
something?
>
> Best regards,
>
> --- Simon Horne
<
s.horne@packetizer.com>
escribió:
>
> > This is strange. The bitrate is sent to
the plugin
> > codec. What codec are you using? what version
of
> > h323plus and how old is your video plugin? I
updated
> > the H.263 plugin about a month or so ago, prior
to
> > that it just ignored these settings so that might
be
> > the problem.
> >
> > From the
tracefile make sure the video frames are
> > being grabbed at
the right fps (for 10 fps every
> > 100ms)
> >
>
> Simon
> > -----Original Message-----
>
> From:
h323plus-bounces@lists.packetizer.com>
> [mailto:
h323plus-bounces@lists.packetizer.com]On
>
> Behalf Of JF NP
> > Sent: Friday, February 08, 2008
8:57 PM
> > To: H323plus
> > Subject: Re:
[h323plus] MyPhone 0.4 Released
> >
> >
>
> Hi, Simon:
> >
> > I've downloaded
the latest CVS code with the
> > support for bitrate, fps and
Adaptive packet delay.
> > But it seems that MyPhone2 is not
using the
> > settings. Let me explain this:
> >
1. I've configured the following vlues for video:
> > fps = 10,
Maxbitrate =50 kbit/s. and quality = 15.
> > Size =
QCIF.
> > 2. If I capture the video packets with
Wireskark,
> > I can see that the bitrate is about
300kbit/s.
> >
> > Where is the problem? Am I
missing any additional
> > setup?
> >
>
> Best regards,
> >
> >
> >
----- Mensaje original ----
> > De: Simon Horne <
s.horne@packetizer.com>
>
> Para: JF NP <
jfnp090274@yahoo.es>;
H323plus
> > <
h323plus@lists.packetizer.com>
>
> Enviado: viernes, 8 de febrero, 2008 3:53:05
>
> Asunto: RE: [h323plus] MyPhone 0.4 Released
>
>
> > 
> > looks like you are
right.
> > I have added support for bitrate, fps and
also
> > adaptive packet delay to the CVS.
> >
>
> Simon
> > -----Original
Message-----
> > From:
h323plus-bounces@lists.packetizer.com>
> [mailto:
h323plus-bounces@lists.packetizer.com]On
>
> Behalf Of JF NP
> > Sent: Thursday, February
07, 2008 8:44 PM
> > To: H323plus
>
> Subject: Re: [h323plus] MyPhone 0.4 Released
>
>
> >
> > Hi,
> >
>
> I'v been looking at MyPhone2 0.4 source code,
>
> and I was wondering how is the videobitrate, fps,
> >
etc... managed, because I've seen that all of this
> >
parameters are read from the configuration, but they
> > are
never used.
> >
> > Best regards,
>
>
> >
> > ----- Mensaje original
----
> > De: Simon Horne <
s.horne@packetizer.com>
>
> Para: H323plus <
h323plus@lists.packetizer.com>
>
> Enviado: viernes, 1 de febrero, 2008 21:57:15
>
> Asunto: [h323plus] MyPhone 0.4 Released
>
>
> >
> > Guys
> >
>
> I have uploaded MyPhone 0.4 installer to the
>
> h323plus website to garnish
> > some feedback
on the upcoming 1.20 release on
> > h323plus.
>
> Download here
> >
> >
>
http://www.h323plus.org/source/download/MyPhoneSetup04.exe>
> (2.12Mb)
> >
> > Important
Features
> > Native NAT traversal with GnuGk :
This uses the
> > new GnuGk NAT module now in
>
> H323plus. You can send and receive calls
behind
> > a NAT when registered to
> >
GnuGk on the public internet. The only
> > requirement is that
you enable
> > SupportNatedEndpoints in GnuGk.
Note this is the
> > GnuGk NAT Method
> >
http://www.gnugk.org/nat-traversal.html. It is
>
> not the standard H.460.18/19.
> >
> >
Built off the latest h323plus CVS. (hopefully
> > the
baseline for v1.20)
> >
> >
Notes:
> > To run in debug mode start myphone
with
> > commandline switches -ttttt (number
> >
of t indicate tracelevel)
> > After Install
adjust the audio and video codecs
> > to your preferred
order.
> > G.711 & H.261 are the
default.
> >
> > The installer contains
the full myphone2 source
> > code. The exe was built
with
> > vs2003. If you wish to build it with a
later
> > version of visual studio,
> >
although not tested, you will need the $ version
> > as the
express version does
> > not seem to support
MFC.
> >
> > Hopefully next week if there
are not too many
> > problems we will do the
> >
snapshot and release v1.20.
> >
> >
Simon
> >
> >
> >
> >
>
>
> >
> >
> >
>
------------------------------------------------------------------
>
----------
> >
> > ¿Con Mascota por
primera vez? - Sé un mejor
> > Amigo
> >
Entra en Yahoo! Respuestas.
> >
> >
>
>
> >
> >
> >
>
------------------------------------------------------------------
>
------------
> >
> > ¿Con Mascota por primera
vez? - Sé un mejor
> > Amigo
> > Entra en
Yahoo! Respuestas.
> >
>
>
>
>
>
______________________________________________
> ¿Con Mascota por
primera vez? Sé un mejor Amigo. Entra en Yahoo!
> Respuestas
http://es.answers.yahoo.com/info/welcome