Tamas
This is great. If the guys at FreeSwitch
need assistance then let me know.
Simon
Hello,
FreeSWITCH (www.freeswitch.org) has
basic H.323 support with mod_opal (based on OPAL) and mod_h323 (based on
h323plus) but the later is very experimental yet (some weeks old).
It could be good to have an eye on :)
Regards,
Tamas
ps.: I don't have experience with the topic but using FreeSWITHC for a while
and never looking back to asterisk.
Simon Horne írta:
Sebastian
Check out the h323plus chan_h323 driver
http://h323plus.cvs.sourceforge.net/viewvc/h323plus/extensions/Asterisk/
It has not been worked on for some time.
It would be good to add H.460.18/.19/.23/.24 support
to asterisk.
There is no gatekeeper registration support, this
needs to be done as well.
Simon
I wonder if someone can help out here. I am having
trouble with Asterisk Crashes caused by libpt and openh323 where I am using
Asterisk 1.6.2rc5 and h323plus v1.19.0Beta7 and ptlib v1.12.0. In this config
when compiling the 2 packages and then doing a make in the asterisk H323
directory it automatically activates the chan_h323 in the Menuselect options of
Asterisk and allows me to compile asterisk with h323plus support.
The problem I am having is that I am registering with a Nortel H323 GateKeeper
and when this looses the registry for some or other reason as a backup I send
the calls using a Gateway directly to the Nortel PBX. With this configuration
in v1.4.23 it was working perfecttly with openh323 v1.18.0 and pwlib v1.10.3.
The problem came when because of issues with openmfcr2 I needed to upgrade to
1.6 for the embedded openr2 support.
For this reason I am no trying to compile Asterisk 1.6.2.0rc5 with the latest
h323plus v1.22.0 and ptlib 2.6.5. At the moment once these 2 packages are
compiled it does not allow me to activate or select chan_h323 in the Asterisk
"make menuselect". How can this be activated?
I hope someone can help.
Sebastian