I
tried using PacPhone v2.0.5 but I couldn't connect to openMCU. I also found
that in the Video settings the bitrate and framerate configurations are
reversed. Also, I am using an analog HD camera through a usb capture card that
supports up to 4CIF but I could only transmit QCIF or VGA.
Do you think
the error with PVX and OpenMCU is in the ffmpeg decoder, an un-expected
header, or some other reason?
-----
Original Message ----
From: Simon Horne
<s.horne@packetizer.com>
To: Adrien Rudulier <rudz04@yahoo.ca>;
h323plus@lists.packetizer.com
Sent: Thursday, July 3, 2008 7:59:42
PM
Subject: RE: [h323plus] OpenMCU 4CIF Issues
Adrien
There are known outstanding issues with h323plus H.263 and
Polycom PVX and VS7000.
If
anyone can assist in resolving these issues, a contribution would be greatly
appreciated.
You can try using PacPhone it supports 4CIF
and is built off h323plus.
Simon
I am currently using the newest versions (as of July 2, 2008) of
ptlib(2.3.0), h323plus(1.20.5) and openmcu(2.2.4) from cvs on Ubuntu 8.04. I
installed the plugins correctly and openmcu runs fine. However when using
two polycom pvx clients to connect to openmcu using H.263 at 4CIF for both
transmitting and receiving, the video is blocky and very distorted. There is
no packet loss, the bitrate is set to 1920 kbps and the frame rate is a
constant 30 fps for both transmitting and receiving. I was wondering if the
problem is with openmcu or the pvx clients. Has anyone successfully used
4CIF resolution to be clear and smooth? Also, I had to massage the h.263
plugin code to get 4CIF to work with openmcu. Any help would greatly be
appreciated.
Adrien Rudulier
Instant message from any web browser! Try the new Yahoo! Canada Messenger for the Web
BETA