Hi again,
After more testing, and a search through the source code, I've seen that the AdaptivePacketDelay code is supposed to be included in the new plugin, so forget my previous post. Just another question: How can I set the qcifMPI, or cifMPI parameters??
Thank you in advance,
----- Mensaje original ---- De: Simon Horne s.horne@packetizer.com Para: JF NP jfnp090274@yahoo.es; H323plus h323plus@lists.packetizer.com Enviado: martes, 12 de febrero, 2008 10:44:16 Asunto: RE: [h323plus] MyPhone 0.4 Released
DIV { MARGIN:0px;}
If memory serves me right the openH323 version never handled I-Frames. I will relook at the plugin codec to see what we could of missed.
Simon
-----Original Message----- From: h323plus-bounces@lists.packetizer.com [mailto:h323plus-bounces@lists.packetizer.com]On Behalf Of JF NP Sent: Tuesday, February 12, 2008 7:08 PM To: H323plus Subject: Re: [h323plus] MyPhone 0.4 Released
Simon,
Unfortunately, even when the plugin codec code is called, MyPhone2 stills sending more video bandwidth than established. If I don´t move the camera, it sends about 50 kbps (the configured video bandwidth), but if I move the camera, to force sending I-Frames, the bandwidth increases until reaches more than twice the configured bandwidth. The same test works fine with the previous version of openh323 and MyPhone. What's happening? If you need them, I can send you Ethereal traces.
Best regards,
----- Mensaje original ---- De: Simon Horne s.horne@packetizer.com Para: JF NP jfnp090274@yahoo.es CC: H323plus h323plus@lists.packetizer.com Enviado: martes, 12 de febrero, 2008 9:02:48 Asunto: RE: [h323plus] MyPhone 0.4 Released
DIV { MARGIN:0px;}
Ya'oops when a decendent is not a descendent. :( I have checked in a fix to h323plus CVS so the correct H323PluginVideoCodec::SetMaxBitRate() is called.
Thanks again
Simon
-----Original Message----- From: h323plus-bounces@lists.packetizer.com [mailto:h323plus-bounces@lists.packetizer.com]On Behalf Of JF NP Sent: Tuesday, February 12, 2008 5:48 PM To: H323plus Subject: Re: [h323plus] MyPhone 0.4 Released
Hi,
Simon, I've traced down using the VS 2003 debugger, and the function which is being called is H323VideoCodec::SetmaxBitRate(), because the function OpenVideoChannel() receives a reference to H323VideoCodec, not to H323PluginVideoCodec. You can see this easily setting a breakpoint in this line codec.SetMaxBitRate(videoBitRate * 1024);, stepping into it and seeing the call stack. Here it is:
MyPhone.exe!H323VideoCodec::SetMaxBitRate(unsigned int bitRate=52428800) Line 737 C++
MyPhone.exe!CMyPhoneEndPoint::OpenVideoChannel(H323Connection & connection={...}, int isEncoding=1, H323VideoCodec & codec={...}) Line 522 + 0x1d C++
MyPhone.exe!H323Connection::OpenVideoChannel(int isEncoding=1, H323VideoCodec & codec={...}) Line 4361 C++
MyPhone.exe!H323VideoCodec::Open(H323Connection & connection={...}) Line 587 C++ MyPhone.exe!H323_RTPChannel::Open() Line 1171 + 0x18 C++
MyPhone.exe!H245NegLogicalChannel::OpenWhileLocked(const H323Capability & capability={...}, unsigned int sessionID=2, unsigned int replacementFor=0, unsigned int roleLabel=0) Line 843 + 0x19 C++
MyPhone.exe!H245NegLogicalChannel::Open(const H323Capability & capability={...}, unsigned int sessionID=2, unsigned int replacementFor=0, unsigned int roleLabel=0) Line 754 + 0x1b C++
MyPhone.exe!H245NegLogicalChannels::Open(const H323Capability & capability={...}, unsigned int sessionID=2, H323ChannelNumber & channelnumber={...}, unsigned int replacementFor=0, unsigned int roleLabel=0) Line 1285 C++
MyPhone.exe!H245NegLogicalChannels::Open(const H323Capability & capability={...}, unsigned int sessionID=2, unsigned int replacementFor=0) Line 1262 + 0x1d C++
MyPhone.exe!H323Connection::OpenLogicalChannel(const H323Capability & capability={...}, unsigned int sessionID=2, H323Channel::Directions dir=IsTransmitter) Line 4026 + 0x21 C++
MyPhone.exe!H323Connection::SelectDefaultLogicalChannel(unsigned int sessionID=2) Line 3978 + 0x18 C++
MyPhone.exe!H323Connection::OnSelectLogicalChannels() Line 3923 C++
MyPhone.exe!H323Connection::InternalEstablishedConnectionCheck() Line 3887 C++
MyPhone.exe!H323Connection::HandleControlData(PPER_Stream & strm={...}) Line 3040 C++
MyPhone.exe!H323Connection::HandleReceivedControlPDU(int readStatus=1, PPER_Stream & strm={...}) Line 2968 + 0x12 C++
MyPhone.exe!H323Connection::HandleControlChannel() Line 2950 + 0x13 C++
MyPhone.exe!H245TransportThread::Main() Line 694 C++ MyPhone.exe!PThread::MainFunction(void * threadPtr=0x0160fa48) Line 1268 C++ msvcr71d.dll!_threadstartex(void * ptd=0x0160ff48) Line 241 + 0xd C kernel32.dll!7c80b683()
Best regards,
----- Mensaje original ---- De: Simon Horne s.horne@packetizer.com Para: JF NP jfnp090274@yahoo.es CC: H323plus h323plus@lists.packetizer.com Enviado: martes, 12 de febrero, 2008 2:09:55 Asunto: RE: [h323plus] MyPhone 0.4 Released
H323PluginVideoCodec::SetMaxBitRate() sends a messages "Max Bit Rate" to the plugin codec to set the maximum bitrate. This function also overrides H323VideoCodec::SetMaxBitRate() since H323PluginVideoCodec is a descendent of H323VideoCodec so the problem most likely is in the plugin codec not setting the max bit rate. I suggest you look at the H.263 plugin codec perhaps there is something missing.
Simon
-----Original Message----- From:
h323plus-bounces@lists.packetizer.com
[mailto:h323plus-bounces@lists.packetizer.com]On Behalf Of JF NP
Sent: Tuesday, February 12, 2008 2:50 AM To:
H323plus
Subject: Re: [h323plus] MyPhone 0.4
Released
Hi,
I've downloaded the
latest version of the plugin
codecs from the CVS, and I've seen that
the frames are
being grabbed at 10 fps. Additional testing
has showed me that the problem
seems to be with the following line
of code, in
CMyPhoneEndPoint::OpenVideoChannel:
codec.SetMaxBitRate(videoBitRate * 1024);
I think that the
problem is that codec is an instance
of H323VideoCodec, and the
implementation of
H323VideoCodec::SetMaxBitRate does nothing but
an
assignment. I think that what it should be called is
H323PluginVideoCodec::SetMaxBitRate, which is in fact
a descendant
of H323VideoCodec. I've tried to do a
cast from H323VideoCodec to
H323PluginVideoCodec, but
I get compilation erros due to the
undefined class
H323PluginVideoCodec, because in fact it is defined
in
a *.cxx file, not a *.h.
Am I correct? Or am I
missing something?
Best regards,
--- Simon
Horne s.horne@packetizer.com escribió:
This is strange. The bitrate is sent to the
plugin
codec. What codec are you using? what version of
> h323plus and how old is your video plugin? I updated
the
H.263 plugin about a month or so ago, prior to
that it just
ignored these settings so that might be
the problem.
>
From the tracefile make sure the video frames are
> being grabbed at the right fps (for 10 fps every
100ms)
Simon -----Original
Message-----
From: h323plus-bounces@lists.packetizer.com
> [mailto:h323plus-bounces@lists.packetizer.com]On
> Behalf Of JF NP
Sent: Friday, February 08, 2008 8:57
PM
To: H323plus Subject: Re:
[h323plus] MyPhone 0.4 Released
Hi, Simon:
I've downloaded the latest CVS
code with the
support for bitrate, fps and Adaptive packet
delay.
But it seems that MyPhone2 is not using the
settings. Let me explain this:
- I've configured the
following vlues for video:
fps = 10, Maxbitrate =50 kbit/s. and
quality = 15.
Size = QCIF. 2. If I capture
the video packets with Wireskark,
I can see that the bitrate is
about 300kbit/s.
Where is the problem? Am I
missing any additional
setup?
Best regards,
----- Mensaje
original ----
De: Simon Horne s.horne@packetizer.com
> Para: JF NP jfnp090274@yahoo.es; H323plus
> Enviado: viernes, 8 de febrero, 2008 3:53:05
Asunto: RE: [h323plus] MyPhone 0.4 Released

looks like you are right. I have
added support for bitrate, fps and also
adaptive packet delay
to the CVS.
Simon
-----Original Message-----
From: h323plus-bounces@lists.packetizer.com
> [mailto:h323plus-bounces@lists.packetizer.com]On
> Behalf Of JF NP
Sent: Thursday, February 07,
2008 8:44 PM
To: H323plus
Subject: Re: [h323plus] MyPhone 0.4 Released
>
Hi,
I'v been looking at MyPhone2 0.4 source code,
and I was
wondering how is the videobitrate, fps,
etc... managed, because
I've seen that all of this
parameters are read from the
configuration, but they
are never used.
> Best regards,
----- Mensaje original ----
De: Simon Horne
> Para: H323plus h323plus@lists.packetizer.com
> Enviado: viernes, 1 de febrero, 2008 21:57:15
> Asunto: [h323plus] MyPhone 0.4 Released
>
Guys
> I have uploaded MyPhone 0.4 installer to the
h323plus website to garnish
some feedback on the
upcoming 1.20 release on
h323plus.
Download here
> (2.12Mb)
Important
Features
Native NAT traversal with GnuGk : This
uses the
new GnuGk NAT module now in
H323plus. You can send and receive calls behind
a NAT when
registered to
GnuGk on the public internet. The
only
requirement is that you enable
SupportNatedEndpoints in GnuGk. Note this is the
GnuGk NAT
Method
not the standard H.460.18/19.
Built
off the latest h323plus CVS. (hopefully
the baseline for
v1.20)
Notes:
To run in debug mode start myphone with
commandline
switches -ttttt (number
of t indicate
tracelevel)
After Install adjust the audio and
video codecs
to your preferred order.
G.711 & H.261 are the default.
The installer contains the full myphone2 source
code. The exe
was built with
vs2003. If you wish to build it
with a later
version of visual studio,
although not tested, you will need the $ version
as the
express version does
not seem to support
MFC.
Hopefully next week if there are
not too many
problems we will do the
snapshot and release v1.20.
Simon
>
------------------------------------------------------------------
----------
¿Con Mascota por primera
vez? - Sé un mejor
Amigo Entra en
Yahoo! Respuestas.
>
------------------------------------------------------------------
------------
¿Con Mascota por primera vez?
- Sé un mejor
Amigo Entra en Yahoo!
Respuestas.
______________________________________________
¿Con Mascota por
primera vez? Sé un mejor Amigo. Entra en Yahoo!
Respuestas http://es.answers.yahoo.com/info/welcome
¿Con Mascota por primera vez? - Sé un mejor Amigo Entra en Yahoo! Respuestas.
¿Con Mascota por primera vez? - Sé un mejor Amigo Entra en Yahoo! Respuestas.
______________________________________________ ¿Con Mascota por primera vez? Sé un mejor Amigo. Entra en Yahoo! Respuestas http://es.answers.yahoo.com/info/welcome