Sorry

It should be avcore-dev

So it should look like

sudo apt-get install libavcodec-dev libavformat-dev libavcore-dev

Thanks

Simon

From: Miller, Michael B [mailto:myk@illinois.edu]
Sent: 25 November 2011 04:28
To: Simon Horne
Subject: Re: [h323plus] OpenMCU not using video codecs

Simon,

In the H.263 instructions, you list libavcodec-dev twice.  Is that correct? or is there a 3rd dependency?

thanks,

Michael Miller
System Engineer
NCSA
217 649 0747
"If you're clear in your vision and trust the people in your team with clear objectives, they will invariably do their best to achieve everything desired, and usually deliver everything you could have hoped for and even more." -Paul Debevec

On Nov 24, 2011, at 12:14 PM, Simon Horne wrote:

Victor

Video codecs are plugins (external libraries) and H.263 and H.264 have dependencies that are required before they will build.

H.261

No dependencies. Make sure your copy the plugin to the same directory (or subDir) as the executable or set the PTLIBPLUGINDIR environmental variable to point to where the *plugin.so resides.

H.263

Dependency FFMPEG

for debian based systems

sudo apt-get install libavcodec-dev libavformat-dev libavcodec-dev

Goto H.261

H.264

Dependency FFMPEG (decode) and X264 (encode)

for debian based systems

sudo apt-get install libx264-dev

Goto H.263

Rerun ./configure and the codecs should then be available. Do a Make and the the *plugin.so should be in the h323plus/plugins directory. Copy them from there.

H.264 also has a *helper.so file which needs to be copied as well. This *MUST* be in the same directory as the executable. It does not understand the PTLIBPLUGINDIR environmental variable.

You should then be good to go.

To debug the codecs set the environmental variable PTLIB_TRACE_CODECS=4

You should see in the console the initial tests to check that all the dependencies are found at startup.

Simon

From: h323plus-bounces@lists.packetizer.com [mailto:h323plus-bounces@lists.packetizer.com] On Behalf Of Victor Zanozin
Sent: 24 November 2011 16:41
To: h323plus@lists.packetizer.com
Subject: [h323plus] OpenMCU not using video codecs

Hi everyone,

I’m having a lot of trouble setting up an OpenMCU server on either FreeBSD/Ubuntu (Ubuntu preferred).

On FreeBSD, after all the packages are installed I am seemingly limited to H.261 – The endpoints are capable of H.263/264, however I cannot get OpenMCU to use this codec.

On Ubuntu (my preferred system) OpenMCU preferences report the use of the G711 audio codecs, but do not even use the H.261 video codecs. There is no video output to any of the endpoints.

I think it might have to do with the codec installation on Ubuntu – How can I check if these are installed properly?

When I try to configure the h323plus install, I get the following:

=================== Plugin configuration ======================

prefix                           : /usr/local

exec_prefix                      : ${prefix}

libdir                           : ${exec_prefix}/lib

Audio Codec plugin install dir   : ${libdir}/opal-1.23.0/codecs/audio

Video Codec plugin install prefix: ${libdir}/opal-1.23.0/codecs/video

LID plugin install prefix        : ${libdir}/opal-1.23.0/lid

FAX plugin install prefix        : ${libdir}/opal-1.23.0/fax

                              GSM :  yes (internal)

                          gsm-amr :  yes

                             iLBC :  yes (internal)

                            Speex :  yes (internal, version 1.1.11.1)

                            LPC10 :  yes

                            G.726 :  yes

                        IMA_ADPCM :  yes

                              SBC :  no

                           H.261  :  yes

                           H.263  :  no (ffmpeg version)

                     H.263/H.263+ :  no

                           H.264  :  no

                          THEORA  :  yes

                    MPEG4 Part 2  :  no

                            CELT  :  no

                     SpanDSP FAX  :  no

                            CAPI  :  no

           Quicknet xJACK support :  no

         Voicetronics VPB support :  yes

                         OS Type  :  linux-gnu

                    Machine Type  :  i686

If all settings are OK, type make and make install

========================================================

Level 5 debug logs show:

  0:00.034                      OpenMCU MCU     Codecs (in preference order):

Table:

   G.711-ALaw-64k <1>

   G.711-uLaw-64k <2>

   UserInput/hookflash <3>

   UserInput/basicString <4>

   UserInput/dtmf <5>

   UserInput/RFC2833 <6>

   UserInput/Navigation <7>

   UserInput/Softkey <8>

   UserInput/PointDevice <9>

   UserInput/Modal <10>

Set:

   0:

     0:

       G.711-ALaw-64k <1>

       G.711-uLaw-64k <2>

     1:

     2:

       UserInput/hookflash <3>

       UserInput/basicString <4>

       UserInput/dtmf <5>

       UserInput/RFC2833 <6>

       UserInput/Navigation <7>

       UserInput/Softkey <8>

       UserInput/PointDevice <9>

      UserInput/Modal <10>

There seem to be no video codecs being found or loaded… I’m running the latest version of everything from the h323plus.org site, OpenMCU 2.2.5-1, h323plus 1.23.0.

I’ve added what I believe to be the video codec directories in the following locations (yes, it’s a mess):

/usr/local/lib/opal-1.23.0/plugins/video

/usr/local/lib/opal-1.23.0/codecs/video

/usr/local/lib/opal-1.23.0/codecs/video/video

/usr/local/lib/opal-1.23.0/temp/plugins/video

/usr/local/lib/opal-1.23.0/video

/usr/lib/ptlib/plugins/video

/usr/lib/ptlib/codecs/video

/usr/lib/ptlib/video

/usr/lib/ptlib-2.4.5/plugins/video

The contents of these are:

root@OpenMCU:/usr/lib/ptlib/codecs/video# ls

common  H.261-vic  H.263-1998  H.263-ffmpeg  H.264

I’m also seemingly missing the H.264 codec:

configure: h264 support disabled due to disabled dependency HAVE_H264_DECODER

checking enable H.264 support... no

Can anyone shed some light on this?

Thanks!

Victor