Sebastian
Check out
the h323plus chan_h323 driver
http://h323plus.cvs.sourceforge.net/viewvc/h323plus/extensions/Asterisk/
It has not been worked on for some time.
It would be good to add H.460.18/.19/.23/.24
support to asterisk.
There is no gatekeeper registration support,
this needs to be done as
well.
Simon
I wonder if someone can help out here. I am
having trouble with
Asterisk Crashes caused by libpt and openh323 where I am using Asterisk
1.6.2rc5 and h323plus v1.19.0Beta7 and ptlib v1.12.0. In this config
when
compiling the 2 packages and then doing a make in the asterisk H323
directory
it automatically activates the chan_h323 in the Menuselect options of
Asterisk
and allows me to compile asterisk with h323plus support.
The problem I am having is that I am registering with a Nortel H323
GateKeeper
and when this looses the registry for some or other reason as a backup
I send
the calls using a Gateway directly to the Nortel PBX. With this
configuration
in v1.4.23 it was working perfecttly with openh323 v1.18.0 and pwlib
v1.10.3.
The problem came when because of issues with openmfcr2 I needed to
upgrade to
1.6 for the embedded openr2 support.
For this reason I am no trying to compile Asterisk 1.6.2.0rc5 with the
latest
h323plus v1.22.0 and ptlib 2.6.5. At the moment once these 2 packages
are
compiled it does not allow me to activate or select chan_h323 in the
Asterisk
"make menuselect". How can this be activated?
I hope someone can help.
Sebastian