Igor
 
The problem is caused by an master/slave conflict when first opening the audio channel which results in the OLC being rejected. The correct process is to renegotiate the OLC. It appears that the T1000 cannot properly renegotiate the OLC and incorrectly allocates an invalid sessionID of 0 which causes the assert and behavior you highlighted.
 
I also see you are using a modified and working H.264 plugin and have decided not to contribute any of that work back to the project. This is a pity.
 
Simon
 

From: Igor Pavlov [mailto:pavlov.ig@gmail.com]
Sent: Monday, 28 December 2009 9:46 PM
To: Simon Horne
Cc: h323plus@lists.packetizer.com
Subject: Re: [h323plus] Valid sessionID in OpenLogicalChannel command

Sending log.
T1000 in most cases after Reject sends OLC with sessionID=0, and in less cases send OLC with sessionID from 32 up to 53 (increase 1 after each reject).


2009/12/28 Simon Horne <s.horne@packetizer.com>
Igor
 
Session ID should never be zero. This is clearly an error coming from the T1000 unit.
 
Can you post a level 6 trace showing the condition the T1000 sends an OLC with sessionID = 0
 
Simon

From: h323plus-bounces@lists.packetizer.com [mailto:h323plus-bounces@lists.packetizer.com] On Behalf Of Igor Pavlov
Sent: Monday, 28 December 2009 8:25 PM
To: h323plus@lists.packetizer.com
Subject: [h323plus] Valid sessionID in OpenLogicalChannel command

Hi.

I have problem when I reject OpenLogicalChannel (audio) while communicating with Tandberg T1000.
In most cases Tandberg send me OpenLogicalChannel again with sessionID=0 so my application falls in assertion
in file rtp.cxx line 760 :
PAssert(id > 0 && id < 256, PInvalidParameter);

I could not find valid value range for sessionID, but I don't like when application crashes in this case :(
What can I do in this situation?


Igor Pavlov



--
Игорь Павлов